Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)


- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- Sensor Type: NTC Sensor
- Mounting Type: Clipped
- Component Number: G17
- Manufacturer: TOPRAN
Housing material: Plastic, GRP (Glass fibre Reinforced Plastic), Polyamid 6.6 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.



Lisainfo: ABS sensor, front, right


- Number of pins: 2
- Connector Shape: D Shape
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.





























































- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.






-
Fabrication Number: ECT-
AU- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.




- Fitting Position: Front Axle Right
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Sensor Type: Active sensor
-
paired article number: hca-
vw- 021 -
Fabrication Number: HCA-
VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Number of mounting bores: 1
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Fitted Diameter [mm]: 9
- Colour Coding: green
- Housing Colour: black
-
Connector Shape: D Shape,
oval - General Information: temperature sensor
- Manufacturer: VIKA




- Fitting Position: Front Axle Left
- Sensor Type: Active sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
-
paired article number: hca-
vw- 022 -
Fabrication Number: HCA-
VW- 021 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Weight [g]: 15
- Name: IM 5309
- Manufacturer: ORIGINAL IMPERIUM



























- Fitting Position: Front Axle Left
- Construction Year from: 12.2019
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: DE SS21506-
12B1 - Manufacturer: DELPHI



























- Fitting Position: Rear Axle Right
- Construction Year from: 08.2020
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: DE SS21511-
12B1 - Manufacturer: DELPHI


- Number of connectors: 2
- Colour: black
- Fitting Position: Front
- Weight [kg]: 0.004
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



























- Fitting Position: Front Axle Right
- Construction Year from: 12.2019
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: DE SS21507-
12B1 - Manufacturer: DELPHI


- General Information: temperature sensor
- Manufacturer: VIKA



























- Fitting Position: Rear Axle Left
- Construction Year from: 08.2020
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: DE SS21510-
12B1 - Manufacturer: DELPHI





- Surface: primed
- Sensor Type: Ultrasonic Sensor
-
Fitting Position: both sides,
Rear, inner, Front, outer, Centre -
Fabrication Number: EPDC-
AU- 016 - Manufacturer: NTY


- Fitting Position: Front Axle Left
- Supplementary Article/Info 2: without cable
- Manufacturer: DENCKERMANN FILTRY






-
Fabrication Number: ECT-
VW- 007 -
Name: NTY ECT-
VW- 007 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





- Fitting Position: Front
- Number of connectors: 2
- Manufacturer: ERA


- Fitting Position: Rear Axle Right
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: DE SS21275-
12B1 - Manufacturer: DELPHI


- Fitting Position: Rear Axle Left
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: DE SS21274-
12B1 - Manufacturer: DELPHI



Lisainfo: ABS sensor, front, left


- General Information: external temperature sensor
- Manufacturer: BORSEHUNG


-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Number of pins: 2
- Sensor Type: NTC Sensor
-
Connector Shape: rectangular,
angled -
Housing material: GRP
(Glass fibre Reinforced Plastic) - for OE number: 5Q0 907 543A
- Mounting Type: Clipped
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Number of pins: 2
- Sensor Type: NTC Sensor
- Connector Shape: D Shape
-
Supplementary Article/Info 2: with seal ring,
without cable - Socket colour: black
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.





























- Fitting Position: Front Axle Right
- Sensor Type: Active sensor
- Manufacturer: KAVO PARTS





























































-
Fitting Position: Front Axle,
Front Axle Right -
paired article number: GH-
709921V -
Manufacturer: AUTO-
GH





























































-
Fitting Position: Front Axle,
Front Axle Left -
paired article number: GH-
709921H -
Manufacturer: AUTO-
GH


- Engine Code: DGTA
-
Thread Size: M12x1,
5 - Spanner Size: 17
- Manufacturer: FACET


- Fitting Position: Front Axle Left
- Number of connectors: 2
- Manufacturer: JPN





























- Fitting Position: Front Axle Left
- Sensor Type: Active sensor
- Manufacturer: KAVO PARTS


- Fitting Position: Front Axle Left
- Construction Year from: 12.2019
- Required quantity: 1
- Overall Length [mm]: 60
- Length [mm]: 21
- Sensor Type: Active sensor
- Socket colour: black
- paired article number: 32315
- Weight [kg]: 0.07
- Manufacturer: A.B.S.


- Fitting Position: Front Axle Right
- Required quantity: 1
- Construction Year from: 12.2019
- Overall Length [mm]: 60
- Length [mm]: 21
- Sensor Type: Active sensor
- Socket colour: black
- paired article number: 32314
- Weight [kg]: 0.07
- Manufacturer: A.B.S.


- Required quantity: 1
- Fitting Position: Front Axle Left
- Supplementary Article/Info 2: without cable
- Colour: black
- Manufacturer: BREMI


- Required quantity: 1
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: without cable
- Colour: black
- Manufacturer: BREMI


- Fitting Position: Front Axle Right
- Number of connectors: 2
- Manufacturer: JPN


- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Connector Shape: D Shape
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG


- Weight [kg]: 0.1
- Number of connectors: 2
- Required quantity: 1
- Fitting Position: Front Axle Right
- General Information: ABS speed sensor; front right
- Manufacturer: VIKA


- Vehicle Equipment: for vehicles with automatic climate control
- Number of pins: 2
- Housing Colour: black
- Manufacturer: FAE


- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: without cable
- Manufacturer: DENCKERMANN FILTRY


- Engine Code: DGTA
-
Thread Size: M12x1,
5 - Spanner Size: 17
- Name: EP 1.830.378
- Manufacturer: EPS


- Production date to: 25.11.2019
- Fitting Position: Front Axle Right
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Length [mm]: 61
- Braking/Driving Dynamics: for vehicles with ABS
- paired article number: 110 609
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Production date to: 25.11.2019
- Fitting Position: Front Axle Left
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Length [mm]: 61
- Braking/Driving Dynamics: for vehicles with ABS
- paired article number: 110 608
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Construction Year to: 07.2020
- Fitting Position: Right
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU358218131
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Construction Year to: 07.2020
- Fitting Position: Left
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU358218141
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Production date to: 20.07.2020
- Fitting Position: Rear Axle Right
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Connector Shape: D Shape
- Sensor Type: Hall Sensor
- Braking/Driving Dynamics: for vehicles with ABS
- paired article number: 638 664
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Production date to: 20.07.2020
- Fitting Position: Rear Axle Left
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Connector Shape: D Shape
- Sensor Type: Hall Sensor
- Braking/Driving Dynamics: for vehicles with ABS
- paired article number: 638 663
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Fitting Position: Right Front
- General Information: ABS speed sensor; right; front
- Manufacturer: BORSEHUNG


- Number of pins: 3
- Fitting Position: Cylinder Head
-
Supplementary Article/Info 2: with seal ring,
without cable - Connector Shape: oval
-
Housing material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Engine Code: DGTA
- Colour: black
- Plug Type: Screw Contact
- Manufacturer: FACET


- Fitting Position: Front Axle Right
- Number of pins: 2
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 21
- for OE number: 6Q0927804B
- Manufacturer: AUTOFREN SEINSA
- Name: SE DS0003





- Fitting Position: Rear Axle Left
- Overall Length [mm]: 50
- Length [mm]: 24
- Sensor Type: Active sensor
- Socket colour: grey
- paired article number: 32060
- Weight [kg]: 0.02
- Manufacturer: A.B.S.




- Fitting Position: Rear Axle Right
- Overall Length [mm]: 50
- Length [mm]: 24
- Sensor Type: Active sensor
- Socket colour: grey
- paired article number: 32061
- Weight [kg]: 0.02
- Manufacturer: A.B.S.


- Engine Code: DGTA
- Colour: black
- Plug Type: Screw Contact
- Name: EP 1.830.377
- Manufacturer: EPS


- Fitting Position: Left Front
- General Information: ABS speed sensor; left; front
- Manufacturer: BORSEHUNG





- Number of connectors: 2
- Manufacturer: ERA


- Engine Code: DGTA
-
Thread Size: M12x1,
5 - Spanner Size: 16
- Manufacturer: FACET













































- Sensor Type: NTC Sensor
- Mounting Type: Screw Connection
- Connector Shape: D Shape
- Number of pins: 2
- Socket colour: black
- for OE number: 04E919501B
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF


- Quantity: 1
- Number of pins: 3
-
Name: DE SS12308-
12B1 - Manufacturer: DELPHI


-
Fitting Position: Rear,
Centre, outer, Front - Block Separation:
- for combined PR number: 7X2+K8R
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Connector Shape: rectangular
- Chemical Properties: Paintable
- for OE number: 5Q0919275B
- Manufacturer: DELLO AUTOMEGA


-
Fitting Position: Front Axle,
Rear Axle, Left, Right - Number of pins: 2
- Socket Width [mm]: 1.5
- Plug Type: Female
- Number of circuits: 2
-
Material: CuSn
(copper- tin) - Cable Length [mm]: 500
- Cable cross-section from [mm²]: 0.75
- Cable cross-section to [mm²]: 0.75
- Cable insulation material: Silicone
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Manufacturer: METZGER


- General Information: impulse sender; crackshaft
- Manufacturer: VIKA





- Voltage [V]: 12
- Shape: angled
- Sensor Type: Ultrasonic Sensor
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 28SKV015
Fitting Position: Left, Longitudinal, Right, inner, outer, Front, Rear


- Construction Year to: 11.2019
- paired article number: 23814
- Number of connectors: 2
- Fitting Position: Front Axle Right
- Weight [kg]: 0.011
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Rear
- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: MAGNETI MARELLI
- Name: MM SDP107


- Engine Code: DGTA
- Construction Year to: 11.2019
- Fitting Position: Front Axle Right
- Required quantity: 1
- Sensor Length [mm]: 21
- Manufacturer: FACET










































Manufacturer: NRF


- Construction Year to: 11.2019
- paired article number: 23816
- Number of connectors: 2
- Fitting Position: Front Axle Left
- Weight [kg]: 0.011
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Engine Code: DGTA
- Construction Year to: 11.2019
- Fitting Position: Front Axle Right
- Required quantity: 1
- Sensor Length [mm]: 21
- Name: EP 1.960.010
- Manufacturer: EPS


- Engine Code: DGTA
- Construction Year to: 11.2019
- Fitting Position: Front Axle Left
- Required quantity: 1
- Sensor Length [mm]: 21
- Manufacturer: FACET


- Engine Code: DGTA
- Construction Year to: 11.2019
- Fitting Position: Front Axle Left
- Required quantity: 1
- Sensor Length [mm]: 21
- Name: EP 1.960.011
- Manufacturer: EPS


- Construction Year to: 11.2019
-
Fitting Position: Left,
Front Axle Left - Required quantity: 1
- Voltage [V]: 12
- Total Length [mm]: 61.2
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU010039991
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Engine Code: DGTA
- Construction Year to: 07.2020
- Fitting Position: Rear Axle Left
- Required quantity: 1
- Sensor Length [mm]: 23.6
- Manufacturer: FACET


- Engine Code: DGTA
- Construction Year from: 08.2020
- Fitting Position: Rear Axle Right
- Required quantity: 1
- Sensor Length [mm]: 23.6
- Manufacturer: FACET


- Engine Code: DGTA
- Construction Year to: 07.2020
- Fitting Position: Rear Axle Left
- Required quantity: 1
- Sensor Length [mm]: 23.6
- Name: EP 1.960.221
- Manufacturer: EPS


- Engine Code: DGTA
- Construction Year from: 08.2020
- Fitting Position: Rear Axle Right
- Required quantity: 1
- Sensor Length [mm]: 23.6
- Name: EP 1.960.222
- Manufacturer: EPS


- Fitting Position: Front Axle Right
- Construction Year to: 11.2019
- Required quantity: 1
- Overall Length [mm]: 62
- Length [mm]: 21
- Sensor Type: Active sensor
- Socket colour: black
- paired article number: 30013
- Weight [kg]: 0.1
- Manufacturer: A.B.S.


- Fitting Position: Front Axle Left
- Construction Year to: 11.2019
- Required quantity: 1
- Overall Length [mm]: 62
- Length [mm]: 21
- Sensor Type: Active sensor
- Socket colour: black
- paired article number: 30014
- Weight [kg]: 0.1
- Manufacturer: A.B.S.


- Construction Year to: 11.2019
- paired article number: 32 92 3814
- Number of connectors: 2
- Fitting Position: Front Axle Right
- Weight [kg]: 0.011
- Name: SW 32 92 3816
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Front Axle Left
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
- Manufacturer: DELPHI LOCKHEED HAMULCE


- Construction Year to: 11.2019
- paired article number: 32 92 3816
- Number of connectors: 2
- Fitting Position: Front Axle Left
- Weight [kg]: 0.011
- Name: SW 32 92 3814
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.







- Number of pins: 3
-
Fabrication Number: ECS-
VW- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Fitting Position: Front Axle Right
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
- Manufacturer: DELPHI
- Quality class: PJ
- Name: ABS sensor


- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Manufacturer: FAE ELEKTRYKA


-
Fitting Position: Front,
outer - Colour Code: GRU
- Colour: black
- Surface: primed
- Number of pins: 3
- Chemical Properties: Paintable
- Sensor Type: Ultrasonic Sensor
-
Supplementary Article/Supplementary Info: with gasket/
seal - Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Construction Year to: 11.2019
-
Fitting Position: Right,
Front Axle Right - Required quantity: 1
- Voltage [V]: 12
- Total Length [mm]: 61.5
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU012039001
Brief Information: *** HELLA Electronics OE competence for over 60 years.





- Number of connectors: 3
-
Fabrication Number: ECS-
AU- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Engine Code: DGTA
- Required quantity: 1
- Manufacturer: FACET


-
Fitting Position: Right,
Front Axle -
Manufacturer: SNR /
NTN- SNR/


- Required quantity: 1
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI


- Engine Code: DGTA
- Required quantity: 1
- Name: EP 1.953.774
- Manufacturer: EPS


- General Information: Transmission speed sensor
- Manufacturer: VIKA


- General Information: hall sender camshaft
- Manufacturer: VIKA


























- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Manufacturer: VDO


-
Fitting Position: Front,
Lateral Mounting - Colour Code: GRU
- Surface: primed
- Number of pins: 3
- Chemical Properties: Paintable
- for OE number: 5Q0 919 297B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
Vehicle Equipment: for vehicles with full-autom. park assist (parallel parking) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


-
Fitting Position: Left,
Front Axle -
Manufacturer: SNR /
NTN- SNR/






























Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY



- Number of pins: 3
- Pressure from [kPA]: 50
- Manufacturer: DELPHI ELEKTRONIKA


- Engine Code: DGTA
- Required quantity: 1
- Pressure from [kPA]: 29
- Pressure to [kPA]: 400
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.48
- Manufacturer: FACET


-
Fitting Position: outer,
Rear, inner, Lateral Mounting, Front - Block Separation:
- Colour Code: GRU
- Colour: black
- Surface: primed
- Chemical Properties: Paintable
- Sensor Type: Ultrasonic Sensor
-
Supplementary Article/Supplementary Info: with gasket/
seal - Always compare old and new part (in particular OE No.):
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.





- Quantity: 1
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV662
- Manufacturer: ESEN SKV


- General Information: pressure difference sender
- Manufacturer: BORSEHUNG


- Engine Code: DGTA
- Required quantity: 1
- Pressure from [kPA]: 29
- Pressure to [kPA]: 400
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.48
- Name: EP 1.993.327
- Manufacturer: EPS





























- Construction Year to: 11.2019
- Fitting Position: Front Axle Right
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Overall Length [mm]: 61
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
- Manufacturer: BOSCH


- Fitting Position: Front Axle Right
- Construction Year to: 11.2019
- Sensor Type: Active sensor
- Supplementary Article/Supplementary Info: with accessories
- Length [mm]: 62
- paired article number: GBS2513
- Manufacturer: TRW


- Fitting Position: Front Axle Left
- Construction Year to: 11.2019
- Sensor Type: Active sensor
- Supplementary Article/Supplementary Info: with accessories
- Length [mm]: 62
- paired article number: GBS2514
- Manufacturer: TRW


- Required quantity: 1
- Mounting Type: Bolted
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of pins: 3
- Sensor Type: Impulse Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU013122221
Brief Information: *** HELLA Electronics OE competence for over 60 years.





























- Construction Year to: 11.2019
- Fitting Position: Front Axle Left
- Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Overall Length [mm]: 61
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
- Manufacturer: BOSCH


- Fitting Position: Front Axle Left
- Supplementary Article/Info 2: without cable
- MAPP code available:
- Manufacturer: ATE


- Number of pins: 3
- Connector Shape: D Shape
- Number of connectors: 1
- for OE number: 04L906051B
- Manufacturer: MEAT&DORIA



- Required quantity: 2
-
Fitting Position: Centre left,
Centre right, Front, Rear - for PR number: K8G
- Number of pins: 3
- Chemical Properties: Paintable
- Mounting Type: mounting
- Socket colour: black
- Assy./disassy. by qualified personnel required!:
- Sensor Type: Ultrasonic Sensor
- Manufacturer: HELLA ELEKTRYKA
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Quantity: 1
- Number of pins: 3
- Pressure from [kPA]: 48
-
Name: DE PS20074-
12B1 - Manufacturer: DELPHI


- Number of pins: 3
-
Pressure [Pa] from: 48,
500 -
Pressure [Pa] to: 400,
000 - Manufacturer: FAE





























- Fitting Position: Rear Axle Right
- Manufacturer: BOSCH





























- Fitting Position: Rear Axle Left
- Manufacturer: BOSCH


- Fitting Position: Exhaust Turbocharger
- Connector Shape: D Shape
- Number of pins: 3
- Sensor Type: NTC Sensor
-
Housing material: GRP
(Glass fibre Reinforced Plastic), PBT - Components deviate from OE:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Vehicle Equipment: for vehicles with diesel soot filter
- Connector Shape: oval
- Number of pins: 3
- Housing Colour: black
- Number of mounting bores: 1
-
Housing material: GRP
(Glass fibre Reinforced Plastic), PBT - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.














































- Exhaust System: before soot particulate filter
- Connector Shape: oval
- Number of pins: 3
-
Pressure [Pa] from: -
14, 000 -
Pressure [Pa] to: 100,
000 - Manufacturer: NRF


- Number of pins: 3
- Connector Shape: oval
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Thread Length [mm]: 11
- Base body material: Brass
- Measuring Range from [bar]: 0.48
- Measuring Range to [bar]: 11
- Sensor Type: Hall Sensor
- Colour Coding: brown
- Supplementary Article/Info 2: with seal ring
- Seal Material: Aluminium
- Spanner Size: 24
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Fitting Position: Oil Sump
- Number of pins: 3
- Connector Shape: D Shape
- Supplementary Article/Info 2: with seal ring
- Number of mounting bores: 3
- Housing Type: Synthetic Material Housing
- Housing material: Polyamid 6.6
- Housing Colour: black
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.









































Manufacturer: NRF




-
Fabrication Number: EGT-
VW- 083 - Number of pins: 2
- Cable Length [mm]: 620
- for OE number: 04L906088BD
- Manufacturer: NTY



-
Emission Standard: Euro 6d-
Temp - Supplementary Article/Info 2: with cable
- Cable Length [mm]: 630
- Overall Length [mm]: 745
- Number of pins: 2
- Connector Shape: oval
- Socket colour: black
-
Thread Size: M14 x 1,
5 - Spanner Size: 17
- Sensor Type: PTC
- Manufacturer: VALEO



- Exhaust System: before soot particulate filter
- Number of pins: 3
- Opening pressure [kPa]: 14
-
Name: DE DPS00022-
12B1 - Manufacturer: DELPHI


- Required quantity: 2
-
Fitting Position: both sides,
inner, Front - Vehicle Equipment: for vehicles without sports package
- for PR number: K8G
- Number of pins: 3
-
Chemical Properties: Over-
paintable - Mounting Type: Plugged
- Socket colour: black
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PX358141711
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.



- paired article number: 179140
- Number of connectors: 2
- Fitting Position: Rear Axle Left
- Weight [kg]: 0.01
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- paired article number: 179141
- Number of connectors: 2
- Fitting Position: Rear Axle Right
- Weight [kg]: 0.01
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Fitting Position: Rear Axle Left
- Construction Year to: 07.2020
- Length [mm]: 62
- Sensor Type: Active sensor
- Manufacturer: TRW

- Fitting Position: Rear Axle Right
- Construction Year to: 07.2020
- Length [mm]: 62
- Sensor Type: Active sensor
- Manufacturer: TRW


























- Fitting Position: Rear Axle Right
- Construction Year to: 07.2020
- Supplementary Article/Info 2: without cable
- MAPP code available:
- Manufacturer: ATE


























- Fitting Position: Rear Axle Left
- Construction Year to: 07.2020
- Supplementary Article/Info 2: without cable
- MAPP code available:
- Manufacturer: ATE



-
Emission Standard: Euro 6d-
Temp - Supplementary Article/Info 2: with cable
- Cable Length [mm]: 720
- Overall Length [mm]: 835
- Number of pins: 2
- Connector Shape: oval
- Socket colour: brown
-
Thread Size: M14 x 1,
5 - Spanner Size: 17
- Sensor Type: PTC
- Manufacturer: VALEO
- Name: VA 368901


- General Information: oil level sensor
- Manufacturer: VIKA














































- Required quantity: 1
- Fitting Position: after soot particulate filter
- Connector Shape: D Shape
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 30
- Cable Length [mm]: 620
- Thread Size: M14x1.5
- Supplementary Article/Supplementary Info: with synthetic grease
- Manufacturer: NRF


























-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Fitting Position: before catalytic converter
- Quantity: 1
-
Cable Length [mm]: 1,
060 -
Name: DE ES20533-
12B1 - Manufacturer: DELPHI


- Vehicle Equipment: for vehicles with automatic climate control
- Manufacturer: VALEO



- Production date from: 25.11.2019
- Fitting Position: Front Axle Left
- paired article number: 09001551
- Fitting Depth [mm]: 21.1
- Manufacturer: METZGER



- Production date from: 25.11.2019
- Fitting Position: Front Axle Right
- paired article number: 09001550
- Fitting Depth [mm]: 21.1
- Manufacturer: METZGER



- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 24
- Number of pins: 3
- Version: IAM
- Manufacturer: METZGER





- Fitting Position: before soot particulate filter
- for OE number: 04L 906 088 DH
- Cable Length [mm]: 720
- Number of pins: 2
- Supplementary Article/Info 2: with cable
- Connector Shape: D Shape
- Guarantee: 3 years guarantee
- Exhaust System: before soot particulate filter
- Socket colour: brown
- Weight [kg]: 0.09
- Shape: L Shape
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 30SKV384


- General Information: pressure sensor
- Manufacturer: VIKA




-
Fitting Position: Front,
Rear - Sensor Type: Ultrasonic Sensor
- Colour: black
- Surface: primed
- Number of pins: 3
- Shape: angled
- Chemical Properties: Paintable
- Manufacturer: AIC
Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.


- Required quantity: 1
- Mounting Type: Bolted
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PP009409591
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.

- Fitting Position: Front Axle Right
- Construction Year from: 12.2019
- Length [mm]: 62
- Sensor Type: Active sensor
- Manufacturer: TRW





- for OE number: 04L 906 088 BF
- Overall Length [mm]: 760
- Cable Length [mm]: 620
- Number of pins: 2
- Connector Shape: D Shape
- Guarantee: 3 years guarantee
- Exhaust System: after soot particulate filter
- Socket colour: beige
- Weight [kg]: 0.09
- Shape: straight
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN


- Exhaust System: before soot particulate filter
- Mounting Type: Bolted
- Number of pins: 3
- Diameter 1 [mm]: 8
- Diameter 2 [mm]: 8
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PP009403221
Brief Information: *** HELLA Electronics OE competence for over 60 years.














































- Required quantity: 1
- Fitting Position: before exhaust turbocharger
- Cable Length [mm]: 530
- Supplementary Article/Supplementary Info: with synthetic grease
- Manufacturer: NRF


- Engine Code: DGTA
-
for OE number: 4L 906 051 AB,
4L 906 051 F, 4L 906 051 L - Sensor Type: Differential Pressure Sensor
- Output Voltage, up to [V]: 5
-
Measuring Range from [kPa]: -
14 - Measuring Range to [kPa]: 100
- Number of pins: 3
- Number of mounting bores: 1
- Supplementary Article/Supplementary Info: without accessories
- Fitting Position: Soot Particulate Filter
- Manufacturer: PIERBURG





- Number of pins: 3
- for OE number: 06E907660C
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PR013680091
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Fitting Position: after soot particulate filter
-
Thread Size: M14x1,
5 - Cable Length [mm]: 696
- Socket colour: beige
- Manufacturer: FAE






























Manufacturer: BOSCH





























Manufacturer: BOSCH














































- Required quantity: 1
- Fitting Position: before soot particulate filter
- Connector Shape: D Shape
- Number of pins: 2
- Voltage [V]: 12
- Fitting Depth [mm]: 30
- Cable Length [mm]: 719
- Thread Size: M14x1.5
- Supplementary Article/Supplementary Info: with synthetic grease
- Manufacturer: NRF














































- Required quantity: 1
- Fitting Position: before catalytic converter
- Supplementary Article/Supplementary Info: with synthetic grease
- Manufacturer: NRF



- Fitting Position: before soot particulate filter
-
External Thread Size: M14 x 1,
5 - Number of connectors: 2
- Cable Length [mm]: 719
- Weight [kg]: 0.066
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Fitting Position: Oil Sump
- Number of pins: 3
- Connector Shape: D Shape
- Supplementary Article/Info 2: with seal ring
-
Seal Material: HNBR
(hydrogenated nitrile butadiene rubber) - Number of mounting bores: 3
- Housing Type: Synthetic Material Housing
-
Housing material: PA 66 GF 30,
GRP (Glass fibre Reinforced Plastic) - Housing Colour: black
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Exhaust System: before catalytic converter
- Quantity: 1
- Cable Length [mm]: 640
- Number of pins: 2
-
Name: DE TS30317-
12B1 - Manufacturer: DELPHI


- Engine Code: DGTA
- Sensor Length [mm]: 87.5
- Manufacturer: FACET








- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.23
- Always compare old and new part (in particular OE No.):
- Name: CE 07SKV230
- Manufacturer: ESEN SKV


- Fitting Position: before exhaust turbocharger
- Component Number: G 235
- Number of pins: 2
- Mounting Type: Bolted
- Socket colour: black
- Sensor Type: NTC Sensor
- Cable Length [mm]: 530
- Overall Length [mm]: 553
- Thread Size: M 14
- Thread Pitch [mm]: 1.5
- Connector Shape: D Shape
- Spanner Size: 17
-
Supplementary Article/Info 2: with heat shield pipe,
with cable - Bolt Head-/Nut Design: Hexagon
- Shape: Bent
- Manufacturer: TOPRAN
Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.





























































- Engine Code: DGTA
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


-
Oxygen Sensor: Regulating Probe,
Broadband oxygen sensor, Heated - Fitting Position: before catalytic converter
- Quantity: 1
- Cable Length [mm]: 540
- Manufacturer: DELPHI ELEKTRONIKA





- Required quantity: 2
- for PR number: K8G
-
Fitting Position: Centre left,
Centre right, Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 32
- Width [mm]: 23
- Height [mm]: 35.9
- Number of pins: 3
- Diameter [mm]: 15.5
- Manufacturer: VALEO
- Name: VA 890007



- Exhaust System: before soot particulate filter
- Quantity: 1
- Cable Length [mm]: 740
- Number of pins: 2
-
Name: DE TS30409-
12B1 - Manufacturer: DELPHI



- Fitting Position: after soot particulate filter
- Required quantity: 1
- Mounting Type: Bolted
- Number of pins: 2
- Cable Length [mm]: 645
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT358226301
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Engine Code: DGTA
-
Emission Standard: Euro 6d-
Temp - Fitting Position: before soot particulate filter
-
Thread Size: M14x1,
5 - Cable Length [mm]: 766
- Socket colour: brown
- Manufacturer: FAE



























- Exhaust System: after soot particulate filter
- Quantity: 1
- Cable Length [mm]: 620
- Number of pins: 2
- Manufacturer: DELPHI ELEKTRONIKA


- Engine Code: DGTA
- Sensor Length [mm]: 87.5
- Manufacturer: EPS



- Fitting Position: before soot particulate filter
- Required quantity: 1
- Mounting Type: Bolted
- Number of pins: 2
- Cable Length [mm]: 719
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT358226291
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.





-
Required quantity: 2,
4, 6 -
for PR number: K8G,
K8R -
Fitting Position: inner,
both sides, Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 23
- Height [mm]: 28.7
- Number of pins: 3
- Diameter [mm]: 15.5
- Name: VA 890019
- Manufacturer: VALEO
- Additional information: 890019 VALEO
- Lisainfo: 890019 VALEO






-
Fabrication Number: EPP-
VW- 004 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- General Information: Exhaust Gas Temperature Sensor
- Manufacturer: VIKA


- Fitting Position: before catalytic converter
-
Thread Size: M14x1,
5 - Cable Length [mm]: 676
-
Exhaust System: for pre-
catalytic converter - Socket colour: black
- Manufacturer: FAE





- Required quantity: 2
-
for PR number: K8G,
K8R - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 23
- Height [mm]: 28.7
- Number of pins: 3
- Diameter [mm]: 15.5
- Name: VA 890010
- Manufacturer: VALEO
Fitting Position: outer, both sides, Front, Rear, lateral installation





























- Fitting Position: after soot particulate filter
- Manufacturer: BOSCH


- Engine Code: DGTA
-
Emission Standard: Euro 6d-
Temp - Operating Mode: Electric
- Voltage [V]: 5
- Conductor Number: 2
- Cable Length [mm]: 765
-
Thread Size: M14 x 1,
5 - Total Length [mm]: 835
- Fitting Position: before soot particulate filter
- Manufacturer: PIERBURG


- General Information: air mass meter
- Manufacturer: BORSEHUNG





- Fitting Position: before exhaust turbocharger
- Overall Length [mm]: 693
- Cable Length [mm]: 530
- Fitting Depth [mm]: 18
- Connector Shape: D Shape
-
Connecting thread: M14x1.5-
6h - Number of pins: 2
-
Operating temperature to [°C]: 1,
000 - Manufacturer: ERA





























- Fitting Position: before catalytic converter
- Cable Length [mm]: 632
- Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY


- Engine Code: DGTA
- Emission Standard: Euro 6
-
Exhaust System: for pre-
catalytic converter - Operating Mode: Electric
- Voltage [V]: 5
- Conductor Number: 2
- Cable Length [mm]: 680
-
Thread Size: M14 x 1,
5 - Total Length [mm]: 750
- Manufacturer: PIERBURG


- General Information: air mass meter
- Manufacturer: VIKA


























- Housing Type: with housing
- Number of pins: 4
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
-
Name: DE AF10656-
12B1 - Manufacturer: DELPHI





























- Fitting Position: before soot particulate filter
- Manufacturer: BOSCH


- Oxygen Sensor: Heated
- General Information: lambda probe; 5 wire
- Manufacturer: VIKA


- for OE number: 04L906461B
- Manufacturer: MEAT&DORIA



- Required quantity: 1
-
Mounting Type: Pipe-
neck - Suction pipe connector diameter [mm]: 69
- Number of pins: 4
-
Supplementary Article/Supplementary Info: without gasket/
seal - Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.



- Production date from: 29.11.2021
- Number of pins: 7
- for OE number: 2Q0907561J
- Always compare old and new part (in particular OE No.):
-
Supplementary Article/Info 2: Control Unit/
Software must be trained/ updated - Observe the vehicle manufacturer specifications:
- Assy./disassy. by qualified personnel required!:
- Manufacturer: METZGER


- Required quantity: 1
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Fitting Depth [mm]: 24
- Supplementary Article/Info 2: with seal ring