• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Lisainfo: Support for shock absorber, rear, upper
• Additional information: Support for shock absorber, rear, upper

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Lisainfo: Support for shock absorber, rear, upper
• Additional information: Support for shock absorber, rear, upper

• Installatsiooni pool: esisild vasakul, esisild paremal
• Laagriteostus: Kuullaager
• Lisainfo: Ball bearing for strut bearing
• Additional information: Ball bearing for strut bearing

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info 2: ohne Wälzlager
• vajaminev tükihulk: 2
• Lisainfo: SKODA, VW
• Additional information: SKODA, VW

• OE-numbri jaoks: 1J0512149B
• Installatsiooni pool: Tagasild
• Kaal (g): 104
• Name: IM 37242
• Manufacturer: ORIGINAL IMPERIUM

• Material: Rubber
• Fitting Position: Upper, Rear Axle both sides
• Outer Diameter [mm]: 75
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• SVHC: SVHS aineid ei esine
• Name: LU 713038820
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right
• Bearing Type: Rolling Bearing
• Outer Diameter [mm]: 111
• Fabrication Number: AD-VW-002
• Name: NTY AD-VW-002
• Manufacturer: NTY

• Material: Metal, Plastic
• Outer Diameter [mm]: 112
• Fabrication Number: AD-VW-011
• Fitting Position: Front Axle Left, Front Axle Right

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 11
• Fabrication Number: AD-VW-018
• Name: NTY AD-VW-018
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• for OE number: 1J0 513 353 B S1
• Fabrication Number: AD-VW-020

• Fitting Position: Rear Axle Left, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: AD-VW-007

• Kaal (kg): 0,235
• Installatsiooni pool: Esisild
• vajaminev tükihulk: 2
• Name: TG 00728289
• Manufacturer: TEDGUM

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: DELLO AUTOMEGA
• Additional information: 110067510 DELLO
• Lisainfo: 110067510 DELLO

• Jämedus/Tugevus (mm): 27
• Siseläbimõõt [mm]: 68
• Välisläbimõõt [mm]: 111
• Materjal: Metall, Plastik
• Laagriteostus: Rulllaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,26
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN
• Additional information: F22498
• Lisainfo: F22498

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: AD-VV-005

Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle

• Fitting Position: Front Axle Left, Front Axle Right
• Laagritüüp: Kummi-metalllaager
• Piirangutega toode/piirangu info 2: ilma laagrita
• Manufacturer: DELLO AUTOMEGA

• Suspension: for vehicles without bad road version
• Installatsiooni pool: esisild vasakul, esisild paremal
• vajaminev tükihulk: 2
• Piirangutega toode/piirangu info 2: ilma laagrita
• alternatiivne remondikomplekt: 80001669
• Name: COC 80001561
• Manufacturer: CORTECO

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: LMI 3176401
• Manufacturer: LEMFÖRDER

OE-numbri jaoks: 1K0 412 249 B, 6N0 412 249 B, 6N0 412 249 C, 6N0 412 249 D, 6N0 412 249 E

• Suspension: for vehicles with bad road version
• Installatsiooni pool: esisild vasakul, esisild paremal
• vajaminev tükihulk: 2
• Name: COC 80004832
• Manufacturer: CORTECO

• Installatsiooni pool: Tagasild
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Quantity: 2
• Thickness [mm]: 27
• Weight [kg]: 0.26
• Bearing Type: Rolling Bearing
• Inner Diameter [mm]: 68
• Outer Diameter [mm]: 111
• Material: Metal, Plastic
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: deep groove ball thrust bearing; front; STO
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Supplementary Article/Info 2: without bearing
• Fabrication Number: AD-VV-003

• Fitting Position: Front Axle Left, Front Axle Right
• Laagritüüp: Kummi-metalllaager
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 66
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 6Y-2-022 802, 6Y-2-345 001
• Block Separation:
• Installatsiooni pool: esisild vasakul, esisild paremal
• Lisainfo: Bearing for strut without bearing, front
• Additional information: Bearing for strut without bearing, front

Suspension: for vehicles with bad road version, for vehicles with sports suspension, for vehicles with standard suspension

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: SACHS
• Lisainfo: 801 038
• Additional information: 801 038

OE-numbri jaoks: 1K0 412 249 B, 6N0 412 249 B, 6N0 412 249 C, 6N0 412 249 D, 6N0 412 249 E

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Fabrication Number: AD-VW-024

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Material: Rubber/Metal
• Fabrication Number: AD-VW-019

• Fitting Position: Front Axle
• Hulk telje kohta: 2
• Name: SK VKD35025
• Manufacturer: SKF
• Lisainfo: VKD 35025 SKF
• Additional information: VKD 35025 SKF

• vajaminev tükihulk: 2
• Siseläbimõõt [mm]: 10,2
• Installatsiooni pool: all, Tagasild mõlemapoolselt
• Kaal (kg): 0,087
• Välisläbimõõt [mm]: 43
• Name: TG 00729445
• Manufacturer: TEDGUM

• Suspension: for vehicles with bad road version
• Installatsiooni pool: esisild vasakul, esisild paremal
• vajaminev tükihulk: 2
• Piirangutega toode/piirangu info 2: ilma laagrita
• alternatiivne remondikomplekt: 80001670
• Name: COC 80001562
• Manufacturer: CORTECO

• Quantity: 2
• Fitting Position: Rear Axle
• Weight [g]: 280
• General Information: Shock absorber upper cover
• Manufacturer: BORSEHUNG
• Additional information: 1J0513353G BOR
• Lisainfo: 1J0513353G BOR

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Hulk telje kohta: 2
• OE-numbri jaoks: 1J0 513 353 B, 6R0 513 353, 6R0 513 353 B
• Piirangutega toode/piirangu info: Veerelaagrid ei ole vajalikud
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: LMI 3526901
• Manufacturer: LEMFÖRDER

• Installatsiooni pool: Tagasild
• Tehniline informatsioon: Suspension mounting only (no bearing)
• Name: KY SM9704
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Vehicle Identification Number (VIN) from: 6Y-2-022 802, 6Y-2-345 001
• Block Separation:
• Installatsiooni pool: esisild vasakul, esisild paremal
• Laagritüüp: Kummi-metalllaager
• Lisainfo: Bearing for strut without bearing, front
• Additional information: Bearing for strut without bearing, front

Suspension: for vehicles with bad road version, for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Rear Axle
• Kaal (kg): 0,3
• Piirangutega toode/piirangu info 2: ilma laagrita
• Garantii: 5 aastat garantii
• pakendi pikkus [cm]: 13,6
• pakendi laius [cm]: 11,8
• pakendi kõrgus [cm]: 11,4
• Manufacturer: MONROE

• Fitting Position: Rear Axle
• Hulk telje kohta: 2
• Üldine informatsioon: SKF soovitab alati vahetada mõlemat poolt
• Name: SK VKDA40104
• Manufacturer: SKF

• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 111
• Inner Diameter [mm]: 68
• Material: Rubber/Metal
• for OE number: 1K0 412 249 B
• Name: Top mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI/VW/SKODA/SEAT
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: ******6Y*2X022802, ******6Y*2*345001
• for PR number: G03, G04, G06
• Block Separation:
• Pikkus (mm): 135
• Kõrgus (mm): 50
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 68
• Materjal: Kumm/metall
• Installatsiooni pool: Esisild
• Kaal (kg): 0,833
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Name: SW 32 92 2930
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: ******6Y*2*345000, ******6Y*SX022801
• Block Separation:
• Vehicle Identification Number (VIN) from: ******6Y*2*345001, ******6Y*SX022802
• Suspension: for vehicles with standard suspension
• Pikkus (mm): 135
• Laius (mm): 128
• Siseläbimõõt [mm]: 14
• Kõrgus (mm): 50
• Välisläbimõõt [mm]: 65, 66
• Materjal: Kumm/metall
• Installatsiooni pool: Esisild
• Kaal (kg): 0,825
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Name: SW 30 54 0025
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• SVHC: SVHS aineid ei esine
• Name: LU 814007210
• Manufacturer: FAG

• Vehicle Identification Number (VIN) from: ******6Y*2X022802, ******6Y*2*345001
• for PR number: G03, G04, G06
• Block Separation:
• Pikkus (mm): 135
• Kõrgus (mm): 50
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 68
• Materjal: Kumm/metall
• Installatsiooni pool: Esisild
• Kaal (kg): 0,833
• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Left, Rear Axle
• Osade arv [-osaline]: 1
• Välisläbimõõt 1 [mm]: 62
• Laius 1 (mm): 58
• Laius 2 (mm): 126
• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• Name: SN KB957.04
• Manufacturer: NTN-SNR

• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Installatsiooni pool: esisild vasakul, esisild paremal
• alternatiivne remondikomplekt: 31771 01
• Hulk telje kohta: 2
• OE-numbri jaoks: 6N0 412 331 E, 6Q0 412 331 B
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: LMI 3134301
• Manufacturer: LEMFÖRDER

• Fitting Position: Front Axle
• SVHC: SVHS aineid ei esine
• Name: LU 815003830
• Manufacturer: FAG

• Required quantity: 2
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 61
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Suspension: for vehicles without bad road version
• Installatsiooni pool: esisild vasakul, esisild paremal
• vajaminev tükihulk: 2
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Manufacturer: CORTECO
• Name: COC 80001669

• Piirangutega toode/piirangu info 2: ilma kuullaagrita
• Installatsiooni pool: esisild vasakul, esisild paremal
• alternatiivne remondikomplekt: 802 418
• Hulk telje kohta: 2
• OE-numbri jaoks: 6N0 412 331 E, 6Q0 412 331 B
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: SACHS

• for PR number: 1GA, 1GB, 1GG
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Kaal (kg): 0,4
• pakendi pikkus [cm]: 14
• pakendi laius [cm]: 4,4
• pakendi kõrgus [cm]: 14,5
• Manufacturer: MONROE

• for PR number: 1GA
• Inner Diameter [mm]: 14
• for OE number: 6N0 412 331 E
• Material: Rubber/Metal
• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 65, 66
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SKODA/AUDI/VW/SEAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SKODA/AUDI/VW/SEAT
(kvaliteediklass: PJ)"

• Suspension: for vehicles with bad road version
• Installatsiooni pool: esisild vasakul, esisild paremal
• vajaminev tükihulk: 2
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Name: COC 80001670
• Manufacturer: CORTECO

• Installatsiooni pool: Esisild
• OE-numbri jaoks: 1K0412249B
• Manufacturer: KAMOKA
• Additional information: 209036 KAMOKA
• Lisainfo: 209036 KAMOKA

• Fitting Position: Front Axle
• Manufacturer: ASHIKA

Suspension: for vehicles with bad road version, for vehicles with standard suspension

• Quantity: 2
• Thickness [mm]: 27
• Weight [kg]: 0.26
• Bearing Type: Rolling Bearing
• Inner Diameter [mm]: 68
• Outer Diameter [mm]: 111
• Material: Metal, Plastic
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: deep groove ball thrust bearing; front
• Manufacturer: BORSEHUNG

• Osade arv [-osaline]: 2
• Soovitatava eritööriista tootenumber: Clas : OM1112, Clas : OP3231
• Installatsiooni pool: esisild paremal, esisild vasakul
• Name: SN KB657.13
• Manufacturer: NTN-SNR

• Materjal: Kumm/metall
• Installatsiooni pool: Esisild
• Kaal (kg): 1,16
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Manufacturer: FEBI BILSTEIN
• Additional information: FE26460
• Lisainfo: FE26460

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Kaal (kg): 1,16
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Name: SW 30 92 6460
• Manufacturer: SWAG
• Lisainfo: 30 92 6460 SWA
• Additional information: 30 92 6460 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Manufacturer: BGA

• Fitting Position: Front Axle
• Hulk telje kohta: 2
• Üldine informatsioon: SKF soovitab alati vahetada mõlemat poolt
• Name: SK VKDA35115
• Manufacturer: SKF

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Installatsiooni pool: Esisild
• Tehniline informatsioon: Suspension mounting + separated suspension bearing
• Name: KY SM1713
• Manufacturer: KYB
• Additional information: SM1713 KAYABA
• Lisainfo: SM1713 KAYABA

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Installatsiooni pool: Esisild
• Kaal (g): 1 003
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Komponendinumber: 2
• Laagritootja: IMPERGOM
• Name: IM 37499
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle both sides
• Quality class: PJ
• Name: Suspension strut support bearing left=right

Suspension: for vehicles with bad road version, for vehicles with standard suspension

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Name: LMI 3177101
• Manufacturer: LEMFÖRDER

• Fitting Position: Front Axle
• Kaal (kg): 1,2
• Piirangutega toode/piirangu info 2: koos laagriga
• Garantii: 5 aastat garantii
• pakendi pikkus [cm]: 13,2
• pakendi laius [cm]: 11
• pakendi kõrgus [cm]: 10,7
• Manufacturer: MONROE

• Construction Year from: 11.2001
• Construction Year to: 11.2001
• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 2-345 001
• Vehicle Identification Number (VIN) to: 2-345 000
• Manufacturer: HUTCHINSON

• Vehicle Identification Number (VIN) from: ******6Y*2X022802, ******6Y*2*345001
• for PR number: G03, G04, G06
• Block Separation:
• Materjal: Kumm/metall
• Installatsiooni pool: Esisild
• Kaal (kg): 1,181
• Piirangutega toode/piirangu info 2: koos kuullaagriga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: ******6Y*2X022802, ******6Y*2*345001
• for PR number: G03, G04, G06
• Block Separation:
• Installatsiooni pool: Esisild
• Kaal (kg): 1,249
• Piirangutega toode/piirangu info 2: koos kuullaagriga, koos kinnitusmaterjaliga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: G01, G02, G05
• Block Separation:
• Materjal: Kumm/metall
• Installatsiooni pool: Esisild
• Kaal (kg): 1,313
• Piirangutega toode/piirangu info 2: koos kuullaagriga, koos kinnitusmaterjaliga
• Name: SW 30 93 7884
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: G01, G02, G05
• Block Separation:
• Materjal: Kumm/metall
• Installatsiooni pool: Esisild
• Kaal (kg): 1,313
• Piirangutega toode/piirangu info 2: koos kinnitusmaterjaliga, koos kuullaagriga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.