• Installatsiooni pool: esisild vasakul, esisild paremal
• Välisläbimõõt [mm]: 74
• Siseläbimõõt [mm]: 40
• Laius (mm): 40
• Lisainfo: Wheel bearing, front
• Additional information: Wheel bearing, front

• Construction Year to: 04.1999
• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Kõrgus (mm): 39,9
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Construction Year to: 04.1999
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga
• Veljeaukude hulk: 5
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• Installatsiooni pool: Tagasild
• Hammastehulk ABS-rõngas: 43
• Siseläbimõõt [mm]: 61
• Välisläbimõõt [mm]: 79,5
• Piirangutega toode/piirangu info 2: rattalaagri/keskme jaoks
• Laius (mm): 21
• Kaal (kg): 0,039
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: for wheel bearing/wheel hub
• Fitting Position: Rear Axle both sides
• Manufacturer: METZGER

• Installatsiooni pool: Tagasild, Esisild
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle both sides
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: Esisild
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Installatsiooni pool: esisild mõlemapoolselt
• Hulk telje kohta: 2
• Siseläbimõõt [mm]: 40
• Laius (mm): 40
• Välisläbimõõt [mm]: 74
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild
• Garantii: 4 aastat garantii
• Kaal (kg): 1
• Aukude arv: 4
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Välisläbimõõt [mm]: 74
• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• Installatsiooni pool: Esisild, esisild vasakul, esisild paremal
• Seerianumber: KLP-VW-009
• Manufacturer: NTY
• Name: NTY KLP-VW-009

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle both sides, Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Manufacturer: JPN

• alternatiivne remondikomplekt: 100 498 0048
• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Kõrgus (mm): 39,9
• Laagriteostus: Kuullaager
• Name: RATTALAAGER
• Manufacturer: MEY
• Lisainfo: 1004070048
• Additional information: 1004070048

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Quality class: PJ
• Name: Wheel bearing kit

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• Välisläbimõõt [mm]: 74
• Siseläbimõõt [mm]: 40
• Laius (mm): 40
• Piirangutega toode/piirangu info 2: koos mutriga, koos turvarõngaga
• Täiskomplekt:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Versioon: Two
• Laius 1 (mm): 40
• Välisläbimõõt 1 [mm]: 74
• Siseläbimõõt 1 [mm]: 40
• Manufacturer: GSP

• Fitting Position: Front Axle
• Laius (mm): 40
• Siseläbimõõt [mm]: 39,6
• Välisläbimõõt [mm]: 74
• Netokaal [kg]: 0,77
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK
• Lisainfo: .
• Additional information: .

• Seerianumber: KLP-MZ-012
• Veljesuurus (toll): 18,0
• Manufacturer: NTY

Installatsiooni pool: Tagasild, esisild vasakul, esisild paremal, Esisild

• Fitting Position: Front Axle
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt 1 [mm]: 74
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Front Axle Left, Front Axle Right
• Versioon: One
• Laius 1 (mm): 40
• Välisläbimõõt 1 [mm]: 74
• Siseläbimõõt 1 [mm]: 40
• Manufacturer: GSP

• Installatsiooni pool: Esisild
• OE-numbri jaoks: 1J0 498 625
• Laius (mm): 40
• Välisläbimõõt [mm]: 74
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Laagriteostus: kuullaager
• Kaal (kg): 0,768
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Piirangutega toode/piirangu info: teljemutriga
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRONT LR+FR
• for OE number: 1J0498625A
• Läbimõõt [mm]: 74
• Siseläbimõõt [mm]: 40
• Laius 1 (mm): 0
• Kinnitusaukude hulk: 1
• Manufacturer: DAYCO ZESTAWY LOZYSK KOL

• Fitting Position: Front Axle
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Laagriteostus: kuullaager
• Kaal (kg): 0,768
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Piirangutega toode/piirangu info: teljemutriga
• Name: SW 30 91 4250
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Construction Year to: 04.1999
• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Kõrgus (mm): 39,9
• Laagriteostus: Kuullaager
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Piirangutega toode/piirangu info 2: koos rattakeskmega
• Installatsiooni pool: Tagasild, Tagasild vasakul, Tagasild paremal
• Seerianumber: KLT-VW-004

• Fitting Position: Front Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Laius (mm): 40
• SVHC: SVHS aineid ei esine
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Installatsiooni pool: Esisild, Tagasild
• Garantii: 4 aastat garantii
• Kaal (kg): 1,52
• Ava Ø 1 (mm): 100
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV439

• Construction Year to: 04.1999
• Fitting Position: Front Axle
• Required quantity: 2
• Kaal (kg): 0,79
• pakendi pikkus [cm]: 11
• pakendi laius [cm]: 9
• pakendi kõrgus [cm]: 9
• Välisläbimõõt [mm]: 74
• Siseläbimõõt [mm]: 40
• Laius (mm): 40
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Installatsiooni pool: Tagasild
• Välisläbimõõt [mm]: 120
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle both sides
• Rotation angle [°]: 60
• Diameter [mm]: 74
• Width [mm]: 40
• Weight [kg]: 0.71
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Tightening Torque [Nm]: 200, 60
• Weight [g]: 820
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Outer Diameter [mm]: 74
• Inner Diameter [mm]: 40
• Width [mm]: 40
• Manufacturer: METZGER

• Installatsiooni pool: Tagasild
• Manufacturer: DELLO AUTOMEGA

• Quantity: 2
• Fitting Position: Front
• General Information: wheel bearing with assembly parts; front
• Manufacturer: VIKA

• Supplementary Article/Info 2: with nut
• Outer Diameter [mm]: 74
• Inner Diameter [mm]: 40
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Width [mm]: 61.5
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Manufacturer: JPN

• Construction Year from: 06.1998
• Installatsiooni pool: Tagasild
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Garantii: 4 aastat garantii
• Kaal (kg): 1,75
• Aukude arv: 5
• Ava Ø 1 (mm): 100
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV001

• Fitting Position: Rear Axle Left, Rear Axle Right
• Versioon: One
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 43
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Siseläbimõõt 2 (mm): 29,98
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Laius (mm): 61,8
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Hammastehulk ABS-rõngas: 43
• Netokaal [kg]: 1,72
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Installatsiooni pool: Tagasild
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Välisläbimõõt [mm]: 120
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Right, Left, Front Axle
• Pöördenurk [°]: 60
• Väändejõud [Nm]: 60, 200
• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: SNR
• Name: SN R157.22

• Fitting Position: Rear Axle Left, Rear Axle Right
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 43
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Siseläbimõõt 2 (mm): 29,98
• Manufacturer: GSP

• OE-numbri jaoks: 1J0 501 477 A
• Installatsiooni pool: Tagasild mõlemapoolselt
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Fitting Position: Front Axle
• Required quantity: 2
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Laius (mm): 63,5
• Hammastehulk ABS-rõngas: 43
• Siseläbimõõt [mm]: 30
• Välisläbimõõt 2 [mm]: 120
• Kinnitusaukude hulk: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Hulk telje kohta: 2
• Veljeaukude hulk: 5
• Ava Ø (mm): 100
• Manufacturer: TOPRAN

Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga, Rattalaager on integreeritud rattarummu, koos rasvakattega, koos mutriga Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: ees
• Üldine informatsioon: wheel bearing; front
• Manufacturer: BORSEHUNG

• Installatsiooni pool: Tagasild mõlemapoolselt
• Hulk telje kohta: 2
• Veljeaukude hulk: 5
• Ava Ø (mm): 100
• Manufacturer: TOPRAN

Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga, Rattalaager on integreeritud rattarummu Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 2
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga, koos rattakeskmega Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Veljeaukude hulk: 5
• Siseläbimõõt [mm]: 30
• Aukude arv: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga, koos rattakeskmega
• Installatsiooni pool: Tagasild
• Laius (mm): 61,8
• Ava Ø (mm): 100
• Välisläbimõõt [mm]: 120
• Kaal (kg): 1,639
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 2
• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 100
• Width [mm]: 63
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Bearing Type: Rolling Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Siseläbimõõt 1 [mm]: 30
• Välisläbimõõt 1 [mm]: 120
• Kõrgus 1 (mm): 64
• Veljeaukude hulk: 5
• Kaal (kg): 2,68
• Hammastehulk ABS-rõngas: 43
• Keermemõõt: M14 x 1.5
• Ava Ø (mm): 100
• Manufacturer: A.B.S.

Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga, koos ABS-andurirõngaga

• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 1,506
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: REAR LR+RE
• for OE number: 1J0598477
• Läbimõõt [mm]: 120
• Siseläbimõõt [mm]: 30
• Laius 1 (mm): 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Kinnitusaukude hulk: 1
• Name: DA KWD1013
• Manufacturer: DAYCO

• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 2
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Name: SW 32 92 4236
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga, koos rattakeskmega Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Manufacturer: DRIVE

• Construction Year to: 04.1999
• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt 1 [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Hammastehulk ABS-rõngas: 43
• Veljeaukude hulk: 5
• Hammastehulk: 43
• Laagriteostus: Kuullaager
• Name: RATTARUMM
• Manufacturer: MEY

Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga, koos ABS-andurirõngaga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Model Year from: 1997
• Installatsiooni pool: Esisild
• Kaal (kg): 0,927
• Välisläbimõõt [mm]: 74
• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• pakendi pikkus [cm]: 8,5
• pakendi laius [cm]: 7,4
• pakendi kõrgus [cm]: 7,4
• Manufacturer: FEBEST

• Installatsiooni pool: vasakul
• Üldine informatsioon: repair kit for wheel bearing
• Manufacturer: BORSEHUNG

• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 1,506
• Name: SW 99 90 9521
• Manufacturer: SWAG
• Lisainfo: 99 90 9521 SWA
• Additional information: 99 90 9521 SWA

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Piirangutega toode/piirangu info 2: koos pööreteanduriga
• Pistikkontaktide arv: 2
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Välisläbimõõt [mm]: 74
• vajaminev tükihulk: 1
• Laius (mm): 40
• Installatsiooni pool: esisild vasakul
• Siseläbimõõt [mm]: 40
• Kaal (kg): 0,881
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 120
• Supplementary Article/Info 2: with ABS sensor ring
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• Laius (mm): 61,8
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Front Axle
• Välisläbimõõt [mm]: 74
• Pistikkontaktide arv: 2
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• vajaminev tükihulk: 1
• Kaal (kg): 0,837
• Laius (mm): 40
• Installatsiooni pool: esisild paremal
• Piirangutega toode/piirangu info 2: koos pööreteanduriga
• Siseläbimõõt [mm]: 40
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild
• Ava Ø (mm): 100
• Aukude arv: 5
• Kaal (kg): 1,506
• Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu
• vajaminev tükihulk: 2
• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Laagriteostus: Rulllaager
• Üldine informatsioon: wheel hub with bearing; rear
• Manufacturer: BORSEHUNG

• Supplementary Article/Info 2: with ABS sensor ring, with wheel hub
• Outer Diameter [mm]: 120
• Inner Diameter [mm]: 30
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Right, Left, Rear Axle
• Aukude arv: 5
• Piirangutega toode/piirangu info 2: koos kummlaagriga
• Hammastehulk: 43
• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• Manufacturer: SNR
• Name: SN R157.20

• Installatsiooni pool: taga
• Piirangutega toode/piirangu info 2: koos poltidega
• Üldine informatsioon: wheelhub with bearing; rear; with screws
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt [mm]: 120
• Siseläbimõõt [mm]: 30
• Laius (mm): 61,5
• SVHC: SVHS aineid ei esine
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Construction Year to: 04.1999
• Fitting Position: Rear Axle
• Required quantity: 2
• Kaal (kg): 1,74
• pakendi pikkus [cm]: 13,7
• pakendi laius [cm]: 13,1
• pakendi kõrgus [cm]: 7,3
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Välisläbimõõt [mm]: 120
• Veljeaukude hulk: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Required quantity: 2
• Ääriku läbimõõt [mm]: 120
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Manufacturer: SKF