• Engine Code: DFGA
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• Number of connectors: 3
• Fabrication Number: ECS-AU-005
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: JPN

• Observe technical data:
• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Engine Code: DBGC
• Number of connectors: 3
• Material: Plastic
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• General Information: pressure sensor
• Manufacturer: VIKA

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 5+
• for PR number: 7MJ
• Connector Shape: D Shape
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• General Information: pressure difference sender
• Manufacturer: BORSEHUNG

• Engine Code: DFGA
• for PR number: 7MJ
• Emission Standard: Euro 5+
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Quantity: 1
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV662
• Manufacturer: ESEN SKV

• Engine Code: DBGA
• Production date to: 31.01.2018
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 3
• Pressure [Pa] from: 48,500
• Pressure [Pa] to: 400,000
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 04L906051B
• Manufacturer: MEAT&DORIA

• for PR number: 7CP
• Vehicle Equipment: for vehicles with diesel soot filter
• Connector Shape: oval
• Number of pins: 3
• Housing Colour: black
• Number of mounting bores: 1
• Housing material: GRP (Glass fibre Reinforced Plastic), PBT
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 2
• Quality: OE EQUIVALENT
• for OE number: 03L906051B
• Manufacturer: MEAT & DORIA

• Fitting Position: Soot Particulate Filter
• Engine Code: DBGC
• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MEY

• for PR number: 7MJ
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DELPHI

• Construction Year from: 03.2017
• Exhaust System: before soot particulate filter
• Emission Standard: Euro 5+
• for PR number: 7MJ
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009409161

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 03L 906 051 B
• Width [mm]: 75
• Length [mm]: 85
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Height [mm]: 80
• Weight [g]: 100
• Housing material: Plastic
• Operating Mode: Electric
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: DBGC
• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.03
• for OE number: 03L 906 051 D
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 03.2017
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasisurve
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before exhaust turbocharger
• Component Number: G 235
• Number of pins: 2
• Mounting Type: Bolted
• Spanner Size: 17
• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• Cable Length [mm]: 550
• Overall Length [mm]: 680
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Supplementary Article/Info 2: with cable, with heat shield pipe
• Bolt Head-/Nut Design: Hexagon
• Shape: Bent
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DBGC
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Manufacturer: PIERBURG

• Construction Year from: 04.2021
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 740
• Overall Length [mm]: 850
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Name: VA 369040
• Manufacturer: VALEO

• Engine Code: DFGA
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Manufacturer: PIERBURG

for OE number: 4L 906 051 AB, 4L 906 051 F, 4L 906 051 L, 4L 906 051 M

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 590
• Overall Length [mm]: 700
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Name: VA 369044
• Manufacturer: VALEO

• Engine Code: DBGC, DFGA
• Fitting Position: before exhaust turbocharger
• Number of connectors: 2
• Weight [kg]: 0.07
• for OE number: 04L 906 088 HT
• Name: ANDUR, HEITGAASITEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Cable Length [mm]: 520
• Number of pins: 2
• Manufacturer: DELPHI

• Exhaust System: before soot particulate filter
• for PR number: 7MJ
• for OE number: 03L 906 051 B
• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: D Shape
• Weight [kg]: 0.029
• Number of pins: 3
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: DFGA
• Construction Year to: 08.2018
• Name: Andur, heitgaasisurve
• Manufacturer: BOS

• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV330

• Required quantity: 1
• Fitting Position: before exhaust turbocharger
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 25
• Cable Length [mm]: 504
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Construction Year from: 04.2021
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 850
• Overall Length [mm]: 995
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Engine Code: DBGC
• Construction Year from: 02.2017
• Construction Year to: 03.2022
• Name: Andur, heitgaasisurve
• Manufacturer: BOS

• Engine Code: DBGC, DFGA
• Block Separation:
• Operating Mode: Electric
• Voltage [V]: 5
• Conductor Number: 2
• Cable Length [mm]: 550
• Thread Size: M14 x 1,5
• Total Length [mm]: 662
• Fitting Position: before exhaust turbocharger
• Name: Andur, heitgaasitemperatuur
• Manufacturer: PIE

• Oxygen Sensor: Oxygen Sensor
• Fitting Position: Front
• General Information: lambda probe; front
• Manufacturer: VIKA

• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 505
• Number of pins: 2
• Colour: black
• Alternative Repair Kit: 0894306
• Manufacturer: METZGER

• Engine Code: DFGA, DBGC
• Construction Year to: 06.2024
• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 504
• Manufacturer: BOSCH

• Construction Year from: 03.2017
• Fitting Position: before exhaust turbocharger
• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 540
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT014495101
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Engine Code: DTSB
• for combined PR number: T6F+MC3
• Fitting Position: before pre-catalytic converter
• Manufacturer: METZGER

• Emission Standard: Euro 6+
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Engine Code: DBGC, DFGA
• for PR number: L0R, 7MM
• Block Separation:
• Cable Length [mm]: 845
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Manufacturer: DELPHI ELEKTRONIKA

Fitting Position: after soot particulate filter, before catalytic converter

• Fitting Position: before catalytic converter
• Emission Standard: Euro 6
• Engine Code: DBGC, DFGA
• for PR number: 4BF, 4IA, 7CP, 7CS
• Cable Length [mm]: 810
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Manufacturer: DELPHI ELEKTRONIKA

• Fitting Position: before catalytic converter
• Emission Standard: Euro 6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Engine Code: DBGC
• for PR number: L0L, 4BF, 4IA
• Cable Length [mm]: 925
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Manufacturer: DELPHI ELEKTRONIKA

• General Information: NOx Sensor/12V
• Manufacturer: VIKA

• Engine Code: DFGA, DBGC
• Construction Year to: 06.2024, 03.2022
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• for PR number: 7MM
• Block Separation:
• Construction Year from: 02.2017
• Manufacturer: BOSCH

• Engine Code: DFGA
• Construction Year to: 06.2024
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Fitting Position: behind exhaust turbocharger
• not for PR number: 7MM
• Manufacturer: BOSCH

• Engine Code: DFGA
• Construction Year to: 06.2024
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: behind exhaust turbocharger
• not for PR number: 7MM
• Manufacturer: BOSCH