Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year from: 03.2017
- Fitting Position: Front Axle
- Rim Hole Number: 5
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with integrated wheel bearing
- Lisainfo: Wheel Hub
- Additional information: Wheel Hub
- Fitting Position: Rear Axle
- Number of seats: 7
-
for PR number: 3KP,
3KQ - Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 136.5
- Outer Diameter 2 [mm]: 65
- Outer Diameter 1 [mm]: 85
- Width 2 [mm]: 48
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG
- Lisainfo: 713 6109 80 FAG
- Additional information: 713 6109 80 FAG
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Bearing Type: Ball Bearing
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 137
- Rim Hole Number: 5
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Bolt Length [mm]: 59
- Outer Diameter 2 [mm]: 136.9
- Number of mounting bores: 5
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 86
- Outer Diameter [mm]: 136.5
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Inner Diameter 2 [mm]: 32
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Width [mm]: 67.7
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136.5
- Manufacturer: JPN
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Inner Diameter 1 [mm]: 32
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Supplementary Article/Info 2: without wheel hub,
with integrated ABS sensor - Version: One
-
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 86
- Outer Diameter [mm]: 136.5
- Rim Hole Number: 5
- Inner Diameter 2 [mm]: 32
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Required quantity: 2
- Rim Hole Number: 5
- Manufacturer: DRIVE
- Fitting Position: Rear Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 137
- Bolt Hole Circle Ø [mm]: 112
- Number of Teeth, ABS ring: 86
- Rim Hole Number: 5
- Bearing Type: Ball Bearing
- Name: RATTARUMM
- Manufacturer: MEY
Supplementary Article/Info 2: with integrated wheel bearing, with integrated magnetic sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Rear Axle
- Number of Holes: 5
- Weight [kg]: 2.366
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
- Required quantity: 2
- Bolt Hole Circle Ø [mm]: 112
- Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Bearing Type: Angular Ball Bearing
- General Information: wheel hub with bearing; rear
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 137
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: OPT
- Additional information: 102019A
- Lisainfo: 102019A
- Construction Year from: 03.2017
- Fitting Position: Rear Axle
- Number of seats: 5
- Weight [kg]: 2.425
- Packaging length [cm]: 16
- Packaging width [cm]: 16
- Packaging height [cm]: 11
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 136.5
- Inner Diameter [mm]: 32
- Width [mm]: 67.7
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Fitting Position: Rear Axle
- Number of seats: 5
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 136.5
- Inner Diameter [mm]: 32
- Width [mm]: 67.7
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Flange Diameter [mm]: 136.9
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel hub
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Vehicle configuration line / variant: REAR LR+RE
- for OE number: 5QF598611
- Inner Diameter [mm]: 32
- Width 1 [mm]: 70
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 5
- Name: DA KWD1005
- Manufacturer: DAYCO
-
Engine Code: DBGC,
DFGA - Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Bolt Hole Circle Ø [mm]: 112
- Number of Holes: 5
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 2.366
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Observe service information:
- Manufacturer: FEBI BILSTEIN
Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 85
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
VW- 023 - Manufacturer: NTY
-
Name: NTY KLP-
VW- 023
Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Right,
Left, Rear Axle - Number of Holes: 5
- Supplementary Article/Info 2: with rubber mount
- Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 136
- Width 1 [mm]: 69
- Rotation angle [°]: 180
- Tightening Torque [Nm]: 200
- Manufacturer: SNR
- Name: SN R154.54
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter 1 [mm]: 85
- Outer Diameter [mm]: 136
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with integrated ABS sensor
- Weight [kg]: 2
- Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Rim Hole Number: 5
- Manufacturer: IJS GROUP
- Number of Holes: 5
- Outer Diameter [mm]: 137
- Braking/Drive Dynamics: for vehicles with ABS
-
Width [mm]: 69,
70 - Inner Diameter [mm]: 32
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Fitting Position: Rear Axle
- Weight [kg]: 2.549
- Manufacturer: VAICO
Supplementary Article/Info 2: with integrated magnetic sensor ring, with wheel bearing General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with integrated ABS sensor
- Rim Hole Number: 5
- Manufacturer: KAMOKA
- Outer Diameter [mm]: 136
- Inner Diameter [mm]: 32
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
Supplementary Article/Info 2: with integrated magnetic sensor ring, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle
- Required quantity: 2
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Flange Diameter [mm]: 136.9
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
-
Engine Code: DBGC,
DFGA - Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Bolt Hole Circle Ø [mm]: 112
- Number of Holes: 5
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 2.366
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Observe service information:
- Name: SW 32 92 3320
- Manufacturer: SWAG
Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 137
- Distance of mounting bores [mm]: 112
- Supplementary Article/Info 2: with integrated ABS sensor
- Net weight [kg]: 2.44
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK
- Fitting Position: Front Axle
- Width [mm]: 84
- Internal Toothing wheel side: 36
- Outer Diameter 2 [mm]: 136.4
- Number of mounting bores: 5
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
-
Fitting Position: Front Axle Left,
Front Axle Right -
for PR number: 3KP,
3KQ - Version: One
-
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 86
- for OE number: 5Q0407621A
- Outer Diameter [mm]: 136.5
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of Teeth: 36
- Manufacturer: GSP LOZYSKA I PIASTY KOL
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Flange Diameter [mm]: 136.4
- Outer Diameter 1 [mm]: 85
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel hub
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 32
- Always compare old and new part (in particular OE No.):
- Manufacturer Restriction: Durchmesser beachten
- Outer Diameter [mm]: 137
- Width [mm]: 69.5
- Manufacturer: METZGER
Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring
-
Fitting Position: Front Axle Left,
Front Axle Right, Front Axle - Construction Year to: 03.2022
- Block Separation:
- Outer Diameter [mm]: 136
- Braking/Drive Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 3.45
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 112
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Fitting Position: Front
- General Information: wheel hub with bearing; front
- Manufacturer: BORSEHUNG
- Lisainfo: B19118
- Additional information: B19118
- Fitting Position: Front Axle
- Required quantity: 2
- Rim Hole Number: 5
- Manufacturer: DRIVE
- Fitting Position: Front Axle
- Construction Year to: 12.2021
- Inner Diameter [mm]: 30
-
Outer Diameter [mm]: 137,
85 - Supplementary Article/Info 2: with integrated magnetic sensor ring
- Number of mounting bores: 3
- Number of Teeth on input shaft: 36
- Manufacturer: OPTIMAL
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle configuration line / variant: >0322 # >1120
- for OE number: 8S0498625A
- Inner Diameter [mm]: 29
- Width 1 [mm]: 67
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Name: DA KWD1021
- Manufacturer: DAYCO
- Fitting Position: Front Axle
- Thickness [mm]: 85
- Weight [kg]: 3.08
- Supplementary Article/Info 2: without bolts
- Required quantity: 2
- Bolt Hole Circle Ø [mm]: 112
- Width [mm]: 137
- Inner Diameter [mm]: 29
- Outer Diameter [mm]: 137
- Bearing Type: Angular Ball Bearing
- General Information: wheel hub with bearing; front; without bolts
- Manufacturer: VIKA
- Fitting Position: Front
- Supplementary Article/Info 2: with bolts
- General Information: wheelhub with bearing; front; with screws
- Manufacturer: BORSEHUNG
- Construction Year from: 03.2017
-
Fitting Position: Rear Axle,
Front Axle - Number of seats: 7
-
for PR number: 3KP,
3KQ - Block Separation:
- Weight [kg]: 3.483
- Packaging length [cm]: 15.6
- Packaging width [cm]: 15.6
- Packaging height [cm]: 9.6
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Supplementary Article/Info 2: with ABS sensor ring
- Outer Diameter [mm]: 136.5
- Outer Diameter 1 [mm]: 85
- Outer Diameter 2 [mm]: 65
- Width 2 [mm]: 48
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Fitting Position: Front Axle
- Required quantity: 2
- Flange Diameter [mm]: 136.4
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter 1 [mm]: 85
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
- Lisainfo: VKBA 7011 SKF
- Additional information: VKBA 7011 SKF
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks