Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Block Separation:
Suspension: for vehicles with electronic suspension control, for vehicles with sports suspension
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: spring support; down
- Manufacturer: BORSEHUNG
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Upper,
both sides - Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Screw length below head [mm]: 82
- Overall Length [mm]: 94
- Bolt Head-/Nut Design: Male Hex
- Surface: Zink flake coated
- Strength class: 10.9
- Axle: Independent wheel suspension
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.127
- Packaging length [cm]: 10.1
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.6
- Manufacturer: FEBEST
for PR number: 1JA, 1JC, 1JP, 1X0, 2H0, 2H4, 2H5, 8Q1, 8Q5, UC7, UC9
-
for PR number: 1X0,
2H0, 2H4, 2H5 - Weight [kg]: 0.23
- Packaging length [cm]: 12.8
- Packaging width [cm]: 3.5
- Packaging height [cm]: 3.5
- Manufacturer: FEBEST
-
Lisainfo: 2398-
007- KIT FEBEST -
Additional information: 2398-
007- KIT FEBEST
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Lower,
both sides - Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Screw length below head [mm]: 97
- Overall Length [mm]: 109
- Bolt Head-/Nut Design: Male Hex
- Strength class: 10.9
- Surface: Zink flake coated
- Axle: Independent wheel suspension
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Required quantity: 2
- Height [mm]: 70
- Name: TG TED58322
- Manufacturer: TEDGUM
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.24
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: AD-
VW- 034 - Manufacturer: NTY
-
Name: NTY AD-
VW- 034
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: AD-
VW- 033 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 1K0412303L
- Fitting Position: Front Axle
-
Material: PU
(Polyurethane) - Weight [g]: 170
- Component Number: 2
- Name: IM 50491
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Block Separation:
- Manufacturer: JP GROUP
Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance
- Fitting Position: Front Axle
- Lisainfo: Top Strut Mounting
- Additional information: Top Strut Mounting
-
for PR number: 1X0,
2H0, 2H4, 2H5 - Weight [kg]: 0.141
- Packaging length [cm]: 10.7
- Packaging width [cm]: 3.4
- Packaging height [cm]: 3.4
- Manufacturer: FEBEST
- Width [mm]: 127
- Thickness [mm]: 40
- Inner Diameter [mm]: 78
- Outer Diameter [mm]: 127
-
Material: Plastic,
Metal - Bearing Type: Rolling Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.31
- Manufacturer: FEBI
- Lisainfo: 44799 FEBI
- Additional information: 44799 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Front Axle both sides - Suspension: for vehicles with standard suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
- for OE number: 5Q0511357Q
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [g]: 227
- Component Number: 2
- Name: IM 50341
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Suspension: for vehicles with electronic suspension control
- Quantity per axle: 2
- Manufacturer: SKF
- Name: SK VKD35052
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Manufacturer: JP GROUP
- Quantity: 2
- Fitting Position: Front Axle
- General Information: repair kit for shock absorber; front
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without bearing
-
Material: Rubber/
Metal - Required quantity: 2
- Name: TG TED22900
- Manufacturer: TEDGUM
- Inner Diameter [mm]: 14
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- for OE number: 1K0412303B
- Manufacturer: KAMOKA AMORTYZATORY
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount - Alternative Repair Kit: 118 038
- Quantity per axle: 2
- Consult accessories list for recommended additional repairs:
- Supplementary Article/Info 2: without rolling bearing
- Replace in pairs only:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles with electronic suspension control
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.392
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 14
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: SWAG
- Name: SW 30 94 0171
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Alternative Repair Kit: 803 024
- Manufacturer: SACHS
for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Name: COC 49495777
- Manufacturer: CORTECO
- Fitting Position: Front Axle
- for OE number: 1K0412303AA
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- Inner Diameter [mm]: 14
- Supplementary Article/Info 2: without ball bearing
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity: 2
- Fitting Position: Front Axle
- General Information: repair kit for shock absorber; front
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Weight [kg]: 0.33
- Packaging length [cm]: 12.7
- Packaging width [cm]: 12.7
- Packaging height [cm]: 3.8
- Manufacturer: FEBEST
-
Quantity: 1,
2 - Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Aluminium
- Weight [g]: 431
- Thickness [mm]: 60
- Inner Diameter [mm]: 10
- Name: IM 37975
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [g]: 812
- Supplementary Article/Info 2: without bearing
- Component Number: 2
- Name: IM 37649
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
-
for OE number: 5Q0 412 249 E,
5Q0 412 249 F - Name: LMI 3755501
- Manufacturer: LEMFÃRDER
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- for PR number: 1JD
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Observe dimensions:
- Support plate diameter [mm]: 10.2
- Quantity per axle: 2
- Housing diameter pressure stop [mm]: 60.5
- Manufacturer: LEMFORDER
for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer!
- Quantity: 2
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
-
Fitting Position: Right,
Left, Rear Axle - Manufacturer: SNR
- Name: SN KB954.08
- Quantity: 2
- Supplementary Article/Info 2: without ball bearing
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- Required quantity: 2
- Inner Diameter [mm]: 14
- General Information: suspension strut storage; front
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- Suspension: for vehicles with electronic suspension control
- Quantity per axle: 1
- General Information: Twin Pack for axle repair
- Manufacturer: SKF
- Name: SK VKD35052T
- Fitting Position: Front Axle both sides
- Supplementary Article/Info 2: with rolling bearing
- Quantity per axle: 2
- Replace in pairs only:
- for components see parts list:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Right,
Left, Front Axle -
Article number of the recommended special tool: Clas :
OM1112, Clas : OP3231 - Manufacturer: SNR
- Name: SN KB657.27
-
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 14
- Supplementary Article/Info 2: with ball bearing
- Weight [kg]: 1.066
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.1
- Supplementary Article/Info 2: with ball bearing
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 2
- Quantity Unit: Kit
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: BORSEHUNG
- Fitting Position: Rear Axle
- Quantity: 2
- Quantity Unit: Kit
- General Information: repair kit for shock absorber; rear
- Manufacturer: BORSEHUNG
- Quantity: 2
- Quantity Unit: Kit
- Fitting Position: Front Axle
- General Information: repair kit for shock absorber; front
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle Left,
Front Axle Right -
Material: Rubber/
Metal - Supplementary Article/Info 2: with rolling bearing
- Number of Parts [parts]: 2
- Manufacturer: METZGER