• Engine Code: DBGC, DFGA
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission ID: RLD/RPN/TFR/TJL, TNY, TFR
• Block Separation:
• Filter type: Filter Insert
• Length [mm]: 136
• Outer Diameter [mm]: 54
• Weight [kg]: 0.077
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUE PRINT
• Lisainfo: ADV182166 BLUEPRINT
• Additional information: ADV182166 BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with direct shift transmission
• Transmission Type: Dual-Clutch Transmission
• Filter type: Filter Insert
• Lisainfo: Hydraulic filter, gearbox, 6 speed aut.
• Additional information: Hydraulic filter, gearbox, 6 speed aut.

• Transmission Code: DQ250
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Filter type: Filter Insert
• Name: BM FR0001
• Manufacturer: BREMSI

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission

• Height [mm]: 138
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-VW-013
• Manufacturer: NTY

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission

• Filter type: Filter Insert
• Transmission Code: DQ250
• Transmission Type: 6-Speed Dual-Clutch Transmission
• Width [mm]: 58
• Height [mm]: 105
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: KAMOKA

• Height [mm]: 106
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Fabrication Number: FSF-AU-012
• Manufacturer: NTY
• Name: NTY FSF-AU-012

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission

• Filter type: Filter Insert
• Transmission Code: 02G, 0BT, DQ 380, DQ 400E, DQ 500
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Width [mm]: 58
• Height [mm]: 138
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: KAMOKA

• Transmission Code: DSG6 (DQ250)
• Filter type: Filter Insert
• Height [mm]: 105
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 55
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: DENCKERMANN FILTRY

• Construction Year from: 03.2017, 05.2017
• for model code: Kodiaq, Kodiaq Scout
• Transmission Type: for 6-speed dual-clutch transmission
• Transmission Code: DQ250 (DSG6)
• Block Separation:
• Filter type: Filter Insert
• Height [mm]: 106
• Outer Diameter [mm]: 58
• Inner Diameter [mm]: 29
• Manufacturer: PURFLUX

• Filter type: Filter Insert
• Manufacturer: ASHIKA

• Filter type: Filter Insert
• Manufacturer: JAPKO

• Transmission Type: 6-Speed Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• for OE number: 02E 398 051
• Transmission Code: DQ250/02E
• Consult accessories list for recommended additional repairs:
• Observe system fill quantity:
• Shape: Cylindrical
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Code: DSG 7G DQ500
• Transmission Type: Automatic Transmission
• Length [mm]: 136
• Weight [kg]: 0.082
• for OE number: 0BH 325 183 B
• Outer Diameter [mm]: 53
• Filter type: Filter Insert
• Manufacturer: DENCKERMANN FILTRY

• Transmission Code: DSG6 (DQ250)
• Filter type: Filter Insert
• Outer Diameter [mm]: 58
• Inner Diameter [mm]: 29
• Height [mm]: 106
• Manufacturer: HENGST FILTER

• Filter type: Filter Insert
• Transmission Type: Dual-Clutch Transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Quantity Unit: Piece
• Transmission Code: 0BT, DQ400E, DQ500
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Transmission Code: DQ250
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY
• Lisainfo: 1001360003
• Additional information: 1001360003

• Engine Code: DBGC, DFGA
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission ID: DQ381
• Block Separation:
• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• for OE number: 0GC 325 183 A
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAX

• Transmission Code: DSG6 (DQ250)
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 105
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 55
• SVHC: No SVHC present!
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAN

• Filter type: Filter Insert
• for OE number: GC 325 183
• Manufacturer: KAMOKA

• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• for OE number: 0GC 325 183 A
• Manufacturer: ASHIKA

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Filter type: Suction Filter
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Fabrication Number: FSF-VW-018
• Manufacturer: NTY

• Engine Code: DBGC, DFGA
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission ID: RLD/RPN/TFR/TJL, TNY, TFR
• Block Separation:
• Filter type: Filter Insert
• Length [mm]: 136
• Outer Diameter [mm]: 54
• Weight [kg]: 0.077
• Supplementary Article/Info 2: with seal ring
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB
• Additional information: F107826
• Lisainfo: F107826

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: DBGC, DFGA
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission ID: RLD/RPN/TFR/TJL, TNY, TFR
• Block Separation:
• Length [mm]: 136
• Weight [kg]: 0.1
• Outer Diameter [mm]: 54
• Filter type: Filter Insert
• Manufacturer: DRIVE

• Filter type: Filter Insert
• Height [mm]: 138
• Transmission Code: DQ500, DQ380, DQ400E
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: 6-Speed Manual Transmission, Dual-Clutch Transmission

• Construction Year from: 03.2017, 05.2017
• for model code: Kodiaq, Kodiaq Scout
• Transmission Type: for 7-speed dual-clutch transmission
• Transmission Code: DQ381 (DSG7), DQ500 (DSG7)
• Block Separation:
• Filter type: Filter Insert
• Height [mm]: 136
• Outer Diameter [mm]: 54
• Inner Diameter [mm]: 17
• Manufacturer: PURFLUX

• Filter type: Filter Insert
• Transmission Code: 0GC, DQ381
• Supplementary Article/Info 2: with seal ring
• Vehicle Equipment: for vehicles with direct shift transmission
• Name: BM FR2516
• Manufacturer: BREMSI

Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission

• Filter type: Filter Insert
• Fitting Position: Left
• General Information: gearbox filter element
• Manufacturer: BORSEHUNG

• Filter type: Filter Insert
• Transmission Code: 02G, DQ 500, DQ 400E, DQ 380
• Transmission Type: 7-Speed Automatic Transmission
• Diameter [mm]: 58
• Height [mm]: 138
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: DBGC, DFGA
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission ID: RLD/RPN/TFR/TJL, TNY, TFR
• Block Separation:
• Filter type: Filter Insert
• Length [mm]: 136
• Outer Diameter [mm]: 53.5
• Weight [kg]: 0.077
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 10 7826
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Dual-Clutch Transmission
• Supplementary Article/Supplementary Info: with gasket/seal
• Transmission Code: 0BH, 0DL, DQ380, 0BT, DQ400E, DQ500
• Filter type: Filter Insert
• Name: HšDRAULIKAFILTER,AUTOMAATKŽIGUKAST
• Manufacturer: MEY

• Transmission Code: DQ380, DQ400E, DQ500
• Height [mm]: 138
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: DQ381, DQ500
• Transmission ID: VEA, VEB, VEJ, VEM, URP, UZU, UZW
• Block Separation:
• Supplementary Article/Supplementary Info: with gasket/seal
• Filter type: Filter Insert
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MEY

Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Dual-Clutch Transmission

• Filter type: Filter Insert
• Transmission Code: 0GC, DQ381
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: 6-Speed Manual Transmission, Dual-Clutch Transmission

• Transmission Code: 02E, 0D9, DQ250
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Height [mm]: 106
• Outer Diameter [mm]: 58
• Filter type: Filter Insert
• Vehicle Equipment: for vehicles with direct shift transmission
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO
• Lisainfo: V10-0440 VAI
• Additional information: V10-0440 VAI

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• General Information: gearbox oil filter
• Manufacturer: VIKA

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• for OE number: 0GC 325 183A
• Observe system fill quantity:
• Shape: Cylindrical
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Code: DSG 7G DQ500
• Transmission Type: Automatic Transmission
• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 136
• Outer Diameter [mm]: 58
• Outer Diameter 1 [mm]: 54
• SVHC: No SVHC present!
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: MAN

• Transmission Code: 02E, 0D9, DQ250
• Outer Diameter [mm]: 58
• Height [mm]: 106
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Diameter [mm]: 53.8
• Height [mm]: 137
• Inner Diameter 2 [mm]: 17
• Transmission Code: DQ380, DQ400E, DQ500
• Packaging height [cm]: 14.5
• Packaging length [cm]: 7
• Packaging width [cm]: 7
• Net Weight [g]: 87
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN HX139D

Transmission Type: Automatic Transmission, 7-Speed Automatic Transmission

• Engine Code: DFGA, DTSB, DBGC
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission ID: DQ381, DQ500, UZ*, URP, UZW
• Block Separation:
• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Diameter [mm]: 54
• Height [mm]: 137
• Inner Diameter 2 [mm]: 17
• Supplementary Article/Supplementary Info: with gasket/seal
• Gasket Design: Soft Material Gasket
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: 0GC, DQ381
• Packaging height [cm]: 14.5
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Net Weight [g]: 80
• Manufacturer: MAHLE KNECHT

• Engine Code: DFGA, DTSB, DBGC
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission ID: DQ381, DQ500, UZ*, URP, UZW
• Block Separation:
• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Name: Hdraulikafilter,automaatk„igukast
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Diameter [mm]: 53.8
• Height [mm]: 137
• Inner Diameter 2 [mm]: 17
• Packaging height [cm]: 14.5
• Packaging length [cm]: 7
• Packaging width [cm]: 7
• Manufacturer: MAHLE KNECHT

Transmission Type: Automatic Transmission, 7-Speed Automatic Transmission

• Engine Code: DFGA, DTSB, DBGC
• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission ID: DQ381, DQ500, UZ*, URP, UZW
• Block Separation:
• Filter type: Filter Insert
• Height [mm]: 137
• Inner Diameter [mm]: 18
• Outer Diameter [mm]: 58
• Weight [kg]: 0.08
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 10 7342
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 7-Speed Dual-Clutch Transmission
• Transmission Code: 0GC, DQ381
• Filter type: Filter Insert
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

• Filter type: Screen Filter
• Manufacturer: ASHIKA-FILTRY

• Filter type: Screen Filter
• Manufacturer: JAPKO

• Length [mm]: 94
• Width [mm]: 192
• Material: Aluminium
• Depth [mm]: 33
• Quality class: PJ
• Name: Oil cooler

• Transmission Code: DQ380, DQ400E, DQ500
• Height [mm]: 138
• Outer Diameter [mm]: 58
• Vehicle Equipment: for vehicles with direct shift transmission
• Supplementary Article/Info 2: with seal ring
• See accessories list for additionally required parts:
• Filter type: Filter Insert
• Recommended change interval [km]: 60,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Dual-Clutch Transmission, 7-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for PR number: 0ES
• Housing material: Aluminium
• Cooling Type: Water-cooled
• Supplementary Article/Supplementary Info: without gaskets/seals
• Radiator Core Length [mm]: 186
• Radiator Core Width [mm]: 75
• Radiator core depth [mm]: 44
• Inlet Ø [mm]: 16
• Outlet Ø [mm]: 16
• Transmission Type: for 6-speed dual-clutch transmission
• Transmission Code: DQ250
• New Part:
• Used part return not required:
• Consult accessories list for recommended additional repairs:
• Observe system fill quantity:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: EAT-AU-010
• Transmission Type: 7-Speed Automatic Transmission
• Manufacturer: NTY
• Name: NTY EAT-AU-010

• Core Length [mm]: 189
• Core Width [mm]: 75
• Core Depth [mm]: 48
• Radiator type: Brazed cooling fins
• Transmission Type: 6-Speed Dual-Clutch Transmission
• Supplementary Article/Supplementary Info: without gasket/seal
• Packaging width [cm]: 11.1
• Packaging length [cm]: 20.1
• Net Weight [g]: 391
• Packaging height [cm]: 9.6
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Fabrication Number: EAT-AU-001
• Transmission Type: 6-Speed Automatic Transmission
• Manufacturer: NTY
• Name: NTY EAT-AU-001

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.25
• Manufacturer: SKV GERMANY
• Name: CE 96SKV208

• Transmission Type: 7-Speed Automatic Transmission
• Cooling Type: Water-cooled