Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Manufacturer: TOPRAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Core Depth [mm]: 22
- Core Length [mm]: 650
- Core Width [mm]: 328
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Name: Radiator
- Quality class: PJ
Lisainfo: IBIZA V (kvaliteediklass PJ) Additional information: IBIZA V (kvaliteediklass PJ)
- Quantity per packing unit: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Name: Radiator
- Quality class: P
Lisainfo: IBIZA V (kvaliteediklass P)
- Core Length [mm]: 650
- Core Width [mm]: 322
- Core Depth [mm]: 34
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: KAMOKA
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 308
- Core Depth [mm]: 26
- Supplementary Article/Info 2: with mounting parts
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Lisainfo: 650*328*26
- Additional information: 650*328*26
-
Vehicle Equipment: for vehicles with/
without air conditioning - Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
- Netopikkus [mm]: 655
- Netolaius [mm]: 340
- Netosügavus [mm]: 32
- Manufacturer: JPN
- Material: Aluminium
- Core Length [mm]: 649
- Core Width [mm]: 342
- Core Depth [mm]: 23
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: NRF
- Lisainfo: 650*340*23
- Additional information: 650*340*23
- Transmission Type: Manual Transmission
- Radiator type: Mechanically jointed cooling fins
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 328
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Manufacturer: TYC
- Engine Code: CUSA
- Core Width [mm]: 342
- Core Length [mm]: 649
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Name: MM BM1823
- Manufacturer: MAGNETI MARELLI
- Core Width [mm]: 650
- Core Length [mm]: 340
- Core Depth [mm]: 23
- Material: Aluminium
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Heating/Cooling: for vehicles without oil cooler
- Supplementary Article/Info 2: with coolant regulator
- Radiator type: Mechanically jointed cooling fins
- Weight [kg]: 3.01
- Manufacturer: VALEO
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 341
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 341
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Core Length [mm]: 648
- Core Width [mm]: 326
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
-
Lisainfo: Radiator,
648x326 mm, PL/ ALU -
Additional information: Radiator,
648x326 mm, PL/ ALU
- Core Depth [mm]: 26
- Core Length [mm]: 648
- Core Width [mm]: 328
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Name: Radiator
- Quality class: PJ
Lisainfo: A1 (kvaliteediklass PJ) Additional information: A1 (kvaliteediklass PJ)
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 322
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 640012
-
Lisainfo: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI -
Additional information: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 649
- Core Width [mm]: 340
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Cooling fins material: Aluminium
- Manufacturer: MAHLE
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Packaging width [cm]: 12
-
Net Weight [g]: 2,
529 - Packaging height [cm]: 48.5
- Packaging length [cm]: 83.5
- Name: MH CR1096000P
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Seal Material: Lead
- Core Depth [mm]: 0
- Core Length [mm]: 0
- Core Width [mm]: 0
- General Information: radiator; lead welding
- Manufacturer: VIKA
- Core Length [mm]: 645
- Core Width [mm]: 88
- Core Depth [mm]: 56
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 89
- Packaging width [cm]: 22
- Packaging height [cm]: 17
- Weight [kg]: 1.44
-
for OE number: 6R0145805E,
6R0145805H - Manufacturer: AKSDASIS
- Heating/Cooling: Auxiliary Radiator
- Material: Aluminium
- Core Length [mm]: 645
- Core Width [mm]: 88
- Core Depth [mm]: 56
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Lisainfo: 646*86*56
- Additional information: 646*86*56
- Cooling fins material: Aluminium
- Core Depth [mm]: 56
- Core Length [mm]: 646
- Core Width [mm]: 88
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: without expansion tank
-
Supplementary Article/Supplementary Info: with oil cooler,
with gaskets/ seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI -
Additional information: AUDI A 1 /
S 1 (8X) (10- ) 1.2 TFSI
- Radiator type: Brazed cooling fins
- Core Depth [mm]: 56
- Core Length [mm]: 646
- Core Width [mm]: 88
- Inlet Ø [mm]: 20
- Outlet Ø [mm]: 20
- Version: Charge Air Cooler
- Manufacturer: TYC OWIETLENIE
- Core Width [mm]: 646
- Core Length [mm]: 86
- Core Depth [mm]: 56
- Material: Aluminium
- Housing Type: Synthetic Material Housing
- Weight [kg]: 2.05
- Name: VA 735310
- Manufacturer: VALEO
Heating/Cooling: Auxiliary Radiator, for vehicles without oil cooler
- Construction Year from: 10.2015
- Construction Year to: 07.2018
- Engine Code: CUSA
-
Transmission Type: 5-
Speed Manual Transmission - Core Length [mm]: 646
- Core Depth [mm]: 56
- Core Width [mm]: 88
- Radiator type: Brazed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Name: MM BM1668
- Manufacturer: MAGNETI MARELLI
- Core Depth [mm]: 56
- Core Length [mm]: 645
- Core Width [mm]: 88
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Quality class: PJ
- Name: Radiator
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks