Inner Diameter [mm]: 32

• Engine Code: BLT
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: JP GROUP
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Quantity per packing unit: 10
• Shape: round, O-Ring
• Inner Diameter [mm]: 55
• Material: MVQ (silicone rubber)
• Thickness [mm]: 3
• Outer Diameter [mm]: 61
• Name: TIHEND, EGR-KLAPP
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Shape: O-Ring
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Lower
• Gasket Design: Fibre Composite
• Chemical Properties: Asbestos Free
• Mounting Type: Flange mounting
• Number of flange connections: 2
• Name: TIHEND, EGR-KLAPP
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter [mm]: 32
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Quantity per packing unit: 10
• Gasket Design: Steel
• Mounting Type: Flange mounting
• Flange Hole Diameter [mm]: 25
• Number of flange connections: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ASZ
• Shape: round
• Material: Rubber
• Name: Tihend, EGR-klapp
• Manufacturer: MAX
• Lisainfo: 70-0130
• Additional information: 70-0130

• Quantity per packing unit: 5
• Inner Diameter [mm]: 32
• Manufacturer: ELRING
• Lisainfo: 729.970 ELR
• Additional information: 729.970 ELR

• Engine Code: BLT
• Construction Year from: 10.2005
• Thickness [mm]: 1
• Width [mm]: 46
• Length [mm]: 76
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU

• Fitting Position: Intake Manifold
• Quantity per packing unit: 50
• Inner Diameter [mm]: 60
• Outer Diameter [mm]: 66
• Thickness [mm]: 3
• Material: FPM (fluoride rubber)
• Shape: O-Ring
• Manufacturer: ELRING

• Engine Code: BLT
• Construction Year from: 10.2005
• Thickness [mm]: 0.4
• Inner Diameter [mm]: 46
• Outer Diameter [mm]: 76
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU
• Additional information: AJU01112700
• Lisainfo: AJU01112700

• Weight [kg]: 0.007
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BLT
• Shape: O-Ring
• Cooling Hose: from auxiliary water pump to crankcase
• Diameter [mm]: 55.2
• Fitting Position: Throttle Valve at EGR valve
• Thickness [mm]: 2.62
• Weight [kg]: 0.002
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ASZ
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: KAMOKA
• Additional information: F19024
• Lisainfo: F19024

• Weight [kg]: 0.04
• Manufacturer: METALCAUCHO

• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gasket/seal
• General Information: EGR Valve
• Manufacturer: VIKA

• Operating Mode: pneumatic
• Fabrication Number: EGR-SK-000
• Manufacturer: NTY
• Name: NTY EGR-SK-000

• Engine Code: BLT
• Operating Mode: pneumatic
• Manufacturer: DENCKERMANN FILTRY

• Engine Code: BLT
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: KAMOKA

• Engine Code: BLT
• Valve type: Diaphragm Valve
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: EGR-KLAPP
• Manufacturer: MAX

• for OE number: 038131521BL
• Supplementary Article/Supplementary Info: without gaskets/seals
• Supplementary Article/Info 2: without bolts/screws
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: pneumatic
• Manufacturer: JPN

• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Model Year from: 2002
• Model Year to: 2009
• New Part:
• Used part return not required:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Model Year from: 1998
• Model Year to: 2010
• New Part:
• Used part return not required:
• Manufacturer: ABAKUS LORO
• Additional information: 121-01-030 ABAK
• Lisainfo: 121-01-030 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Packaging length [cm]: 13
• Packaging width [cm]: 11
• Packaging height [cm]: 9
• Weight [kg]: 0.442
• Valve type: Diaphragm Valve
• Manufacturer: AKSDASIS

• Engine Code: BLT
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: WAHLER

• Operating Mode: pneumatic
• Manufacturer: AUTO-GH

• Supplementary Article/Supplementary Info: with gaskets/seals
• Fabrication Number: EGR-VW-044
• Manufacturer: NTY
• Name: NTY EGR-VW-044

• Operating Mode: pneumatic
• Fabrication Number: EGR-VW-011
• Manufacturer: NTY

• Engine Code: ASZ
• Vehicle Identification Number (VIN) from: 6Y-23473 987
• Operating Mode: pneumatic
• Manufacturer: DENCKERMANN FILTRY

• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Supplementary Article/Supplementary Info: with gaskets/seals
• for OE number: 038 131 501 AN
• Guarantee: 3 years guarantee
• Operating Mode: Electric
• Voltage [V]: 12
• Seal Material: Metal
• Width [mm]: 122
• Height [mm]: 135
• Length [mm]: 142
• Weight [g]: 573
• Housing material: Metal, Aluminium
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: BLT
• Operating Mode: pneumatic
• Valve type: Diaphragm Valve
• Supplementary Article/Supplementary Info: with gasket/seal
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Construction Year to: 04.2007
• Engine Code: BLT
• Operating Mode: pneumatic
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.58
• Manufacturer: SKV GERMANY
• Name: CE 14SKV019

• Operating Mode: pneumatic
• Weight [kg]: 0.5
• Supplementary Article/Supplementary Info: with gaskets/seals
• Required quantity: 1
• General Information: EGR Valve
• Manufacturer: VIKA

• Engine Code: BLT
• Operating Mode: pneumatic
• for OE number: 038131501AN
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: NRF

• Operating Mode: pneumatic
• New Part:
• Used part return not required:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Gaskets/Seals/Seal Rings: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for article number: 555085
• Manufacturer: KAMOKA

• Engine Code: BLT
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: DRM 211104
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Engine Code: BLT
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.37
• Manufacturer: SKV GERMANY

• Operating Mode: pneumatic
• Manufacturer: JAPKO

• Engine Code: BLT
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: BORGWARNER (WAHLER)

• Supplementary Article/Supplementary Info: with gasket/seal
• Operating Mode: pneumatic
• Quality: OE EQUIVALENT
• for OE number: MN980376
• Name: EGR-klapp
• Manufacturer: MD

• Engine Code: BLT
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 211150

• Operating Mode: pneumatic
• Manufacturer: ASHIKA

• Engine Code: BLT
• Material: Aluminium
• Operating Mode: pneumatic
• Name: EGR-klapp
• Manufacturer: NIS
• Lisainfo: JEEP PATRIOT(MK) (07-) 2.0 CRDi
• Additional information: JEEP PATRIOT(MK) (07-) 2.0 CRDi

Supplementary Article/Info 2: without sensor, without vacuum bypass, without cable, without electronics Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Engine Code: BLT
• Operating Mode: pneumatic
• Supplementary Article/Info 2: with EGR valve
• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Emission Standard: Euro 2
• Manufacturer: VALEO

• Engine Code: ASZ
• Material: Aluminium
• Operating Mode: pneumatic
• Name: EGR-klapp
• Manufacturer: NIS

Supplementary Article/Info 2: without sensor, with vacuum bypass, without cable, without electronics Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• for OE number: 038 131 501 AF
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Engine Code: BLT
• Number of connectors: 1
• Operating Mode: pneumatic
• Weight [kg]: 0.5
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: ENERGY

• Engine Code: ASZ
• Operating Mode: pneumatic
• for OE number: 038131501AB
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: NRF

• Name: EGR-KLAPP
• Manufacturer: MAG

• Engine Code: BLT
• New part without deposit:
• Weight [kg]: 0.5
• Required quantity: 1
• Operating Mode: pneumatic
• Valve type: Diaphragm Valve
• Alternatively:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ASZ
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-klapp
• Manufacturer: WAH

• Engine Code: BLT
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Net weight [kg]: 0.47
• Name: EGR-KLAPP
• Manufacturer: ELS

• Engine Code: ASZ
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 211111

• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gasket/seal
• Packaging length [cm]: 20
• Packaging width [cm]: 19
• Packaging height [cm]: 19
• Weight [kg]: 0.76
• for OE number: 038131501AB, 038131501AM
• Valve type: Diaphragm Valve
• Manufacturer: AKSDASIS

• Engine Code: ASZ
• Weight [kg]: 0.675
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ASZ
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: without gasket/seal
• Quality: OE EQUIVALENT
• for OE number: 571822112046
• Name: EGR-klapp
• Manufacturer: MD

• Engine Code: ASZ
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Engine Code: ASZ
• Operating Mode: pneumatic
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.8
• Manufacturer: SKV GERMANY
• Name: CE 14SKV080

• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Packaging length [cm]: 19
• Packaging width [cm]: 19
• Packaging height [cm]: 18
• for OE number: 038131501E, 045131501C, 045131501L
• Valve type: Diaphragm Valve
• Weight [kg]: 0.74
• Manufacturer: AKSDASIS

• Engine Code: ASZ
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Engine Code: ASZ
• Name: DE EG10518-12B1
• Manufacturer: DELPHI

• for OE number: 038131521BL
• Name: Toruhendus, EGR-klapp
• Manufacturer: MD

• Name: EGR-KLAPP
• Manufacturer: MAG

• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Supplementary Article/Supplementary Info: with gaskets/seals
• for OE number: 038 131 501 AM
• Guarantee: 3 years guarantee
• Operating Mode: pneumatic
• Width [mm]: 173
• Height [mm]: 198
• Length [mm]: 195
• Weight [g]: 840
• Seal Material: Metal, Rubber
• Housing material: Aluminium
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: BLT
• Number of connectors: 1
• Operating Mode: pneumatic
• Weight [kg]: 0.5
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: DELPHI
• Name: DE EG10421-12B1

• Engine Code: BLT
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gasket/seal
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• New Part:
• Engine Code: BLT
• Housing Type: Aluminium Housing
• Operating Mode: pneumatic
• Cooling Type: Air cooled
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: TRI

• Engine Code: BLT
• Number of connectors: 1
• Operating Mode: pneumatic
• Weight [kg]: 0.5
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BLT
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: without EGR cooler, with gasket/seal
• Manufacturer: VDO

• Construction Year to: 04.2007
• Supplementary Article/Supplementary Info: with gaskets/seals
• Operating Mode: Vacuum-controlled
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

• Engine Code: BLT
• Valve type: Diaphragm Valve
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: EGR-KLAPP
• Manufacturer: PIE

• Engine Code: ASZ
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Guarantee: 5 years guarantee
• Manufacturer: HITACHI

• Engine Code: ASZ
• Operating Mode: pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: BORGWARNER (WAHLER)