Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
inner, Lower, Front - Quantity Unit: Piece
-
Mounting Type: Rubber-
Metal Mount - Net weight [kg]: 0.13
-
Name: Puks -
Kndmik VW P. GOLF/ PAS - Manufacturer: NK
-
Fitting Position: Front Axle,
Lower, Front - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 33
- Thickness 1 [mm]: 54
- Manufacturer: DELPHI
- Pikkus (mm): 54
-
Installatsiooni pool: esisild alla,
ees - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 33
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Fitting Position: Lower,
Lower Front Axle - for OE number: 191 407 182
- Manufacturer: GSP
-
Fitting Position: Front Axle,
both sides, Front - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount -
Name: Puks -
Kndmik VW P. GOLF/ PAS - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right, Front, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 32
- Inner Diameter [mm]: 12
- Width [mm]: 28
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front,
Front Axle Left, Front Axle Right - Thickness [mm]: 54
- Height [mm]: 54
- Outer Diameter 1 [mm]: 33
- Outer Diameter 2 [mm]: 36
- Inner Diameter 1 [mm]: 12
- Manufacturer: BGA
-
Fitting Position: Lower Front Axle,
Front - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, front -
Additional information: Rubber mount for wishbone,
front, front
-
Installatsiooni pool: all,
esisild vasakul, esisild paremal -
Materjal: Metall,
Kumm/ metall - Jämedus/Tugevus (mm): 54
- Siseläbimõõt [mm]: 12
-
Välisläbimõõt [mm]: 36,
33 - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
-
Production date to: 12/
03 -
Fitting Position: Front Axle,
Front, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- for OE number: 357407182
- Manufacturer: SASIC
- Thickness [mm]: 54
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 33,
36 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front, Front Axle Right - Weight [kg]: 0.1
-
Name: Puks -
Kndmik VW P. GOLF/ PAS - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 54
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW P. GOLF 84- / PASSAT 88- 97 - Manufacturer: MEY
-
Installatsiooni pool: Esisild,
kahepoolne -
Laagritüüp: Kummi-
metalllaager -
Seerianumber: ZTP-
VW- 007A - Manufacturer: NTY
- Quantity per packing unit: 4
- Installatsiooni pool: esisild alla
- Pikkus (mm): 54
-
Kaal (kg): 0,
105 - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 33
-
Laagritüüp: Kummi-
metalllaager - Kaal (g): 105
- Manufacturer: METALCAUCHO
- Installatsiooni pool: ees
- Üldine informatsioon: bonded rubber bush; front; small
- Manufacturer: VIKA
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Length [mm]: 54
- Inner Diameter [mm]: 12
- Quantity per axle: 2
- Manufacturer: TRW
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner
- for OE number: 191407182
-
Fitting Position: Lower,
Front, Front Axle - Required quantity: 2
- Material: Metal
- Weight [g]: 114
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Length [mm]: 54
- Name: IM 32200
- Manufacturer: ORIGINAL IMPERIUM
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
- Quantity per packing unit: 10
- Axle alignment required after fitting:
-
Fitting Position: both sides,
Front, Lower Front Axle - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.121
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 54
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 33,
36 -
Material: Rubber/
Metal, Metal -
Fitting Position: Front Axle Left,
Front, Front Axle Right - Weight [kg]: 0.11
- Name: SW 30 69 0002
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: ees
- Üldine informatsioon: bonded rubber bush; front
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle,
Front -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32.5
- Width [mm]: 55
- SVHC: No SVHC present!
- Name: Puks
- Manufacturer: FAG
-
Installatsiooni pool: Esisild,
all, ees - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 33
- Kõrgus (mm): 54
- Name: ALT 80941AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle both sides,
Front, Lower - Required quantity: 2
- paired article number: VKDS 331002
- Manufacturer: SKF
- Name: SK VKDS331002
-
Siseläbimõõt [mm]: 12,
1 -
Välisläbimõõt [mm]: 32,
4 - Pikkus (mm): 54
- paaris tootenumbrid: 270315
-
Kaal (kg): 0,
09 -
Montaažiinfo: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: in front of axle, Front Axle Left, Front Axle Right, inner, Lower
-
paired article number: 72-
1687 - Thickness [mm]: 41
- Inner Diameter [mm]: 13
-
Outer Diameter [mm]: 60,
27 -
Material: Rubber/
Metal -
Fitting Position: Front Axle,
Rear - for OE number: 1J0 407 181
- Observe service information:
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 - Manufacturer: MAX
-
Fitting Position: Front Axle,
both sides, inner, Front - Weight [kg]: 0.1
- Required quantity: 2
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
-
Fitting Position: Front Axle,
Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
- Manufacturer: DELLO AUTOMEGA
- Pikkus (mm): 41
-
Installatsiooni pool: esisild alla,
taga - Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 60
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Installatsiooni pool: esisild mõlemapoolselt,
all, ees -
Siseläbimõõt [mm]: 12,
2 - Pikkus (mm): 54
-
Kaal (kg): 0,
11 - Manufacturer: RTS
-
Fitting Position: Front Axle Left,
Front Axle Right, Rear, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Housing material: Aluminium
- Quantity per axle: 2
- Outer Diameter [mm]: 60
- Inner Diameter [mm]: 13
- Width [mm]: 24
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Installatsiooni pool: taga,
esisild alla -
Seerianumber: ZTP-
VW- 001H - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Installatsiooni pool: esisild vasakul,
esisild paremal, taga, all -
Materjal: Kumm/
metall - OE-numbri jaoks: 1J0 407 181
- Jämedus/Tugevus (mm): 41
- Siseläbimõõt [mm]: 13
-
Välisläbimõõt [mm]: 60,
27 - Manufacturer: MERTZ
-
Fitting Position: Front Axle,
Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 60
- Width [mm]: 41
- SVHC: No SVHC present!
- Name: Puks
- Manufacturer: FAG
-
Fitting Position: Front Axle Left,
Front Axle Right, Rear, inner - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
-
Fitting Position: Front Axle,
both sides, Front - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
-
Article number of recommended accessories: 44090 01,
44091 01 - Observe service information:
-
Name: Puks -
Kndmik VW P. GOLF/ PASSAT - Manufacturer: LMI
-
Engine Code: AGU,
ARZ, AUM -
Fitting Position: Rear,
Right, Left, Front Axle, Lower - Total Length [mm]: 41
- Outer Diameter [mm]: 60.2
- Inner Diameter [mm]: 13.2
- Weight [kg]: 0.1
- Manufacturer: CORTECO
- Name: COC 21652971
-
Fitting Position: Front Axle,
inner, Lower, behind the axle - Quantity Unit: Piece
-
Mounting Type: Rubber-
Metal Mount - Net weight [kg]: 0.13
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 LE/ PR TYLNA - Manufacturer: NK
-
Production date from: 01/
97 -
Production date to: 12/
03 -
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 13
- Outer Diameter [mm]: 59.5
- for OE number: 1J0407181
- Manufacturer: SASIC
-
Fitting Position: Front Axle both sides,
Lower, Rear - Required quantity: 2
- paired article number: VKDS 331001
- Manufacturer: SKF
- Name: SK VKDS331001
-
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter 1 [mm]: 13
- Outer Diameter 1 [mm]: 60
- Thickness 1 [mm]: 41
- Manufacturer: DELPHI
- Name: DE TD287W
- Thickness [mm]: 41
- Inner Diameter [mm]: 13
-
Outer Diameter [mm]: 60,
27 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Right,
Front Axle Left, Lower, Rear - Weight [kg]: 0.108
- Observe service information:
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 LE/ PR TYLNA - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 4
- Installatsiooni pool: esisild alla
-
Kaal (kg): 0,
105 -
Kõrgus 1 (mm): 23,
4 - Kõrgus 2 (mm): 41
- Siseläbimõõt [mm]: 13
-
Välisläbimõõt [mm]: 59,
8 - Roolimisliik: Õõtshoob
-
Laagritüüp: Kummi-
metalllaager - Kaal (g): 105
- Manufacturer: METALCAUCHO
- Model Year to: 2000
-
Fitting Position: Front,
Lower Front Axle - Weight [kg]: 0.189
- Packaging length [cm]: 5.5
- Packaging width [cm]: 4
- Packaging height [cm]: 4
- Manufacturer: FEBEST
-
Fitting Position: Lower,
Lower Front Axle - for OE number: 1J0 407 181
- Manufacturer: GSP
-
Installatsiooni pool: Esisild,
all, taga - Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 60
- Kõrgus (mm): 41
- Name: ALT 80942AL
- Manufacturer: ALTE AUTOMOTIVE
- Thickness [mm]: 41
- Height [mm]: 41
- Outer Diameter 1 [mm]: 27
- Outer Diameter 2 [mm]: 60
- Inner Diameter 1 [mm]: 13
- Manufacturer: BGA
Fitting Position: Rear, Front Axle Left, Front Axle Right, Lower Front Axle
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Length [mm]: 41
- Outer Diameter [mm]: 60
- Inner Diameter [mm]: 13
- Quantity per axle: 2
- Manufacturer: TRW
Fitting Position: Front Axle Left, Front Axle Right, Lower, Rear, inner SVHC: No information available, please contact the manufacturer!
- Siseläbimõõt [mm]: 13
-
Välisläbimõõt [mm]: 59,
5 - Pikkus (mm): 41
- paaris tootenumbrid: 270318
-
Kaal (kg): 0,
11 -
Montaažiinfo: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower
- Thickness [mm]: 41
- Inner Diameter [mm]: 13
-
Outer Diameter [mm]: 60,
27 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Right,
Front Axle Left, Lower, Rear - Weight [kg]: 0.104
- for OE number: 1J0 407 181
- Name: SW 32 69 0009
- Manufacturer: SWAG
- Lisainfo: 32 69 0009 SWA
- Additional information: 32 69 0009 SWA
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: for control arm
-
Fitting Position: both sides,
Rear, Lower Front Axle - Axle alignment required after fitting:
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.12
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Installatsiooni pool: esisild mõlemapoolselt,
all, taga -
Välisläbimõõt [mm]: 59,
6 - Siseläbimõõt [mm]: 13
- Pikkus (mm): 41
-
Kaal (kg): 0,
11 - Manufacturer: RTS
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 41
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 LE/ PR TYLNA - Manufacturer: MEY
- Installatsiooni pool: taga
- Üldine informatsioon: bonded rubber bush; rear
- Manufacturer: BORSEHUNG
-
Installatsiooni pool: Esisild,
väljas -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Kaal (kg): 0,
1 -
Name: DY 37-
06106- 6 - Manufacturer: DYS
-
Fitting Position: Lower,
Front Axle, both sides, Rear - Outer Diameter [mm]: 60
- Height 1 [mm]: 25
- Height 2 [mm]: 41
- Manufacturer: KAMOKA
- for OE number: 1E0199733A
-
Fitting Position: Rear,
Lower, Front Axle - Required quantity: 2
-
Material: Rubber/
Metal - Weight [g]: 125
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
- Length [mm]: 41
- Name: IM 1710
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Front Axle,
Rear Axle, Left, Right - Quality: OE Performance
- Colour: silver
- Weight [g]: 111
- Manufacturer: GATES
-
Fitting Position: Front Axle,
inner, Rear - Width [mm]: 41
- Weight [kg]: 0.13
- Required quantity: 2
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
- Model Year to: 2000
-
Fitting Position: Front,
Lower Front Axle - Weight [kg]: 0.12
- Packaging length [cm]: 5.4
- Packaging width [cm]: 3.6
- Packaging height [cm]: 3.6
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
both sides, Rear - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
-
Article number of recommended accessories: 44090 01,
44091 01 - Observe service information:
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 LE/ PR TYLNA - Manufacturer: LMI
- Vehicle configuration line / variant: REINFORCED
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Quality class: PJ
- Name: Control arm bush left=right
Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"
-
Installatsiooni pool: esisild vasakul,
esisild paremal, taga -
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
- vajaminev tükihulk: 1
- Kõrgus (mm): 41
- Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 60
- Garantii: Garantii 3 aastat või kuni 75 000 km
- Manufacturer: METZGER
-
Fitting Position: both sides,
Rear, Lower, Front Axle - Required quantity: 2
- reinforced version:
- Inner Diameter [mm]: 13
- Weight [kg]: 0.121
- Outer Diameter [mm]: 60.1
- Name: Puks
- Manufacturer: TED
- Quantity per packing unit: 4
-
Installatsiooni pool: esisild alla,
taga - Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Vehicle configuration line / variant: REINFORCED
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Quality class: PJ
- Name: Control arm bush left=right
Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Materjal: Kumm/
metall - Jämedus/Tugevus (mm): 90
- Siseläbimõõt [mm]: 11
- Välisläbimõõt [mm]: 72
- Manufacturer: MERTZ
- Model Year to: 2000
- Weight [kg]: 0.19
- Quantity: 2
- Packaging length [cm]: 9.2
- Packaging width [cm]: 2.5
- Packaging height [cm]: 2.5
- Manufacturer: FEBEST
- Model Year to: 2000
-
Fitting Position: Rear,
Lower Front Axle - Weight [kg]: 0.189
- Packaging length [cm]: 6.1
- Packaging width [cm]: 6.1
- Packaging height [cm]: 4.1
- Manufacturer: FEBEST
- Installatsiooni pool: Tagasild
-
Laagritüüp: Kummi-
metalllaager - Roolimisliik: õõtshoova jaoks
-
Kaal (kg): 0,
09 -
Name: DY 37-
22817 - Manufacturer: DYS
-
Installatsiooni pool: Esisild,
all, taga - Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 60
- Kõrgus (mm): 41
- Name: ALT 85037AL
- Manufacturer: ALTE AUTOMOTIVE
-
Installatsiooni pool: all,
esisild vasakul, esisild paremal - Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 60
- Jämedus/Tugevus (mm): 41
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Front Axle,
Lower - Suspension: for vehicles with heavy duty suspension
-
Siseläbimõõt [mm]: 13,
1 -
Välisläbimõõt [mm]: 60,
5 - Pikkus (mm): 41
- paaris tootenumbrid: 271005
-
Kaal (kg): 0,
13 -
Montaažiinfo: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Fitting Position: Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
- Manufacturer: MAGNETI MARELLI
- Installatsiooni pool: Esisild
- Üldine informatsioon: Bush kit for control arm; front
- Manufacturer: BORSEHUNG
- Installatsiooni pool: ees
- Üldine informatsioon: Bush kit for control arm; 4pcs
- Manufacturer: VIKA
-
Fitting Position: Rear,
Lower Front Axle, both sides - Colour: yellow
-
Material: PU
(Polyurethane) - Shore-A hardness value, base body: 90
- Required quantity: 2
- Inner Diameter [mm]: 13
- Weight [kg]: 0.248
- Outer Diameter [mm]: 60
- Supplementary Article/Info 2: with grease cap
-
Name: Puks -
Kndmik VW P. GOLF4/ A3 !!!POLIURETAN!!! - Manufacturer: TED
- Installatsiooni pool: Tagasild
- Kõrgus (mm): 90
-
Kaal (kg): 0,
63 - Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 69
-
Laagritüüp: Kummi-
metalllaager - Kaal (g): 630
- Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 13
- Outer Diameter 1 [mm]: 69
- Thickness 1 [mm]: 90
- Manufacturer: DELPHI ZAWIESZENIE
- Colour: red
-
Fitting Position: Front,
both sides, Lower Front Axle -
Material: PU
(Polyurethane) - Required quantity: 2
- Shore-A hardness value, base body: 80
- Supplementary Article/Info 2: with grease cap
- Outer Diameter [mm]: 32
- Inner Diameter [mm]: 12
- Weight [kg]: 0.082
- Name: TG TED94751
- Manufacturer: TEDGUM
- Installatsiooni pool: esisild vasakul
- Manufacturer: ABAKUS LORO
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Required quantity: 1
- Supplementary Article/Info 2: with grease cap
- Number of Parts [parts]: 4
-
Material: PU
(Polyurethane) - Weight [kg]: 0.66
- Fitting Position: Front Axle
- Manufacturer: TEDGUM
- Installatsiooni pool: esisild vasakul
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks