Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Plastic
- Weight [kg]: 0.015
- Required quantity: 1
- General Information: retaining spring
- Manufacturer: VIKA
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: engine sided
- Seal Diameter [mm]: 50
- Thickness [mm]: 3.15
- Shape: O Shape
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Width [mm]: 32
- Thickness [mm]: 1.98
- Material: Steel
- Weight [kg]: 0.001
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: engine sided
- Seal Diameter [mm]: 50
- Thickness [mm]: 3.15
- Shape: O Shape
- Surface: nubby
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Cylinder Head
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 56.3
- Thickness [mm]: 3.15
-
Shape: O-
Ring - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- for OE number: 1J0 122 291 B
-
Fabrication Number: CTM-
VW- 023
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Housing material: Plastic
- Number of inlets/outlets: 1
- for OE number: 1J0122291
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Upper
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Supplementary Article/Supplementary Info: with seal
-
Material: GRP
(Glass fibre Reinforced Plastic) - for OE number: 3B0 122 291B
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Supplementary Article/Supplementary Info: with seal
- Material: Plastic
- Fitting Position: Front
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Upper
- Manufacturer: JP GROUP
- Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
- Material: Plastic
-
Fabrication Number: CTM-
VW- 009
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Material: GRP
(Glass fibre Reinforced Plastic) - Supplementary Article/Supplementary Info: with seal
- Number of inlets/outlets: 2
- for OE number: 1J0 122 291
- Consult accessories list for recommended additional repairs:
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
- Supplementary Article/Supplementary Info: with seal
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
-
Material: GRP
(Glass fibre Reinforced Plastic) - Supplementary Article/Supplementary Info: with seal
- Number of inlets/outlets: 2
- for OE number: 3B0 122 291B
- Consult accessories list for recommended additional repairs:
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Radiator,
Lower -
Material: GRP
(Glass fibre Reinforced Plastic) - Supplementary Article/Supplementary Info: with seal
- Number of inlets/outlets: 2
-
Supplementary Article/Info 2: with bracket,
with breather valve - for OE number: 6Q0 122 291F
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Manufacturer: DELLO AUTOMEGA
- Weight [kg]: 0.033
- for OE number: 1J0 122 291 B
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Supplementary Info: with seal
-
Fitting Position: Front,
Longitudinal - Material: Plastic
- General Information: pipe union
- Manufacturer: VIKA
- for OE number: 1J0 122 291
- Weight [kg]: 0.05
- Fitting Position: Radiator
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.033
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 1J0 122 291 B
- Name: SW 30 93 8313
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Lower
-
Fabrication Number: CTM-
VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Weight [kg]: 0.033
- Required quantity: 1
- General Information: pipe union
- Manufacturer: VIKA
- Fitting Position: Lower
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Material: Plastic
- Fitting Position: Front
- Fitting Position: Cylinder Head
- Thickness [mm]: 5
- Width [mm]: 56
- Length [mm]: 56
-
Name: Tihend,
jahutusvededelikuflants - Manufacturer: AJU
-
Fitting Position: Radiator,
Upper - for OE number: 1J0121619
- Manufacturer: NRF
- Fitting Position: Lower
- Manufacturer: JP GROUP
- Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
- Number of flange connections: 4
- Manufacturer: BGA
- Colour: black
- Fitting Position: Lower
- Weight [kg]: 0.082
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1J0121100
- Fitting Position: Lower
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 85
- Supplementary Article/Info 2: without thermostat
- Name: IM 90361
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 038121121D
- Colour: black
- Material: Plastic
- Supplementary Article/Supplementary Info: with seal
- Weight [g]: 76
- Supplementary Article/Info 2: without thermostat
- Name: Jahutusvedeliku flants
- Manufacturer: IMP
- Colour: black
- Fitting Position: Lower
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: SWAG
- Name: SW 30 94 6154
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1J0121087C
- Material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 49
- Supplementary Article/Info 2: without thermostat
- Name: Jahutusvedeliku flants
- Manufacturer: IMP
- for OE number: 3B0122291B
- Supplementary Article/Supplementary Info: with seal
- Weight [g]: 29
- Supplementary Article/Info 2: without thermostat
- Name: IM 90582
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 6A121133D
- Material: Plastic
-
Supplementary Article/Supplementary Info: with seal,
without gasket/ seal - Weight [g]: 126
- Supplementary Article/Info 2: without thermostat
- Name: IM 90302
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Upper
- Weight [kg]: 0.051
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 142
- Height [mm]: 70
- Width [mm]: 30
- Weight [kg]: 0.079
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 59.2
- Inner Diameter [mm]: 29
- Weight [kg]: 0.025
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 3B0 122 291 B
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 59.2
- Inner Diameter [mm]: 29
- Weight [kg]: 0.025
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 3B0 122 291 B
- Name: SW 30 10 3334
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 3B0 122 291 B
- Weight [kg]: 0.036
- Cooling Hose: from waterpump to connecting pipe
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Article/Supplementary Info: with seal
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- Opening Temperature [°C]: 105
- Supplementary Article/Supplementary Info: with seal
- Housing Type: Synthetic Material Housing
- Manufacturer: JP GROUP
- Lisainfo: Water outlet for cooling system
- Additional information: Water outlet for cooling system
- Opening Temperature [°C]: 105
- Weight [kg]: 0.2
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 1
- Weight [g]: 200
- Supplementary Article/Info 2: with thermostat
- Number of sensors: 1
- Manufacturer: METALCAUCHO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks