Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Manufacturer: TOPRAN HANS PRIES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Transmission Type: Manual Transmission
- Core Length [mm]: 629
- Core Width [mm]: 399
- Core Depth [mm]: 22
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
-
Lisainfo: Radiator,
630x413 mm, PL/ ALU -
Additional information: Radiator,
630x413 mm, PL/ ALU
- Quantity per packing unit: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pressure [bar]: 1.5
- Manufacturer: ASHIKA
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles without air conditioning
- Core Length [mm]: 430
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Packaging length [cm]: 59.5
- Packaging width [cm]: 44
- Packaging height [cm]: 11.5
- Weight [kg]: 2.2
- Manufacturer: AKSDASIS
- Material: Aluminium
- Core Length [mm]: 635
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: NRF
- Lisainfo: 632*389*26
- Additional information: 632*389*26
- Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
- Netopikkus [mm]: 416
- Netolaius [mm]: 430
- Netosügavus [mm]: 23
- Manufacturer: JPN
- Name: Radiator
- Quality class: ZJ
Lisainfo: POLO 01- (kvaliteediklass ZJ)
- Name: Radiator
- Quality class: ZJ
Lisainfo: CORDOBA 02- (kvaliteediklass ZJ)
- Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
- Netopikkus [mm]: 416
- Netolaius [mm]: 630
- Netosügavus [mm]: 23
- Manufacturer: JPN
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 630
- Core Width [mm]: 414
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Core Length [mm]: 635
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: KAMOKA
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 630
- Core Width [mm]: 414
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 630
- Core Width [mm]: 416
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Supplementary Article/Info 2: without expansion tank
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: VOLKSWAGEN POLO IV
(9N) (01- ) 1.4 i 16V -
Additional information: VOLKSWAGEN POLO IV
(9N) (01- ) 1.4 i 16V
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 630
- Core Width [mm]: 414
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
-
Transmission Type: 5-
Speed Manual Transmission - Core Width [mm]: 415
- Core Length [mm]: 635
- Core Depth [mm]: 23
- Material: Aluminium
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Heating/Cooling: for vehicles without oil cooler
- Supplementary Article/Info 2: with coolant regulator
- Radiator type: Mechanically jointed cooling fins
- Weight [kg]: 3.86
- Manufacturer: VALEO
Vehicle Equipment: for vehicles with air conditioning (manually controlled)
- Transmission Type: Manual Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Core Length [mm]: 632
- Core Width [mm]: 389
- Core Depth [mm]: 26
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 76
- Packaging width [cm]: 46
- Packaging height [cm]: 14
- Weight [kg]: 2.382
- Manufacturer: AKSDASIS
- Engine Code: AZL
- Core Width [mm]: 414
- Core Length [mm]: 630
- Core Depth [mm]: 23
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Manufacturer: MAGNETI MARELLI
- Core Depth [mm]: 0
- Core Length [mm]: 0
- Core Width [mm]: 0
- General Information: radiator; pipe enlarging
- Manufacturer: VIKA
- Core Length [mm]: 632
- Core Width [mm]: 395
- Core Depth [mm]: 24
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 79.5
- Packaging width [cm]: 47
- Packaging height [cm]: 11.5
- Weight [kg]: 2.42
- for OE number: 6Q0121253M
- Manufacturer: AKSDASIS
- New Part:
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 630
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Water Tank Material (radiator): Plastic
-
Vehicle Equipment: for vehicles with/
without air conditioning -
Transmission Type: Automatic Transmission,
Manual Transmission - Packaging width [cm]: 12
-
Net Weight [g]: 3,
274 - Packaging height [cm]: 46.5
- Packaging length [cm]: 79
- Manufacturer: MAHLE BEHR HELLA TERMIKA
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 430
- Core Width [mm]: 413
- Core Depth [mm]: 26
- Water Tank Material (radiator): Plastic
- Supplementary Article/Info 2: with seal ring
- Vehicle Equipment: for vehicles without air conditioning
- Transmission Type: Manual Transmission
- Packaging height [cm]: 10.5
-
Net Weight [g]: 1,
840 - Packaging width [cm]: 44
- Packaging length [cm]: 62.5
- Manufacturer: MAHLE BEHR HELLA TERMIKA
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Transmission Type: Manual Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Construction Year from: 03.2000
- Construction Year to: 12.2007
- Core Depth [mm]: 26
- Core Length [mm]: 628
- Core Width [mm]: 408
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Technical Information: quick connection inlet/
outlet - Name: Radiator
- Quality class: PJ
Lisainfo: CORDOBA 02- (kvaliteediklass P) Additional information: CORDOBA 02- (kvaliteediklass P)
- Core Depth [mm]: 26
- Core Length [mm]: 635
- Core Width [mm]: 395
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Technical Information: quick connection inlet/
outlet - Name: Radiator
- Quality class: PJ
Lisainfo: POLO 01- (kvaliteediklass P) Additional information: POLO 01- (kvaliteediklass P)
- Radiator type: Mechanically jointed cooling fins
- Heating/Cooling: incl. fan
- Core Length [mm]: 430
- Core Width [mm]: 415
- Core Depth [mm]: 20
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles without air conditioning
- Transmission Type: Manual Transmission
- Packaging width [cm]: 15.5
-
Net Weight [g]: 2,
590 - Packaging height [cm]: 61.5
- Packaging length [cm]: 90
- Manufacturer: MAHLE BEHR HELLA TERMIKA
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks