Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Outer Diameter [mm]: 69
-
Lisainfo: Rubber mount for rear axle beam,
left/ right -
Additional information: Rubber mount for rear axle beam,
left/ right
-
for PR number: 0N1,
0N2 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Outer Diameter [mm]: 72
- Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for rear axle beam,
left/ right -
Additional information: Rubber mount for rear axle beam,
left/ right
- Length [mm]: 136
-
External Thread Size: M12 x 1,
5 - Quality/ Grade: 10.9
- Spanner Size: 18
- Bolt Head-/Nut Design: Male Hex
- DIN/ISO: 989
- Surface: Oiled
- Screw length below head [mm]: 125
- Weight [kg]: 0.125
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Width 1 [mm]: 90
- Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 72
- Manufacturer: DELPHI
- Name: DE TD655W
-
Material: Rubber/
Metal - Inner Diameter [mm]: 11
- Outer Diameter [mm]: 72
-
Mounting Type: Rubber-
Metal Mount - Observe service information:
-
Fabrication Number: ZTT-
VW- 006B -
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: NTY
-
Name: NTY ZTT-
VW- 006B
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- not for PR number: 0N7
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 72
- Inner Diameter [mm]: 11
- Width [mm]: 54.5
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Required quantity: 2
- Material: Plastic
- Outer Diameter [mm]: 69
- Inner Diameter [mm]: 12
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Thickness [mm]: 90
- Weight [kg]: 0.31
-
Material: Rubber/
Metal - Required quantity: 2
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 72
- General Information: bonded rubber bush
- Manufacturer: VIKA
-
Fitting Position: Rear Axle,
both sides - Length [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 72
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: GSP
- Fitting Position: Rear
- Outer Diameter [mm]: 72
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 80
- Width [mm]: 90
- Name: ALT 83552AL
- Manufacturer: ALTE AUTOMOTIVE
- Diameter 4 [mm]: 72
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Suspension beam bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A3/VW GOLF IV
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A3/VW GOLF IV
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 72
- Width [mm]: 90
- SVHC: No SVHC present!
- Name: LU 829047510
- Manufacturer: FAG
- new version:
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 72
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.31
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 71
- Weight [kg]: 0.314
- Fitting Position: Rear Axle
- Required quantity: 2
- Inner Diameter [mm]: 12
- Height [mm]: 90
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: TEDGUM
- Name: TG 00725767
- not for PR number: 0N7
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 69
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- new version:
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 72
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.31
- Observe service information:
- Name: SW 30 93 1547
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Height [mm]: 90
- Weight [kg]: 0.315
- Inner Diameter [mm]: 12
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 315
- Outer Diameter 1 [mm]: 72
- Outer Diameter 2 [mm]: 78
- Manufacturer: METALCAUCHO
- Fitting Position: Rear Axle
- Required quantity: 2
-
Material: Rubber/
Metal - Weight [g]: 331
- Outer Diameter [mm]: 72
- Length [mm]: 90
- Name: IM 1711
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Rear Axle Left,
Rear Axle Right - for OE number: 1J0 501 541 D
- Manufacturer: GSP
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 69
- Length from [mm]: 90
-
Material: Rubber/
Metal - Mounting Type: Hydro Mount
- Name: Suspension beam bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A3/VW GOLF IV
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A3/VW GOLF IV
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 72
- Quantity per axle: 2
- Observe service information:
- Manufacturer: LEMFORDER
- Name: LMI 2123601
SVHC: No information available, please contact the manufacturer!
- Quantity per packing unit: 2
- Diameter [mm]: 69
-
Material: Rubber/
Metal - Axle alignment required after fitting:
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 69
- Mounting Type: Hydro Mount
- Weight [kg]: 0.442
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 07.2004
-
Fitting Position: Rear,
Left, Right, Front, Lower - Manufacturer: HUTCHINSON
- old version:
- Length [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 69
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Mounting Type: Hydro Mount
- Weight [kg]: 0.38
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Mounting Type: Hydro Mount
- Outer Diameter [mm]: 69
- Width [mm]: 90
- SVHC: No SVHC present!
- Name: LU 829049710
- Manufacturer: FAG
- for OE number: 1J0501541D
- Fitting Position: Rear
- Required quantity: 2
-
Material: Rubber/
Metal - Mounting Type: Hydro Mount
- Weight [g]: 709
- Outer Diameter [mm]: 69
- Name: IM 37204
- Manufacturer: ORIGINAL IMPERIUM
- old version:
- Length [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 69
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Mounting Type: Hydro Mount
- Weight [kg]: 0.38
- Observe service information:
- Name: SW 30 91 9928
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with heavy duty suspension
- for PR number: 0N7
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.4
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: 0N1,
0N2 - Block Separation:
- new version:
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 72
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.914
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with nuts
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: with accessories
- Outer Diameter [mm]: 72
- Manufacturer: LEMFORDER
- Name: LMI 2762701
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 69
- Width [mm]: 64
- Name: ALT 83545AL
- Manufacturer: ALTE AUTOMOTIVE
-
for PR number: 0N1,
0N2 - Block Separation:
- new version:
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 72
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.914
- Supplementary Article/Supplementary Info: with nuts
-
Supplementary Article/Info 2: with bolts/
screws - Observe service information:
- Name: SW 30 93 1722
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- General Information: repair kit for bonded rubber bush
- Manufacturer: VIKA
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - SVHC: No SVHC present!
- Manufacturer: FAG
- Model Year from: 2000
-
for combined PR number: 0N1,
0N2 - Fitting Position: Rear Axle
- Weight [kg]: 0.361
- Packaging length [cm]: 9.1
- Packaging width [cm]: 7.9
- Packaging height [cm]: 7.9
- Manufacturer: FEBEST
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Mounting Type: Hydro Mount
- Manufacturer: JP GROUP
-
Lisainfo: Repair Kit,
axle body -
Additional information: Repair Kit,
axle body
- old version:
- Length [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 69
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Mounting Type: Hydro Mount
- Weight [kg]: 0.78
- Supplementary Article/Supplementary Info: with nuts
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- old version:
- Length [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 69
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Mounting Type: Hydro Mount
- Weight [kg]: 0.78
- Supplementary Article/Supplementary Info: with nuts
- Observe service information:
- Name: SW 30 91 9930
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with heavy duty suspension
- for PR number: 0N7
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.094
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with nuts
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with heavy duty suspension
- for PR number: 0N7
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.094
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with nuts
- Name: SW 30 93 1744
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks