Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Rim Hole Number: 5
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with integrated wheel bearing
- Manufacturer: JP GROUP
- Lisainfo: Wheel Hub
- Additional information: Wheel Hub
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 136.5
- Outer Diameter 2 [mm]: 65
- Outer Diameter 1 [mm]: 85
- Width 2 [mm]: 48
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713610980
- Lisainfo: 713 6109 80 FAG
- Additional information: 713 6109 80 FAG
- Fitting Position: Rear Axle
- Flange Diameter [mm]: 136.9
- Supplementary Article/Info 2: with integrated ABS sensor
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Rim Hole Number: 5
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Rear Axle
- Bolt Length [mm]: 59
- Outer Diameter 2 [mm]: 136.9
- Number of mounting bores: 5
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 86
- Outer Diameter [mm]: 136.5
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Inner Diameter 2 [mm]: 32
- Manufacturer: GSP
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 32
- Manufacturer: TOPRAN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with grease cap, with screw General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Width [mm]: 67.7
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136.5
- Manufacturer: JPN
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Flange Diameter [mm]: 136.9
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel hub
- Fitting Position: Rear Axle
- Braking/Driving Dynamics: for vehicles with ABS
- Inner Diameter 1 [mm]: 32
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Version: One
-
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 86
- Outer Diameter [mm]: 136.5
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Inner Diameter 2 [mm]: 32
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Number of Holes: 5
- Weight [kg]: 2.366
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Required quantity: 2
- Bolt Hole Circle Ø [mm]: 112
- Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Bearing Type: Angular Ball Bearing
- General Information: wheel hub with bearing; rear
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 137
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Manufacturer: OPTIMAL
- Additional information: 102019A
- Lisainfo: 102019A
- Fitting Position: Rear Axle
- Weight [kg]: 2.425
- Packaging length [cm]: 16
- Packaging width [cm]: 16
- Packaging height [cm]: 11
- Outer Diameter [mm]: 136.5
- Inner Diameter [mm]: 32
- Width [mm]: 67.7
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 136.5
- Inner Diameter [mm]: 32
- Width [mm]: 67.7
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713611000
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Flange Diameter [mm]: 136.4
- Outer Diameter 1 [mm]: 85
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel hub
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Vehicle configuration line / variant: REAR LR+RE LR+RE
- for OE number: 3G0598611A
- Inner Diameter [mm]: 32
- Width 1 [mm]: 70
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 5
- Name: DA KWD1005
- Manufacturer: DAYCO
- Engine Code: DCXA
- Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Bolt Hole Circle Ø [mm]: 112
- Number of Holes: 5
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 2.366
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Observe service information:
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 23320 FEBI
- Additional information: 23320 FEBI
Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN): [;8P-
4- 162 000] -
Fitting Position: Right,
Left, Rear Axle - Number of Holes: 5
- Supplementary Article/Info 2: with rubber mount
- Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 136
- Width 1 [mm]: 69
- Rotation angle [°]: 180
- Tightening Torque [Nm]: 200
- Manufacturer: SNR
- Name: SN R154.54
- Outer Diameter [mm]: 85
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
VW- 023 - Manufacturer: NTY
Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: DCXA
- Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Bolt Hole Circle Ø [mm]: 112
- Number of Holes: 5
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 2.366
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Observe service information:
- Name: SW 32 92 3320
- Manufacturer: SWAG
Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Required quantity: 2
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Flange Diameter [mm]: 136.9
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Manufacturer: SKF
- Name: SK VKBA3644
- Number of Holes: 5
- Outer Diameter [mm]: 137
- Braking/Driving Dynamics: for vehicles with ABS
-
Width [mm]: 69,
70 - Inner Diameter [mm]: 32
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Fitting Position: Rear Axle
- Manufacturer: VAICO
Supplementary Article/Info 2: with integrated magnetic sensor ring, with wheel bearing General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Width [mm]: 84
- Internal Toothing wheel side: 36
- Outer Diameter 2 [mm]: 136.4
- Number of mounting bores: 5
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
- Outer Diameter [mm]: 136
- Inner Diameter [mm]: 32
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
Supplementary Article/Info 2: with integrated magnetic sensor ring, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with integrated ABS sensor
- Rim Hole Number: 5
- Manufacturer: KAMOKA
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 136
- Width 1 [mm]: 70
- Rim Hole Number: 5
- Weight [kg]: 2.64
- Number of Teeth, ABS ring: 86
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Thread Size: M14 x 1.5
- Bolt Hole Circle Ø [mm]: 112
- Manufacturer: ABS
- Fitting Position: Rear Axle
- General Information: wheel hub with bearing; rear; with dust cover
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle Left,
Front Axle Right, Front Axle - Block Separation:
- Outer Diameter [mm]: 136
- Braking/Driving Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 3.45
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 112
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV264
- Fitting Position: Front
- General Information: wheel hub with bearing; front
- Manufacturer: BORSEHUNG
- Lisainfo: B19118
- Additional information: B19118
- Fitting Position: Front Axle
- Inner Diameter [mm]: 30
-
Outer Diameter [mm]: 137,
85 - Supplementary Article/Info 2: with integrated magnetic sensor ring
- Number of mounting bores: 3
- Number of Teeth on input shaft: 36
- Manufacturer: OPTIMAL
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle configuration line / variant: FRRE LR+FR LR+FR
- for OE number: 8S0498625A
- Inner Diameter [mm]: 29
- Width 1 [mm]: 67
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Manufacturer: DAYCO ZESTAWY LOZYSK KOL
- Fitting Position: Front Axle
- Weight [kg]: 3.483
- Packaging length [cm]: 15.6
- Packaging width [cm]: 15.6
- Packaging height [cm]: 9.6
- Supplementary Article/Info 2: with ABS sensor ring
- Outer Diameter [mm]: 136.5
- Outer Diameter 1 [mm]: 85
- Outer Diameter 2 [mm]: 65
- Width 2 [mm]: 48
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Quantity: 2
- Fitting Position: Front Axle
- Thickness [mm]: 85
- Weight [kg]: 3.08
- Supplementary Article/Info 2: without bolts
- Required quantity: 2
- Bolt Hole Circle Ø [mm]: 112
- Width [mm]: 137
- Inner Diameter [mm]: 29
- Outer Diameter [mm]: 137
- Bearing Type: Angular Ball Bearing
- General Information: wheel hub with bearing; front; without bolts
- Manufacturer: VIKA
-
Fitting Position: Right,
Left, Rear Axle, Front Axle - Inner Diameter 1 [mm]: 28
- Width 1 [mm]: 84
- Outer Diameter 1 [mm]: 136
- Tightening Torque [Nm]: 200
- Rotation angle [°]: 180
- Manufacturer: SNR
- Name: SN R154.69
- Fitting Position: Front Axle
- Required quantity: 2
- Flange Diameter [mm]: 136.4
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter 1 [mm]: 85
- Manufacturer: SKF
- Name: SK VKBA7011
- Lisainfo: VKBA 7011 SKF
- Additional information: VKBA 7011 SKF
- Fitting Position: Front
- Supplementary Article/Info 2: with bolts
- General Information: wheelhub with bearing; front; with screws
- Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Observe dimensions:
- Outer Diameter 1 [mm]: 85
- Outer Diameter 2 [mm]: 136
- Manufacturer: METZGER
Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks