• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Rear Axle both sides
• General Information: protective pipe
• Manufacturer: BORSEHUNG

• Vehicle Equipment: for vehicles without level control
• Fitting Position: Rear Axle
• Axle: Independent wheel suspension
• Material: Thermoplast
• Height [mm]: 230
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 230
• Material: Thermoplast
• Weight [g]: 72
• Diameter 1 [mm]: 59
• Diameter 2 [mm]: 66
• Name: IM 37969
• Manufacturer: ORIGINAL IMPERIUM

• Thickness [mm]: 230
• Material: Thermoplast
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.07
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. AUDI/SKODA/SEAT

• Fitting Position: Front Axle both sides
• General Information: dust boot
• Manufacturer: BORSEHUNG

• Thickness [mm]: 230
• Material: Thermoplast
• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: SW 30 94 5893
• Manufacturer: SWAG
• Lisainfo: 30 94 5893 SWA
• Additional information: 30 94 5893 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thickness [mm]: 172
• Material: Thermoplastic polyester elastomer
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.07
• Name: KAITSEMšTS/KAITSEKUMM,AMORT
• Manufacturer: FEB
• Lisainfo: 46720 FEBI
• Additional information: 46720 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Name: CFD PK4210
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Fabrication Number: A-AU-032
• Manufacturer: NTY

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• max. length [mm]: 625
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Axle: Four-Link Axle
• Manufacturer: DENCKERMANN AMORTYZATORY
• Lisainfo: DSF211G DKM
• Additional information: DSF211G DKM

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Socket Width 1 [mm]: 56
• Manufacturer: JAPKO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without height-adjustable suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Socket Width 1 [mm]: 56
• Manufacturer: ASHIKA
• Lisainfo: MA-00827
• Additional information: MA-00827

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without height-adjustable suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Socket Width 1 [mm]: 56
• Name: AMORT
• Manufacturer: JPA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without height-adjustable suspension, for vehicles without electronic suspension control

• Check OE number:
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Axle: Four-Link Axle
• Article number of recommended accessories: 72-3367
• Name: Amort
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Diameter [mm]: 45
• Length [mm]: 630
• Manufacturer: KAVO

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-AU-029
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Distance of mounting bores [mm]: 59
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY
• Lisainfo: 1267250017
• Additional information: 1267250017

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Name: MM 8048G
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.836
• Length 1 [mm]: 409
• Length 2 [mm]: 631
• Article number of recommended accessories: MK503, PK424, PK472
• Packaging length [cm]: 60
• Packaging width [cm]: 7
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Piston Rod Diameter [mm]: 13
• Shock absorber eyelet diameter [mm]: 59
• max. length [mm]: 625
• Name: Amort
• Manufacturer: KYB
• Additional information: 3448024 KAYABA
• Lisainfo: 3448024 KAYABA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without height-adjustable suspension, for vehicles without electronic suspension control

• not for vehicle type: Scout
• for PR number: 0N4, G03, G04, G05, G06, G07
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Lisainfo: 19-232362
• Additional information: 19-232362

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Diameter [mm]: 55
• Manufacturer: KAVO PARTS

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-394366, GH-369964, GH-399961, GH-693610
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV30/13X170A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Axle: Four-Link Axle
• Name: Amort
• Manufacturer: SAA
• Lisainfo: 318 202
• Additional information: 318 202

Suspension: for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: KAYABA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with increased ground clearance, for vehicles without electronic suspension control

• not for vehicle type: Scout
• for PR number: 0N4, G03, G04, G05, G06, G07
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Length 2 [mm]: 548
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Lisainfo: 22-232342
• Additional information: 22-232342

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control, for vehicles with bad road version

• Fitting Position: Front Axle
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.29
• Article number of recommended accessories: MK411, PK422
• Packaging length [cm]: 56.8
• Packaging width [cm]: 17.2
• Packaging height [cm]: 17.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: ST36/25X167A
• Shock Absorber Mounting Type: Top pin
• Housing Diameter [mm]: 55
• Name: Amort
• Manufacturer: SAA

Suspension: for vehicles with increased ground clearance, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with electronic suspension control
• Length 1 [mm]: 372
• Length 2 [mm]: 550
• Suspension Strut Outer Diameter [mm]: 55
• Name: Amort
• Manufacturer: MAX

• not for vehicle type: Scout
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top pin
• Length [mm]: 677
• Axle: Multi-link Axle
• Vehicle Equipment: for vehicles without level control
• for PR number: 0N4
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Suspension: for vehicles with electronic suspension control
• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Article number of recommended accessories: GH-369964, GH-399961, GH-693610
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Suspension Strut Outer Diameter [mm]: 55
• Weight [kg]: 5.568
• Operating Mode: Electronic
• Manufacturer: AUTO-GH
• Name: GH 359967

Shock Absorber System: Twin-Tube, Electronically adjustable shock strength

• Fitting Position: Front Axle
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 5.568
• Operating Mode: Electronic
• Guarantee: 5 years guarantee
• Packaging length [cm]: 59.1
• Packaging width [cm]: 20.7
• Packaging height [cm]: 21.2
• Name: Amort
• Manufacturer: MON

• Fitting Position: Rear Axle
• Suspension: for vehicles with electronic suspension control
• for combined PR number: 1JP
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Damper without Rebound Spring
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 4.2
• Operating Mode: Electronic
• Guarantee: 5 years guarantee
• Packaging length [cm]: 69.6
• Packaging width [cm]: 13.3
• Packaging height [cm]: 13.6
• Name: Amort
• Manufacturer: MON

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• for PR number: G02, G06, G25, G28, G29, G32
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Name: BI 35-229919
• Manufacturer: BILSTEIN

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• not for vehicle type: Scout
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Length 2 [mm]: 548
• for PR number: G02, G06, G25, G28, G29, G32
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Suspension: for vehicles with electronic suspension control
• Name: Amort
• Manufacturer: MAX

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with electronic suspension control
• Length 1 [mm]: 372
• Length 2 [mm]: 550
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Multi-link Axle
• Suspension: for vehicles with electronic suspension control
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with electronic suspension control
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Axle: Multi-link Axle
• Suspension: for vehicles with electronic suspension control
• Shock Absorber System: Twin-Tube
• Name: BI 20-267537
• Manufacturer: BILSTEIN