• Fitting Position: Front Axle Left, Front Axle Right, Rear
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Control Arm-/Trailing Arm Bush
• Additional information: Control Arm-/Trailing Arm Bush

• Fabrication Number: ZTP-VW-001A
• Manufacturer: NTY

Fitting Position: Front Axle, inner, in front of axle, Left, Right, Lower

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Thickness [mm]: 45
• Material: Rubber/Metal
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: ZTT-VW-006A
• Manufacturer: NTY

Fitting Position: Rear Axle, Upper, inner, Rear Axle Left, Rear Axle Right

• Fitting Position: Front Axle, Front
• Total Length [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48
• Name: COC 80005079
• Manufacturer: CORTECO

• Outer Diameter [mm]: 60
• for PR number: 2H0, 2H5
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left, Front Axle Right, Front, Lower
• Thickness [mm]: 54
• Outer Diameter 1 [mm]: 28
• Outer Diameter 2 [mm]: 40
• Inner Diameter 1 [mm]: 12
• Manufacturer: BGA

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 237
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Overall Length [mm]: 54
• Name: IM 1620
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 53
• Manufacturer: DELPHI
• Name: DE TD521W

• Control/Trailing Arm Type: for control arm
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 5Q0407182A
• Manufacturer: SASIC
• Additional information: 9001759
• Lisainfo: 9001759

• Fitting Position: Rear Axle, both sides, Upper, inner
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Name: TG 00720919
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle, Centre
• for OE number: 1K0 505 541 B
• Manufacturer: GSP

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.183
• Observe service information:
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle
• Axle alignment required after fitting:
• Weight [kg]: 0.182
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Axle alignment required after fitting:
• Fitting Position: Rear Axle Upper, inner
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.05
• Outer Diameter [mm]: 38.05
• Control/Trailing Arm Type: for control arm
• for OE number: 1K0 505 279 A
• Weight [kg]: 0.081
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1K0 505 203 A
• Axle alignment required after fitting:
• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14
• Weight [kg]: 0.08
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Lower, outer
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Height [mm]: 50
• Name: ALT 94739AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 48, 28
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Front, Front Axle Right
• Weight [kg]: 0.187
• Observe service information:
• Manufacturer: SWAG
• Name: SW 30 92 4390

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, both sides, Upper, outer
• Required quantity: 2
• Manufacturer: TEDGUM

• Fitting Position: Front Axle Left, Front Axle Right, Front, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 39
• Inner Diameter [mm]: 12
• Width [mm]: 32
• Quantity per axle: 2
• for OE number: 5Q0 407 182
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Braking/Drive Dynamics: for vehicles without Adaptive Drive
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.18
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, Rear Axle
• Required quantity: 2
• Weight [g]: 115
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Length [mm]: 50
• Name: IM 1724
• Manufacturer: ORIGINAL IMPERIUM

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"

• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.125
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 2H0, 2H5
• Fitting Position: Rear Axle, both sides
• Control/Trailing Arm Type: for trailing arm
• Quantity per axle: 2
• Article number of recommended accessories: 38906 01, 43359 01, 44089 01
• Observe service information:
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• for OE number: 5Q0505541A
• Manufacturer: SASIC

• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, inner, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.071
• Manufacturer: FEBI BILSTEIN

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower Front Axle, Front
• Weight [kg]: 0.205
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Packaging length [cm]: 5.4
• Packaging width [cm]: 4.8
• Packaging height [cm]: 4.8
• Manufacturer: FEBEST

• Braking/Drive Dynamics: for vehicles without Adaptive Drive
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.18
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 38.3, 24
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, outer, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Manufacturer: SWAG
• Name: SW 30 92 9682

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• for OE number: 5Q0407183K
• Manufacturer: SASIC

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 60
• Height [mm]: 64
• Name: ALT 91581AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: outer, Rear Axle Lower
• Weight [kg]: 0.185
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.8
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: inner, Rear Axle Lower, in front of axle
• Weight [kg]: 0.121
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.9
• Manufacturer: FEBEST

• Weight [kg]: 0.18
• Fitting Position: Rear Axle both sides, Lower, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Diameter 1 [mm]: 12.1
• Diameter 2 [mm]: 60.3
• Length [mm]: 63.8
• Manufacturer: RTS

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, both sides, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle both sides, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12.2
• Length [mm]: 60
• Weight [kg]: 0.087
• Manufacturer: RTS

• Length [mm]: 49
• Width [mm]: 37
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Fitting Position: Rear Axle Left, outer, Lower, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.13
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Vehicle Equipment: for vehicles without drive-select
• for PR number: 2H0, 2H5
• Manufacturer: LEMFÖRDER

Fitting Position: Rear Axle Left, Rear Axle Right, Front, Lower, outer SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Lower, Rear
• Weight [kg]: 0.167
• Packaging length [cm]: 5
• Packaging width [cm]: 3.7
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 45
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 24, 38
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)"

• Fitting Position: Lower Front Axle, behind the axle
• Weight [kg]: 0.301
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Fitting Position: Upper, Rear Axle Left, Rear Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 24, 38
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A3/VW GOLF/OCTAVIA
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, outer, Lower
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 37.4
• Width 1 [mm]: 50
• Width 2 [mm]: 28
• SVHC: No SVHC present!
• Name: LU 829064010
• Manufacturer: FAG

• Braking/Drive Dynamics: for vehicles without Adaptive Drive
• Thickness [mm]: 64
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, Rear Axle Right
• Weight [kg]: 0.26
• Supplementary Article/Supplementary Info: with attachment material
• Name: SW 33 10 2842
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Lower, Front
• Suspension: for vehicles with standard suspension
• Vehicle Equipment: for vehicles without drive-select
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 60.2
• Width 1 [mm]: 45
• Width 2 [mm]: 64
• SVHC: No SVHC present!
• Manufacturer: FAG

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Thickness [mm]: 60
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 44.5
• Material: Rubber/Metal
• Weight [kg]: 0.115
• Manufacturer: FEBI

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, Lower Front Axle
• Weight [kg]: 0.22
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 4.9
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.11
• Name: DY 37-27718
• Manufacturer: DYS

• for PR number: 1X1
• Weight [kg]: 0.091
• Quantity: 10
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 1.2
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Upper, Front
• Weight [kg]: 0.23
• Packaging length [cm]: 6.4
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65
• Height [mm]: 50
• Name: ALT 88894AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, Lower, in front of axle
• for PR number: 2H0, 2H5
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 64
• Inner Diameter 2 [mm]: 12
• Outer Diameter 2 [mm]: 60
• Thickness 2 [mm]: 45
• Manufacturer: DELPHI

• Fitting Position: Front Axle, inner, behind the axle, Lower
• Inner Diameter 1 [mm]: 13
• Outer Diameter 1 [mm]: 65
• Thickness 1 [mm]: 28
• Inner Diameter 2 [mm]: 13
• Outer Diameter 2 [mm]: 65
• Thickness 2 [mm]: 50
• Name: DE TD1784W
• Manufacturer: DELPHI

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65, 30
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.302
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 50
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 65, 30
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.31
• Observe service information:
• Manufacturer: SWAG
• Name: SW 30 93 8403

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 45
• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Fitting Position: outer, Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Shape: slotted
• Weight [kg]: 0.07
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Upper, behind the axle, inner
• Weight [kg]: 0.207
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Width [mm]: 45
• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Fitting Position: outer, Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Shape: slotted
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 60
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right, inner
• Mounting Type: Rubber-Metal Mount
• Shape: slotted
• Weight [kg]: 0.09
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 60
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right, inner
• Mounting Type: Rubber-Metal Mount
• Shape: slotted
• Weight [kg]: 0.09
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.51
• Name: DY 37-26231
• Manufacturer: DYS

• Fitting Position: Rear Axle, both sides, Upper, inner
• Control/Trailing Arm Type: for control arm
• Required quantity: 2
• Material: PU (Polyurethane)
• Name: TG TED89665
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle, both sides, Upper, outer
• Required quantity: 2
• Material: PU (Polyurethane)
• Name: TG TED81265
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle, both sides, Front
• Control/Trailing Arm Type: for trailing arm
• Required quantity: 2
• Material: PU (Polyurethane)
• Name: TG TED37720
• Manufacturer: TEDGUM