• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Kõrgus (mm): 39,9
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga
• Veljeaukude hulk: 5
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• Installatsiooni pool: Tagasild
• Hammastehulk ABS-rõngas: 43
• Siseläbimõõt [mm]: 61
• Välisläbimõõt [mm]: 79,5
• Piirangutega toode/piirangu info 2: rattalaagri/keskme jaoks
• Laius (mm): 21
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Välisläbimõõt [mm]: 74
• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• Installatsiooni pool: Esisild, esisild vasakul, esisild paremal
• Seerianumber: KLP-VW-009
• Manufacturer: NTY
• Name: NTY KLP-VW-009

• Fitting Position: Rear Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1
• Number of Holes: 4
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle Left, Front Axle Right
• Versioon: Two
• Laius 1 (mm): 40
• Välisläbimõõt 1 [mm]: 74
• Siseläbimõõt 1 [mm]: 40
• Manufacturer: GSP

• Seerianumber: KLP-MZ-012
• Veljesuurus (toll): 18,0
• Manufacturer: NTY

Installatsiooni pool: Tagasild, esisild vasakul, esisild paremal, Esisild

• Fitting Position: Front Axle both sides, Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Manufacturer: JPN

• Fitting Position: Front Axle
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Materjal, äärik: NBR (Nitril-Butadien-Kautschuk)
• Laagriteostus: kuullaager
• Kaal (kg): 0,637
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt 1 [mm]: 74
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Front Axle Left, Front Axle Right
• Versioon: One
• Laius 1 (mm): 40
• Välisläbimõõt 1 [mm]: 74
• Siseläbimõõt 1 [mm]: 40
• Manufacturer: GSP

• Fitting Position: Front Axle
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Laagriteostus: kuullaager
• Kaal (kg): 0,768
• Piirangutega toode/piirangu info: teljemutriga
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Laagriteostus: kuullaager
• Kaal (kg): 0,768
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Piirangutega toode/piirangu info: teljemutriga
• Name: SW 30 91 4250
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Kõrgus (mm): 39,9
• Laagriteostus: Kuullaager
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Piirangutega toode/piirangu info 2: koos rattakeskmega
• Installatsiooni pool: Tagasild, Tagasild vasakul, Tagasild paremal
• Seerianumber: KLT-VW-004
• Manufacturer: NTY
• Name: NTY KLT-VW-004

• Installatsiooni pool: Tagasild
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Välisläbimõõt [mm]: 120
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Required quantity: 2
• Kaal (kg): 0,79
• pakendi pikkus [cm]: 11
• pakendi laius [cm]: 9
• pakendi kõrgus [cm]: 9
• Välisläbimõõt [mm]: 74
• Siseläbimõõt [mm]: 40
• Laius (mm): 40
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Installatsiooni pool: Tagasild
• Välisläbimõõt [mm]: 120
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Supplementary Article/Info 2: with nut
• Outer Diameter [mm]: 74
• Inner Diameter [mm]: 40
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Quantity per axle: 2
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Width [mm]: 40
• General Information: wheel bearing; front
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Flange Diameter [mm]: 120
• Supplementary Article/Info 2: with ABS sensor ring
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Pöördenurk [°]: 60
• Väändejõud [Nm]: 60, 200
• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: SNR
• Name: SN R157.22

• Fitting Position: Rear Axle Left, Rear Axle Right
• Versioon: One
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 43
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Siseläbimõõt 2 (mm): 29,98
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Laius (mm): 61,8
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Hammastehulk ABS-rõngas: 43
• Netokaal [kg]: 1,72
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Model Year from: 2001
• Installatsiooni pool: esisild mõlemapoolselt
• Kaal (kg): 0,662
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• pakendi pikkus [cm]: 7,4
• pakendi laius [cm]: 7,4
• pakendi kõrgus [cm]: 4
• Manufacturer: FEBEST

• Model Year from: 2001
• Installatsiooni pool: Esisild
• Kaal (kg): 0,927
• Välisläbimõõt [mm]: 74
• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• pakendi pikkus [cm]: 8,5
• pakendi laius [cm]: 7,4
• pakendi kõrgus [cm]: 7,4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Left, Rear Axle Right
• Keermemõõt: M14X1,5
• Hammastehulk ABS-rõngas: 43
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Siseläbimõõt 2 (mm): 29,98
• Manufacturer: GSP

• Fitting Position: Front Axle
• Required quantity: 2
• Laius (mm): 40
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 74
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Laius (mm): 63,5
• Hammastehulk ABS-rõngas: 43
• Siseläbimõõt [mm]: 30
• Välisläbimõõt 2 [mm]: 120
• Kinnitusaukude hulk: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Installatsiooni pool: ees
• Üldine informatsioon: wheel bearing; front
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 100
• Width [mm]: 63
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Bearing Type: Rolling Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 2
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 1,506
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 2
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Name: SW 32 92 4236
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: REAR LR+RE LR+RE
• for OE number: 1J0598477
• Läbimõõt [mm]: 120
• Siseläbimõõt [mm]: 30
• Laius 1 (mm): 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Kinnitusaukude hulk: 1
• Manufacturer: DAYCO ZESTAWY LOZYSK KOL

• Fitting Position: Rear Axle
• Required quantity: 2
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: DRIVE

• Veljeaukude hulk: 5
• Siseläbimõõt [mm]: 30
• Aukude arv: 5
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga, koos rattakeskmega
• Installatsiooni pool: Tagasild
• Laius (mm): 61,8
• Ava Ø (mm): 100
• Välisläbimõõt [mm]: 120
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt 1 [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Hammastehulk ABS-rõngas: 43
• Veljeaukude hulk: 5
• Hammastehulk: 43
• Laagriteostus: Kuullaager
• Name: RATTARUMM
• Manufacturer: MEY

Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga, koos ABS-andurirõngaga Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Siseläbimõõt 1 [mm]: 30
• Välisläbimõõt 1 [mm]: 120
• Kõrgus 1 (mm): 64
• Veljeaukude hulk: 5
• Kaal (kg): 2,68
• Hammastehulk ABS-rõngas: 43
• Keermemõõt: M14 x 1.5
• Ava Ø (mm): 100
• Manufacturer: A.B.S.

Piirangutega toode/piirangu info 2: koos integreeritud rattalaagriga, koos ABS-andurirõngaga

• Installatsiooni pool: vasakul
• Üldine informatsioon: repair kit for wheel bearing
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 120
• Supplementary Article/Info 2: with ABS sensor ring
• Quality class: PJ
• Name: Wheel hub

• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Ava Ø (mm): 100
• Aukude arv: 5
• Laagriteostus: Rulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 1,506
• Name: SW 99 90 9521
• Manufacturer: SWAG
• Lisainfo: 99 90 9521 SWA
• Additional information: 99 90 9521 SWA

Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Laius (mm): 61,8
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Supplementary Article/Info 2: with ABS sensor ring, with wheel hub
• Outer Diameter [mm]: 120
• Inner Diameter [mm]: 30
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Aukude arv: 5
• Piirangutega toode/piirangu info 2: koos kummlaagriga
• Hammastehulk: 43
• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• Manufacturer: SNR
• Name: SN R157.20

• Fitting Position: Rear Axle
• Required quantity: 2
• Kaal (kg): 1,74
• pakendi pikkus [cm]: 13,7
• pakendi laius [cm]: 13,1
• pakendi kõrgus [cm]: 7,3
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Välisläbimõõt [mm]: 120
• Veljeaukude hulk: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Installatsiooni pool: taga
• Piirangutega toode/piirangu info 2: koos poltidega
• Üldine informatsioon: wheelhub with bearing; rear; with screws
• Manufacturer: BORSEHUNG

• Installatsiooni pool: Tagasild
• Ava Ø (mm): 100
• Aukude arv: 5
• Kaal (kg): 1,506
• Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu
• vajaminev tükihulk: 2
• Laius (mm): 63
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 120
• Laagriteostus: Rulllaager
• Üldine informatsioon: wheel hub with bearing; rear
• Manufacturer: BORSEHUNG