• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version

• Quantity: 2
• Fitting Position: Rear Axle
• Weight [kg]: 0.041
• Required quantity: 2
• General Information: protective pipe; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Height [mm]: 206
• Manufacturer: MAX
• Lisainfo: 72-2185
• Additional information: 72-2185

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• for PR number: 1JA, 1JB, 1JD
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle both sides
• General Information: protective pipe
• Manufacturer: BORSEHUNG

• Production date from: 01/03
• Production date to: 03/10
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle
• Height [mm]: 206
• for OE number: 6N0413175A
• Manufacturer: SASIC

• Quantity: 2
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Material: Thermoplast
• Required quantity: 2
• Outer Diameter [mm]: 68, 80
• General Information: protective pipe; front
• Manufacturer: VIKA

• Length [mm]: 160
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.041
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. GOLF/BORA

• for OE number: 1J0513425A
• Fitting Position: Rear Axle
• Height [mm]: 180
• Required quantity: 2
• Material: Thermoplast
• Weight [g]: 58
• Diameter 1 [mm]: 37
• Diameter 2 [mm]: 56
• Name: IM 37372
• Manufacturer: ORIGINAL IMPERIUM

• Height [mm]: 198
• Inner Diameter 1 [mm]: 63
• Weight [kg]: 0.07
• Required quantity: 2
• Fitting Position: Front Axle
• Inner Diameter 2 [mm]: 72
• Manufacturer: TEDGUM

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: SW 30 93 6006
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 206
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF

• Model Year from: 2005
• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Manufacturer: FEBEST

• Installatsiooni pool: Tagasild
• Amorditüüp: Gaasirõhk
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Amort-Ehitusliik: Teleskoop-amort
• Name: CFD 564778
• Manufacturer: DACO

Suspension: for vehicles without sports suspension, for vehicles with bad road version, for vehicles without standard suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY
• Lisainfo: DSF036G DKM
• Additional information: DSF036G DKM

Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMA0132
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA
• Lisainfo: MA-00034
• Additional information: MA-00034

Suspension: for vehicles with bad road version, for vehicles without standard suspension, for vehicles without sports suspension

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA-AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO
• Lisainfo: MJ00030 JAPKO
• Additional information: MJ00030 JAPKO

Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMJ0132
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

Suspension: for vehicles with bad road version, for vehicles without standard suspension, for vehicles without sports suspension

• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
SKODA FABIA 00-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Damper without Rebound Spring
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-2424
• Name: AMORT
• Manufacturer: MAX

Suspension: for vehicles with bad road version, for vehicles without standard suspension, for vehicles without sports suspension

• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Tagasild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Pikkus 1 [mm]: 648
• Pikkus 2 [mm]: 400
• Amort-süsteem: kaks toru
• Name: Gas shock absorber
• Quality class: PJ

Suspension: for vehicles without standard suspension, for vehicles without sports suspension, for vehicles with bad road version Lisainfo: "Tootja: SRL
OCTAVIA/GOLF IV
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
OCTAVIA/GOLF IV
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Suspension: for vehicles with standard suspension
• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Tagasild
• Amort-Ehitusliik: mitte vedrukandev amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Amort-süsteem: kaks toru
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW POLO/SKODA FABIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW POLO/SKODA FABIA
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: Silma all, ülemine tihvt
• Manufacturer: OYODO

• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Article number of recommended accessories: SMJ0132
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

Suspension: for vehicles with bad road version, for vehicles with standard suspension

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SM0132
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

Suspension: for vehicles with bad road version, for vehicles without standard suspension, for vehicles without sports suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Damper without Rebound Spring
• Shock Absorber System: Twin-Tube
• Name: Amort
• Manufacturer: MAX

Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-2424
• Name: AMORT
• Manufacturer: MAX

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694706
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Installatsiooni pool: Esisild
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Name: CFD 454345
• Manufacturer: DACO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version

• Suspension: for vehicles with bad road version
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Length 1 [mm]: 648
• Length 2 [mm]: 400
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA
• Lisainfo: MM-00030
• Additional information: MM-00030

Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• General Information: shock absorber; rear; gas
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Suspension: for vehicles with heavy duty suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.7
• Bore Diameter [mm]: 25
• Length 1 [mm]: 418
• Length 2 [mm]: 655
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK118, PK078
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE
• Additional information: 23890 MONROE
• Lisainfo: 23890 MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• for PR number: 1JA, K8B, K8D, K8G
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 633
• Length 2 [mm]: 396
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW

Suspension: for vehicles without heavy duty suspension, for vehicles with sports suspension SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY
• Additional information: 2001047 KAMOKA
• Lisainfo: 2001047 KAMOKA

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Article number of recommended accessories: 100 741 0111
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Length 1 [mm]: 632
• Length 2 [mm]: 385
• Manufacturer: DRIVE

• Suspension: for vehicles with heavy duty suspension
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Length 1 [mm]: 633
• Length 2 [mm]: 411
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Name: Amort
• Manufacturer: MAX

Suspension: for vehicles with bad road version, for vehicles without standard suspension, for vehicles without sports suspension

• Fitting Position: Rear Axle
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 4312G

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.6
• Bore Diameter [mm]: 25
• Length 1 [mm]: 420
• Length 2 [mm]: 631
• Piston Rod Diameter [mm]: 11
• Article number of recommended accessories: MK118, PK078
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Article number of recommended accessories: 100 741 0111
• Replace in pairs only:
• Name: Amort
• Manufacturer: MEY

• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Lisainfo: Suspension strut, complete, front
• Additional information: Suspension strut, complete, front

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: SMA0144, SMA0145
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA-AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Amorditüüp: Gaasirõhk
• Installatsiooni pool: Esisild
• Amort-Ehitusliik: Vedruamort
• Amort-kinnitusliik: ülemine tihvt
• Amort-süsteem: kaks toru
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A2/POLO/FABIA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A2/POLO/FABIA
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom eye
• General Information: shock absorber; rear; oil
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Vedruamort
• Amort-süsteem: kaks toru
• Amort-kinnitusliik: ülemine tihvt
• Manufacturer: OYODO

• Suspension: for vehicles with sports suspension
• Fitting Position: Right, Left, Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• max. length [mm]: 692
• min. length [mm]: 460
• Standpipe Diameter [mm]: 40
• Piston Rod Diameter [mm]: 12
• Piston Rod Thread: M10X100
• Name: SN SA95413.25
• Manufacturer: NTN-SNR

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
SKODA FABIA 02-
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Length 1 [mm]: 632
• Length 2 [mm]: 385
• Name: AMORT
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber System: Monotube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: KYB

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• for PR number: 1GG, G02, 1GA, G01, G05, G04, 1GB, G03, G06
• Block Separation:
• Fitting Position: Front Axle
• Shock Absorber Type: Oil Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Thread Size: M14x1,5
• Piston Rod Length [mm]: 212
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: AK-735004, AK-735410
• Suspension Strut Outer Diameter [mm]: 50
• Manufacturer: OPTIMAL ZAWIESZENIE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 100 640 0008, 100 412 2038/S, 100 412 2038
• Replace in pairs only:
• Name: AMORT
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SEOV27X213A
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!