Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Transmission Code: AG4
- Filter type: Filter Insert
- Width [mm]: 158
- Height [mm]: 32
- Sealing Ring Diameter [mm]: 34
- Manufacturer: DELLO AUTOMEGA
-
Transmission Type: 4-
Speed Automatic Transmission -
Filter type: Screen Filter,
Suction Filter - Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Transmission Type: 4-
Speed Automatic Transmission - Filter type: Screen Filter
- Manufacturer: JP GROUP
-
Lisainfo: Hydraulic filter,
gearbox, 4 speed aut. -
Additional information: Hydraulic filter,
gearbox, 4 speed aut.
- Transmission Code: 01M
-
Supplementary Article/Supplementary Info: without gasket/
seal - See accessories list for additionally required parts:
-
Transmission Type: 4-
Speed Automatic Transmission - Weight [kg]: 0.382
- Filter type: Filter Insert
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 4-
Speed Automatic Transmission - Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with oil sump gasket
- Width [mm]: 157
- Height [mm]: 32
- Sealing Ring Diameter [mm]: 34
-
Transmission Code: AG4,
JF404E - Manufacturer: KAMOKA
- Filter type: Filter Insert
- General Information: gearbox oil filter
- Manufacturer: VIKA
- Transmission ID: 01M
- Filter type: Filter Insert
- Width [mm]: 158
- Height [mm]: 32
- Transmission Code: 01M
- Transmission Type: Automatic Transmission
- Gasket Design: Soft Material Gasket
-
Supplementary Article/Supplementary Info: with gasket/
seal - Quality class: PJ
- Name: Automatic transmission filter
- Filter type: Filter Insert
-
Fabrication Number: FSF-
VW- 027 - Transmission Code: 01M
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Piirangutega toode/piirangu info: koos tihendiga
- OE-numbri jaoks: 01M 325 429
- Laius (mm): 31
- Kõrgus (mm): 159
- Garantii: 3 aastat garantii
- Kaal (g): 442
- Pikkus (mm): 197
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Filter type: Screen Filter
- Manufacturer: JAPKO
- Transmission Code: AG4
- Filter type: Suction Filter
- Length [mm]: 196
- Width [mm]: 158
- Height [mm]: 34
- Inner Diameter [mm]: 25
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: DENCKERMANN FILTRY
-
Transmission Type: 4-
Speed Automatic Transmission - Filter type: Screen Filter
- Length [mm]: 195.5
- Width [mm]: 158
- Height [mm]: 36
- Weight [kg]: 0.2
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 4-
Speed Automatic Transmission -
Transmission Code: AG4,
01M - Kõrgus (mm): 32
- Pikkus (mm): 197
-
Laius (mm): 157,
2 - Manufacturer: PURFLUX
-
Transmission Type: 4-
Speed Automatic Transmission - Filter type: Screen Filter
- Supplementary Article/Info 2: with filter
-
Supplementary Article/Supplementary Info: with gasket/
seal - for components see parts list:
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Transmission Type: 4-
Speed Automatic Transmission -
Transmission Code: 01MP,
01MJ, 01ML, 01MM, 01MQ, 01MS, 01MW -
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with spacer sleeve
- Seal Material: Rubber
- Alternative Repair Kit: 8020001
- Manufacturer: METZGER
-
Transmission Type: 4-
Speed Automatic Transmission - Filter type: Screen Filter
- Length [mm]: 195.5
- Width [mm]: 158
- Height [mm]: 20
-
Seal Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.294
- Supplementary Article/Info 2: with oil sump gasket
-
Manufacturer: FEBI-
FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 4-
Speed Automatic Transmission - Filter type: Screen Filter
- Length [mm]: 196
- Width [mm]: 158
- Height [mm]: 20
-
Seal Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.294
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: BLUE PRINT FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gasket/
seal - See accessories list for additionally required parts:
- Transmission Code: 01M
- Weight [kg]: 0.341
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
- Quality class: PJ
- Name: Automatic transmission filter
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Kastitüüp: AG4
- Piirangutega toode/piirangu info: koos tihendiga
- OE-numbri jaoks: 000 277 26 95
- Garantii: 3 aastat garantii
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Filter type: Filter Insert
-
Transmission Code: 01M,
01N, AG4 -
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Transmission ID: AG4
-
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer Restriction: VW
- Transmission Code: AG4
- Number of mounting bores: 4
- Manufacturer: MEYLE
- Transmission ID: 01M
- Filter type: Filter Insert
- Length [mm]: 15.5
- Width [mm]: 158
- Height [mm]: 32.1
- Inner Diameter 2 [mm]: 34
- Transmission Code: 01M
-
Supplementary Article/Supplementary Info: with gasket/
seal - Gasket Design: Fibre Composite
- Number of Holes: 4
-
Recommended change interval [km]: 60,
000 - Packaging length [cm]: 19.7
- Packaging height [cm]: 23.3
- Net Weight [g]: 232
- Packaging width [cm]: 4.8
- Name: KN HX147KIT1
- Manufacturer: KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 195.5
- Width [mm]: 158
- Height [mm]: 35.1
- Inner Diameter 2 [mm]: 34
- Transmission Code: AG4
-
Supplementary Article/Supplementary Info: with gasket/
seal - Gasket Design: Fibre Composite
- Number of Holes: 5
-
Recommended change interval [km]: 60,
000 - Packaging length [cm]: 19.7
- Packaging height [cm]: 23.3
- Net Weight [g]: 232
- Packaging width [cm]: 4.6
- Name: KN HX147KIT
- Manufacturer: KNECHT
Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission
- Transmission Code: AG4
- Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Supplementary Article/Info 2: with oil sump gasket
- Length [mm]: 196
- Width [mm]: 158
- Height [mm]: 34
- Inner Diameter [mm]: 25
- SVHC: No SVHC present!
-
Manufacturer: MANN-
FILTER
- Material: Aluminium
-
Cooling Type: Water-
cooled - Core Length [mm]: 191
- Core Width [mm]: 88
- Core Depth [mm]: 40
-
Fabrication Number: CCL-
AU- 006
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Transmission Type: 4-
Speed Automatic Transmission - Material: Aluminium
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 211009
-
Transmission Type: 4-
Speed Automatic Transmission -
Cooling Type: Water-
cooled - Core Depth [mm]: 105
- Core Length [mm]: 192
- Core Width [mm]: 88
- Housing material: Aluminium
- Material: Aluminium
- Outlet Ø [mm]: 16
- Supplementary Article/Supplementary Info: without oil filter housing
- Supplementary Article/Info 2: without filter
- Manufacturer: NISSENS
-
Lisainfo: VOLKSWAGEN GOLF CABRIOLET
(1E7) (94- ) 1.9 TDi -
Additional information: VOLKSWAGEN GOLF CABRIOLET
(1E7) (94- ) 1.9 TDi
- Radiator type: Brazed cooling fins
-
Transmission Type: 4-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: without gasket/
seal - Packaging width [cm]: 11.5
- Packaging height [cm]: 12.5
- Packaging length [cm]: 21
- Net Weight [g]: 633
- Manufacturer: MAHLE BEHR HELLA TERMIKA
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
-
Transmission Code: 4-
Gang (01M) -
Code Letter: 095,
097, MagN93, N89, 01M, N88, MagN91, 096 - Weight [kg]: 0.102
- Manufacturer: VEMO GERMANY
Transmission Type: 4-Speed Automatic Transmission, Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks