• Fitting Position: Front Axle Right, Front Axle Left
• Required quantity: 1
• Block Separation:
• Control/Trailing Arm Type: Control Arm
• for article number: 58013102 / 58013201
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle both sides
• Control/Trailing Arm Type: for control arm
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Replace in pairs only:
• Fitting Position: Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: for control arm
• for article number: 58081101, 58081002
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Control/Trailing Arm Type: Control Arm
• Fabrication Number: ZWD-VW-001
• Manufacturer: NTY

Fitting Position: Front Axle, outer, Left, Right, Lower, Front Axle Left, Front Axle Right

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Front Axle Left
• Material: Sheet Steel
• Control/Trailing Arm Design: Single Link
• Supplementary Article/Info 2: with rubber mount, without ball joint
• Surface: Cathodic Painting, Black-painted
• Also available as set:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Lower, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: DELLO AUTOMEGA

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, both sides, Lower
• Cone Size [mm]: 15
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Lisainfo: Wishbone, front
• Additional information: Wishbone, front

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Sheet Steel
• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT IBIZA, 02-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT IBIZA, 02-
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Front Axle Right, Lower, outer
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
SEAT IBIZA, 02-
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Lower
• Inner Diameter [mm]: 12
• Name: ALT 79494AL
• Manufacturer: ALTE AUTOMOTIVE

• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 2.55
• Supplementary Article/Info 2: with bearing
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, both sides
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 380
• Width [mm]: 350
• Height [mm]: 60
• Manufacturer: DELPHI
• Name: DE TC1428

• Control/Trailing Arm Type: Control Arm
• Weight [kg]: 2.682
• Fitting Position: Front Axle
• Required quantity: 1
• Supplementary Article/Info 2: with rubber sleeves
• Manufacturer: VIKA

General Information: Wishbone arm with bush for lower control;front; with small rubber bush

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP GROUP
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP GROUP
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Vehicle Identification Number (VIN) from: 6Y-1-259001
• Fitting Position: Front Axle, both sides
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Name: COC 49398873
• Manufacturer: CORTECO

• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 2.55
• Supplementary Article/Info 2: with bearing
• Name: SW 30 92 7530
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 821006610

• Fitting Position: Front Axle, both sides
• Control/Trailing Arm Type: Control Arm
• Guarantee: 3 years guarantee
• Weight [kg]: 2.8
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 04SKV065

• Fitting Position: Front Axle Left, Front Axle Right, outer, Lower
• Supplementary Article/Info 2: with rubber mount, without ball joint
• Material: Steel
• Control/Trailing Arm Type: Control Arm
• as standard:
• paired article number: 210696
• Weight [kg]: 2.517
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle both sides, Lower
• Required quantity: 2
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 321001
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Name: SK VKDS321001
• Manufacturer: SKF

• Trim Level: M20AFKS VP R
• for OE number: 6Q0407151L
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower Front Axle
• Name: DA DSS1239
• Manufacturer: DAYCO

• Control/Trailing Arm Type: Control Arm
• Steering: with tie rod ends
• Fitting Position: Front Axle Left
• Manufacturer: VIKA

General Information: Wishbone arm assembly for lower control;front left; with ball

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 15
• paired article number: 9050254
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 15
• paired article number: 9050253
• Manufacturer: KAMOKA

• paired article number: 37196
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 2.563
• Supplementary Article/Supplementary Info: with lock nut
• Supplementary Article/Info 2: with ball joint, with bearing
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Steering: with tie rod ends
• Fitting Position: Front Axle Right
• Manufacturer: VIKA

General Information: Wishbone arm assembly for lower control;front right; with ball

• Installatsiooni pool: esisild paremal, all
• Roolimisliik: Õõtshoob
• Manufacturer: OYODO

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• paired article number: 20-05452-1
• Weight [kg]: 3.13
• Name: DY 20-05452-2
• Manufacturer: DYS

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• paired article number: 20-05452-2
• Weight [kg]: 3.13
• Name: DY 20-05452-1
• Manufacturer: DYS

• paired article number: 37197
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 2.576
• Supplementary Article/Info 2: with ball joint, with bearing
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, both sides
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Material: Sheet Steel
• Article number of recommended accessories: 37883 01
• Manufacturer: LEMFORDER
• Name: LMI 2864402

SVHC: No information available, please contact the manufacturer!

• paired article number: 30 93 7196
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 2.563
• Supplementary Article/Supplementary Info: with lock nut
• Supplementary Article/Info 2: with ball joint, with bearing
• Name: SW 30 93 7197
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 30 93 7197
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 2.576
• Supplementary Article/Info 2: with bearing, with ball joint
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Name: SW 30 93 7196
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower, Front Axle Left
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 321101 B
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Manufacturer: SKF
• Name: SK VKDS321100B

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 321100 B
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Manufacturer: SKF
• Name: SK VKDS321101B

• Fitting Position: Front Axle Right, Lower
• Material: Sheet Steel
• paired article number: TC1329
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 420
• Width [mm]: 350
• Height [mm]: 80
• Name: DE TC1330
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Front Axle, Lower
• Material: Sheet Steel
• paired article number: TC1330
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 420
• Width [mm]: 350
• Height [mm]: 80
• Name: DE TC1329
• Manufacturer: DELPHI

• paired article number: 37291
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 2.682
• Supplementary Article/Supplementary Info: with lock nut, with rubber mounts
• Supplementary Article/Info 2: with ball joint
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Thread Size: M12 x 1,5
• Cone Size [mm]: 14.8
• Inner Diameter [mm]: 12
• paired article number: 79530AL
• Name: ALT 79529AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Thread Size: M12 x 1,5
• Cone Size [mm]: 14.8
• Inner Diameter [mm]: 12
• paired article number: 79529AL
• Name: ALT 79530AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Steering: with tie rod ends
• Fitting Position: Front Axle Right
• Manufacturer: VIKA

General Information: Wishbone arm assembly for lower control;front right; with ball; with big and small rubber bush

• paired article number: 37292
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 2.669
• Supplementary Article/Info 2: with ball joint
• Supplementary Article/Supplementary Info: with rubber mounts, with lock nut
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Length [mm]: 360
• Thread Size: M12 x 1,5
• Cone Size [mm]: 14.8
• paired article number: 97311AL
• Name: ALT 97310AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Length [mm]: 360
• Thread Size: M12 x 1,5
• Cone Size [mm]: 14.8
• paired article number: 97310AL
• Name: ALT 97311AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle both sides, Lower
• Weight [kg]: 2.7
• Manufacturer: RTS

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Material: Sheet Steel
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEYLE

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• paired article number: 20-22018
• Weight [kg]: 3.13
• Name: DY 20-22019
• Manufacturer: DYS

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• paired article number: 20-22019
• Weight [kg]: 3.13
• Name: DY 20-22018
• Manufacturer: DYS

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Right
• Material: Steel
• Supplementary Article/Info 2: with bolts
• paired article number: FT15610
• Manufacturer: FAST

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Left
• Material: Steel
• Supplementary Article/Info 2: with bolts
• paired article number: FT15611
• Manufacturer: FAST

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Cone Size [mm]: 15
• Supplementary Article/Info 2: with rubber mount, with ball joint
• paired article number: 824 0003 30
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 824000430

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Cone Size [mm]: 15
• Supplementary Article/Info 2: with rubber mount, with ball joint
• paired article number: 824 0004 30
• SVHC: No SVHC present!
• Manufacturer: FAG

• Vehicle Identification Number (VIN) from: 6Y-1-259001
• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• paired article number: 49399609
• Name: COC 49400078
• Manufacturer: CORTECO

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Left
• Quality class: PJ
• Name: Control arm bracket left

• Construction Year to: 04.2007
• Fitting Position: Front Axle, Left, outer, Lower
• Weight [kg]: 3.1
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint, with rubber mount
• paired article number: L29565
• Packaging length [cm]: 44
• Packaging width [cm]: 35
• Packaging height [cm]: 8
• Manufacturer: MONROE

• Construction Year to: 04.2007
• Fitting Position: Front Axle, outer, Lower
• Weight [kg]: 3.1
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint, with rubber mount
• paired article number: L29566
• Packaging length [cm]: 44
• Packaging width [cm]: 35
• Packaging height [cm]: 8
• Manufacturer: MONROE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• External Thread 2 [mm]: M12x1,5
• Weight [kg]: 3.18
• Manufacturer: RTS

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• External Thread 2 [mm]: M12x1,5
• Weight [kg]: 3.18
• Manufacturer: RTS

• Installatsiooni pool: esisild vasakul, all
• Roolimisliik: Õõtshoob
• Väliskeere 2 [mm]: M12x1,5
• Manufacturer: PROFIPOWER

• Installatsiooni pool: esisild paremal, all
• Roolimisliik: Õõtshoob
• Väliskeere 2 [mm]: M12x1,5
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Control/Trailing Arm Type: Control Arm
• Steering: with tie rod ends
• Quantity per axle: 1
• Full Set:
• for components see parts list:
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with axle joint, with rubber mount, with coupling rod, with ball joint General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Manufacturer: GSP