• Manufacturer: JP GROUP
• Lisainfo: Quick coupling piece
• Additional information: Quick coupling piece

• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Model Year to: 2000
• Block Separation:
• Model Year from: 2001
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Housing material: Plastic
• Number of inlets/outlets: 1
• for OE number: 1J0122291
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Automatic Transmission
• Model Year to: 2000
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Fabrication Number: CTM-VW-013

• Forward- /Backflow: for foreflow
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Supplementary Article/Supplementary Info: with seal
• Material: Plastic
• Fitting Position: Front
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1J0 122 291 D
• Name: Jahutusvedeliku flants
• Manufacturer: MAX

• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• for OE number: 1J0 122 291
• Consult accessories list for recommended additional repairs:
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1J0121087B
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 45
• Supplementary Article/Info 2: without thermostat
• Name: IM 90305
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 1J0121087A
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 63
• Supplementary Article/Info 2: without thermostat
• Name: IM 90306
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 1J0122291D
• Manufacturer: NRF

• General Information: distributor
• Manufacturer: VIKA

• Material: GRP (Glass fibre Reinforced Plastic)
• Number of inlets/outlets: 4
• General Information: distributor
• Manufacturer: VIKA

• Fitting Position: Radiator, Lower
• Material: GRP (Glass fibre Reinforced Plastic)
• Supplementary Article/Supplementary Info: with seal
• Number of inlets/outlets: 2
• Supplementary Article/Info 2: with bracket, with breather valve
• for OE number: 6Q0 122 291F
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Plastic
• Manufacturer: DELLO AUTOMEGA

• for OE number: 1J0122291D
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 31
• Supplementary Article/Info 2: without thermostat
• Name: IM 90569
• Manufacturer: ORIGINAL IMPERIUM

• Vehicle Identification Number (VIN) to: 1U-V-034000
• Number of inlets/outlets: 3
• Material: GRP (Glass fibre Reinforced Plastic)
• for pipe diameter [mm]: 8, 20
• for OE number: 1J0 121 087D
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: GRP (Glass fibre Reinforced Plastic)
• Number of inlets/outlets: 3
• General Information: distributor
• Manufacturer: VIKA

• for OE number: 1J0 122 291
• Weight [kg]: 0.05
• Fitting Position: Radiator
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Lower
• Fabrication Number: CTM-VW-022
• Manufacturer: NTY

• for OE number: 038121121
• Manufacturer: NRF

• Fitting Position: Cylinder Head, transmission sided
• Material: Plastic
• Heating/Cooling: with thermal switch connector
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: CTM-VW-020
• Manufacturer: NTY

• Vehicle Equipment: for vehicles with air conditioning
• Number of inlets/outlets: 3
• Material: GRP (Glass fibre Reinforced Plastic)
• for pipe diameter [mm]: 8, 32
• for OE number: 1J0 121 087
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Housing material: Plastic
• Colour: black
• Number of inlets/outlets: 3
• Supplementary Article/Supplementary Info: with seal
• for OE number: 038121132C
• Manufacturer: DELLO AUTOMEGA

• for OE number: 038 121 121
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Fitting Position: Cylinder Head
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Material: Plastic
• Fitting Position: Front
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Radiator, Upper
• for OE number: 1J0121619
• Manufacturer: NRF

• Material: GRP (Glass fibre Reinforced Plastic)
• Heating/Cooling: with thermal switch connector
• Number of inlets/outlets: 4
• General Information: distributor
• Manufacturer: VIKA

• Fitting Position: Engine Block, Front, Left
• Housing Type: Synthetic Material Housing
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: METZGER

• Fitting Position: Lower
• Weight [kg]: 0.082
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 20
• Weight [kg]: 0.03
• for OE number: 1J0 122 291 D
• Name: SW 30 94 5980
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AGP
• Transmission Type: Manual Transmission
• Weight [kg]: 0.047
• for OE number: 1J0 121 087 B
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Plastic
• Fitting Position: Cylinder Head, transmission sided
• Supplementary Article/Info 2: with seal ring
• Heating/Cooling: with thermal switch connector
• Name: Jahutusvedeliku flants
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Supplementary Article/Supplementary Info: with seal

• Weight [kg]: 0.165
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: without thermostat
• Manufacturer: METALCAUCHO

• Material: Plastic
• Fitting Position: Front
• Weight [kg]: 0.05
• Name: SW 30 91 8230
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0 122 291 D
• Weight [kg]: 0.03
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• Material: Plastic
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 78
• Supplementary Article/Info 2: without thermostat
• Name: IM 90000
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower
• Manufacturer: JP GROUP
• Lisainfo: Quick coupling piece
• Additional information: Quick coupling piece

• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 20
• Weight [kg]: 0.031
• for OE number: 1J0 122 291 D
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AGP
• Transmission Type: Manual Transmission
• Weight [kg]: 0.047
• for OE number: 1J0 121 087 B
• Name: SW 33 10 3756
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: black
• Fitting Position: Lower
• Weight [kg]: 0.082
• Supplementary Article/Supplementary Info: with quick coupling
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Behind the radiator, Upper
• for OE number: 1J0121087B
• Manufacturer: NRF

• for OE number: 1J0121100
• Fitting Position: Lower
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 85
• Supplementary Article/Info 2: without thermostat
• Name: IM 90361
• Manufacturer: ORIGINAL IMPERIUM

• Colour: black
• Fitting Position: Lower
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: SWAG
• Name: SW 30 94 6154

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0121087C
• Material: Plastic
• Supplementary Article/Supplementary Info: without gasket/seal
• Weight [g]: 49
• Supplementary Article/Info 2: without thermostat
• Name: Jahutusvedeliku flants
• Manufacturer: IMP

• for OE number: 3B0122291B
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 29
• Supplementary Article/Info 2: without thermostat
• Name: IM 90582
• Manufacturer: ORIGINAL IMPERIUM

• Quantity: 1
• Material: Plastic
• Weight [kg]: 0.05
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• Fitting Position: Cylinder Head
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MAX

• Weight [kg]: 0.046
• for OE number: 1J0 121 087 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Behind the radiator, Upper
• Manufacturer: VERNET

• Weight [kg]: 0.046
• for OE number: 1J0 121 087 C
• Name: SW 30 10 7181
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Material: Plastic
• Number of connectors: 4
• Manufacturer: METZGER

• Supplementary Article/Supplementary Info: with seal
• Fitting Position: Front
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MEY

• Quantity: 1
• Weight [kg]: 0.17
• Required quantity: 1
• General Information: pipe union
• Manufacturer: VIKA

• Housing Type: Synthetic Material Housing
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: VERNET

• for OE number: 038121133
• Material: Plastic
• Supplementary Article/Supplementary Info: with seal
• Weight [g]: 163
• Supplementary Article/Info 2: without thermostat
• Name: Jahutusvedeliku flants
• Manufacturer: IMP

• Fitting Position: Upper
• Weight [kg]: 0.051
• Supplementary Article/Supplementary Info: with quick coupling
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Material: Plastic
• Opening Temperature [°F]: 82
• Manufacturer: 3RG

• Fitting Position: transmission sided
• for OE number: 038121132C
• Manufacturer: NRF

• Weight [kg]: 0.17
• Supplementary Article/Supplementary Info: with seal
• Fitting Position: Cylinder Head
• for OE number: 038 121 132 C
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AGP
• Number of inlets/outlets: 3
• Material: PA 66 GF 30
• Manufacturer: METZGER

• Weight [kg]: 0.17
• Supplementary Article/Supplementary Info: with seal
• for OE number: 038 121 132 C
• Fitting Position: Cylinder Head
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Model Year to: 2000
• Block Separation:
• Model Year from: 2001
• Supplementary Article/Supplementary Info: without gasket/seal
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MEY

• Fitting Position: Cylinder Head, Flywheel side
• Manufacturer: VERNET

• Engine Code: AQM
• Name: EP 1.660.002
• Manufacturer: EPS

• for OE number: 3B0 122 291 B
• Weight [kg]: 0.036
• Cooling Hose: from waterpump to connecting pipe
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 038 121 132 C
• Weight [kg]: 0.156
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Supplementary Info: with seal
• Name: JAHUTUSVEDELIKU FLANTS
• Manufacturer: MEY

• Material: Plastic
• New Part:
• for OE number: 038121132C

• Material: Aluminium
• Fitting Position: transmission sided, Cylinder Head
• Heating/Cooling: with thermal switch connector
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles with electr. auxiliary heater (glow plug) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Aluminium
• Fitting Position: Cylinder Head, transmission sided
• Heating/Cooling: with thermal switch connector
• Name: Jahutusvedeliku flants
• Manufacturer: MAX

Vehicle Equipment: for vehicles with electr. auxiliary heater (glow plug)

• Diameter 1 [mm]: 32
• Diameter 2 [mm]: 16
• Diameter 3 [mm]: 32
• Diameter 4 [mm]: 8
• Lisainfo: 93131 NIS
• Additional information: 93131 NIS