Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Inner Diameter [mm]: 32
- Quantity per packing unit: 10
-
Shape: round,
O- Ring - Inner Diameter [mm]: 55
-
Material: MVQ
(silicone rubber) - Thickness [mm]: 3
- Outer Diameter [mm]: 61
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Shape: O-
Ring - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Lower
- Gasket Design: Fibre Composite
- Chemical Properties: Asbestos Free
- Mounting Type: Flange mounting
- Number of flange connections: 2
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 32
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Quantity per packing unit: 10
- Gasket Design: Steel
- Mounting Type: Flange mounting
- Flange Hole Diameter [mm]: 25
- Number of flange connections: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: ASZ
- Shape: round
- Material: Rubber
-
Name: Tihend,
EGR- klapp - Manufacturer: MAX
-
Lisainfo: 70-
0130 -
Additional information: 70-
0130
- Quantity per packing unit: 5
- Inner Diameter [mm]: 32
- Manufacturer: ELRING
- Lisainfo: 729.970 ELR
- Additional information: 729.970 ELR
- Engine Code: BLT
- Construction Year from: 10.2005
- Thickness [mm]: 1
- Width [mm]: 46
- Length [mm]: 76
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: AJU
- Fitting Position: Intake Manifold
- Quantity per packing unit: 50
- Inner Diameter [mm]: 60
- Outer Diameter [mm]: 66
- Thickness [mm]: 3
-
Material: FPM
(fluoride rubber) -
Shape: O-
Ring - Manufacturer: ELRING
- Engine Code: BLT
- Construction Year from: 10.2005
- Thickness [mm]: 0.4
- Inner Diameter [mm]: 46
- Outer Diameter [mm]: 76
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: AJU
- Additional information: AJU01112700
- Lisainfo: AJU01112700
- Weight [kg]: 0.007
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Emission Standard: Euro 4
- Number of Gaskets/Seals/Seal Rings: 2
- Manufacturer: FAST
- Engine Code: BLT
-
Shape: O-
Ring - Cooling Hose: from auxiliary water pump to crankcase
- Diameter [mm]: 55.2
- Fitting Position: Throttle Valve at EGR valve
- Thickness [mm]: 2.62
- Weight [kg]: 0.002
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ASZ
- Number of Gaskets/Seals/Seal Rings: 2
- Number of sealing rings: 1
-
Name: Tihendikomplekt,
EGR- ssteem - Manufacturer: ELR
- Engine Code: BLT
- Number of sealing rings: 2
- Number of Gaskets/Seals/Seal Rings: 2
-
Name: Tihendikomplekt,
EGR- ssteem - Manufacturer: ELR
- Engine Code: BLT
- Number of Gaskets/Seals/Seal Rings: 4
-
for article number: V10-
63- 0011, V10- 63- 0011- 1 - Fitting Position: Engine Compartment
- Weight [kg]: 0.012
- Manufacturer: VEMO GERMANY
-
Lisainfo: V10-
63- 9011 VEM -
Additional information: V10-
63- 9011 VEM
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: BLT,
ASZ - Manufacturer: FA1 FISCHER
- Name: FI KG110045E
- Engine Code: ASZ
- Quantity per packing unit: 100
- Inner Diameter [mm]: 54.5
- Thickness [mm]: 3
-
Material: FPM
(fluoride rubber)
-
Engine Code: BLT,
ASZ - Quantity per packing unit: 100
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
-
Engine Code: BLT,
ASZ - Quantity per packing unit: 5
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
- Alternatively:
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks