Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Height [mm]: 8
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 25 tk
- Additional information: PAKENDIS 25 tk
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Height [mm]: 8
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Height [mm]: 7
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Weight [kg]: 0.02
-
Thickness [mm]: 7,
6.5 - General Information: shaft oil seal; 48x62x7MM
- Manufacturer: VIKA
- Fitting Position: Centre
- Inner Diameter [mm]: 18
- Thickness [mm]: 8
- Outer Diameter [mm]: 30
- Weight [kg]: 0.011
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 5-
Speed Manual Transmission -
Fitting Position: Left,
Centre -
Thickness [mm]: 7,
6.5 - Inner Diameter [mm]: 48
- Weight [kg]: 0.02
-
Name: VOLLI RONGASTIHEND,
MANUAALK.KASTI FLANTS - Manufacturer: FEB
- Additional information: FE15263
- Lisainfo: FE15263
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 10
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 65
- General Information: shaft oil seal; 50x65x10MM
- Manufacturer: VIKA
- for OE number: 020 311 108 A
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 14
- Manufacturer: TRUCKTEC
- General Information: radial shaft seal
- Manufacturer: VIKA
-
Transmission Type: 5-
Speed Manual Transmission - Fitting Position: Front
-
Transmission ID: DLP/
CZE/ DRZ/ DRY, DUU/ DUT/ DUS/ CZB - Thickness [mm]: 10
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 65.2
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.03
-
Name: VOLLI RONGASTIHEND,
MANUAALK.KASTI FLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Outlet,
outer - Inner Diameter [mm]: 50
- Thickness [mm]: 10
- Sealing Ring Diameter [mm]: 65.5
- Shape: O Shape
-
Material: ACM
(Polyacrylate) - Outer Diameter [mm]: 65.5
- Weight [kg]: 0.024
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 14
- Height [mm]: 4
- Radial Shaft Seal Design: B
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: without dust lip
- Manufacturer: ELRING
- Model Year from: 2001
- Weight [kg]: 0.029
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
- Packaging height [cm]: 0.8
- Manufacturer: FEBEST
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Height [mm]: 7
- Radial Shaft Seal Design: AS
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: Inlet
-
Transmission Code: DLL,
DUU - Height 1 [mm]: 8
- Outer Diameter 1 [mm]: 40
- Inner Diameter 1 [mm]: 23.9
-
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Height [mm]: 6.5
- Radial Shaft Seal Design: ASW OF
-
Material: HNBR
(hydrogenated nitrile butadiene rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Additional information: 886.780 ELRING
- Lisainfo: 886.780 ELRING
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 14
- Height [mm]: 4
-
Radial Shaft Seal Design: A/
B -
Material: FPM
(fluoride rubber) - Dust Cover: without dust lip
- Manufacturer: ELRING
-
Transmission Type: 5-
Speed Manual Transmission -
Transmission ID: DLP/
CZE/ DRZ/ DRY, DUU/ DUS/ DUT/ CZB, DUW - Thickness [mm]: 8
- Inner Diameter [mm]: 23.9
- Outer Diameter [mm]: 40
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.01
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Code: DLL,
DUU - Height 1 [mm]: 6.4
- Height 2 [mm]: 8
- Outer Diameter 1 [mm]: 30
- Inner Diameter 1 [mm]: 18
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
- Quantity per packing unit: 2
- Quantity: 2
- Quantity Unit: Kit
-
General Information: shaft oil seal
(2pcs/ set) - Manufacturer: BORSEHUNG
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks