Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- General Information: End cap for rear axle hub
- Manufacturer: VIKA
- Fitting Position: Rear Axle
-
Name: KAITSEKAAS,
RATTAKESE - Manufacturer: MEY
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 61
- Outer Diameter [mm]: 79.5
-
Supplementary Article/Info 2: for wheel bearing/
wheel hub - Width [mm]: 21
- Weight [kg]: 0.039
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 44
- Outer Diameter [mm]: 126.5
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Number of Teeth: 36
- Manufacturer: GSP
Fitting Position: Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right
- Block Separation:
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Wheel Hub Diameter [mm]: 126
- Centering Diameter [mm]: 40
- Supplementary Article/Info 2: with ABS sensor ring
- Quantity per axle: 2
- Manufacturer: TOPRAN
- Lisainfo: 108 950 HP
- Additional information: 108 950 HP
Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: KLP-
VW- 009P - Manufacturer: NTY
-
Name: NTY KLP-
VW- 009P
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: Rear Axle,
Front Axle - Supplementary Article/Info 2: with ABS sensor ring
- Rim Hole Number: 5
- Quantity per axle: 2
- Centering Diameter [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
- Wheel Hub Diameter [mm]: 126
- Manufacturer: JPN
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Supplementary Article/Supplementary Info: without fastening/
mounting material - Supplementary Article/Info 2: without wheel bearing
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Rim Hole Number: 5
- Name: RATTARUMM
- Manufacturer: MAX
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Supplementary Article/Info 2: without wheel bearing
- Rim Hole Number: 5
- Manufacturer: JP GROUP
-
Lisainfo: Wheel hub for disc brake,
front, 40 mm -
Additional information: Wheel hub for disc brake,
front, 40 mm
-
Fitting Position: Front Axle,
Rear Axle, Front Axle both sides - Height [mm]: 74
- Weight [kg]: 1.5
- Drum diameter [mm]: 65
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 126.5
- Number of Holes: 5
- Wheel Hub Diameter [mm]: 57
- Supplementary Article/Info 2: with ABS sensor ring
- Number of Teeth: 36
- Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Weight [kg]: 1.5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- General Information: wheel hub; front
- Manufacturer: VIKA
-
Fitting Position: Rear Axle,
Front Axle - Quantity per axle: 2
-
Supplementary Article/Supplementary Info: without fastening/
mounting material - Height [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Rim Hole Number: 5
-
Diameter [mm]: 133,
40 - Braking/Drive Dynamics: for vehicles with ABS
- Drive Shaft: with ABS ring
- Weight [kg]: 1.683
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Rear Axle -
Supplementary Article/Supplementary Info: without fastening/
mounting material -
Supplementary Article/Info 2: with ABS sensor ring,
without wheel bearing - Outer Diameter [mm]: 126.5
- Bolt Hole Circle Ø [mm]: 100
- Number of Teeth, ABS ring: 86
- Rim Hole Number: 5
- Number of Teeth: 36
- Name: RATTARUMM
- Manufacturer: MEY
- Fitting Position: Rear Axle
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Weight [kg]: 1.506
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Required quantity: 2
- Width [mm]: 63
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bearing Type: Rolling Bearing
- General Information: wheel hub with bearing; rear
- Manufacturer: BORSEHUNG
-
Fitting Position: Rear Axle,
Front Axle - Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Weight [kg]: 1.5
- Supplementary Article/Info 2: with ABS sensor ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Front Axle - Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Weight [kg]: 1.5
- Supplementary Article/Info 2: with ABS sensor ring
- Observe service information:
- Name: SW 32 92 2512
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks