• Operating Mode: Mechanical
• Number of pins: 4
• Left-/right-hand drive vehicles: for left-hand drive vehicles

• Quantity: 1
• Vehicle Identification Number (VIN) from: 6Y-74179 348, 6Y-7B454 577
• Mounting Type: Bolted
• Thread Size: M12 x 1,5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• General Information: switch for reversing light
• Manufacturer: VIKA

• Weight [kg]: 0.03
• Number of connectors: 2
• Required quantity: 1
• External Thread [mm]: M12 x 1,5
• Spanner Size: 22
• General Information: switch for reversing light
• Manufacturer: VIKA

• Fabrication Number: ECW-AU-002
• Manufacturer: NTY

• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 1
• Operating Mode: Electric
• Weight [kg]: 0.031
• Number of connectors: 4
• General Information: switch - brake light
• Manufacturer: VIKA

• Operating Mode: Manual (foot operated)
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV374

• Operating Mode: Manual (foot operated)
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV377

• Operating Mode: Mechanical
• Number of pins: 4
• Manufacturer: FAST

• Thread Size: M12x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Operating Mode: Electric
• General Information: switch - brake light
• Manufacturer: VIKA

• Operating Mode: Electric
• Number of pins: 4
• Fabrication Number: ECW-VW-000
• Manufacturer: NTY
• Name: NTY ECW-VW-000

• Operating Mode: Electric
• Weight [kg]: 0.031
• Number of connectors: 4
• General Information: switch - brake light
• Manufacturer: VIKA

• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.039
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Length [mm]: 22
• Thread Size: M12x1.5
• Operating Mode: Electric
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: FAST

• Engine Code: AZQ, BME
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Name: CE 38SKV812
• Manufacturer: ESEN SKV

• General Information: switch for reversing light
• Manufacturer: BORSEHUNG

• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Operating Mode: Mechanical
• Number of pins: 4
• Technical Information Number: circuit N.C., circuit N.O.
• Manufacturer: ERA

• Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of pins: 2
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: brown
• Manufacturer: FAE

• Operating Mode: Mechanical
• Number of pins: 2
• Manufacturer: FAST

• Length [mm]: 33.3
• Width [mm]: 28.9
• Fitting Position: Footwell
• Height [mm]: 95.85
• Required quantity: 1
• Operating Mode: Electric, Manual (foot operated), Mechanical
• Shape: angular
• Material: Plastic
• Mounting Type: Bayonet
• Alternatively:
• Number of pins: 4
• Combi Switch Function: Changeover Switch
• Rated Voltage [V]: 12
• Connector Shape: angular
• Observe the vehicle manufacturer specifications:
• Weight [kg]: 0.038
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: switch for reversing light
• Manufacturer: BORSEHUNG

• Quantity: 1
• Operating Mode: Electric
• Weight [kg]: 0.36
• Width [mm]: 33.55
• Height [mm]: 37.18
• Length [mm]: 82
• General Information: switch - brake light
• Manufacturer: VIKA

• Engine Code: AZQ
• Housing Colour: black
• Operating Mode: Mechanical
• Manufacturer: FACET

• new version:
• Housing Colour: black
• Number of connectors: 4
• Operating Mode: Electric
• Weight [kg]: 0.034
• for OE number: 6Q0 945 511
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Mechanical
• Number of connectors: 4
• Manufacturer: VERNET

• Engine Code: AZQ
• Housing Colour: black
• Operating Mode: Mechanical
• Name: EP 1.810.228
• Manufacturer: EPS

• Engine Code: AZQ
• Colour Coding: brown
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Operating Mode: Mechanical
• Supplementary Article/Info 2: with mounting manual
• Housing Colour: black
• Manufacturer: FAE

• Quantity: 1
• Operating Mode: Manual (foot operated)
• General Information: switch - brake light
• Manufacturer: BORSEHUNG

• Operating Mode: Mechanical
• Number of pins: 4
• Colour: black
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Shape: round
• Version: IAM
• Manufacturer: METZGER

• Engine Code: AZQ
• Colour Coding: brown
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: EP 1.860.266
• Manufacturer: EPS

• Length [mm]: 91.5
• Width [mm]: 33.2
• Height [mm]: 35.5
• Weight [kg]: 0.024
• Required quantity: 1
• Operating Mode: Electric, Manual (foot operated)
• Material: Plastic
• Mounting Type: Plug-in connection
• adjustable: adjustable
• Number of pins: 4
• Combi Switch Function: Changeover Switch
• Rated Voltage [V]: 12
• Observe the vehicle manufacturer specifications:
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• new version:
• Housing Colour: black
• Number of connectors: 4
• Operating Mode: Electric
• Weight [kg]: 0.034
• for OE number: 6Q0 945 511
• Observe service information:
• Name: SW 30 10 3650
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 4
• Combi Switch Function: Normally Open Contact
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• Name: HE 6DD010966691
• Manufacturer: HELLA

• Operating Mode: Mechanical
• Number of pins: 4
• for OE number: 6Q0945511
• Manufacturer: MEAT&DORIA

• Operating Mode: Mechanical
• Number of pins: 4
• Combi Switch Function: Normally Closed Contact, Normally Open Contact
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating Mode: Manual (foot operated)
• General Information: switch - brake light
• Manufacturer: BORSEHUNG

• Operating Mode: Mechanical
• Number of pins: 2
• for OE number: 7H0927189
• Manufacturer: MEAT&DORIA

• Colour: red
• Colour Code: 300
• General Information: hazard warning light switch
• Manufacturer: VIKA

• Transmission Type: Manual Transmission
• Length [mm]: 22
• Width [mm]: 22
• Height [mm]: 62
• Weight [kg]: 0.04
• Thread Size: M12 x 1,5
• Operating Mode: Electric
• Mounting Type: Bolted
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: with seal ring, without cable
• Housing Colour: black
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Light Function: with low beam
• Manufacturer: ABAKUS LORO

Combi Switch Function: with indicator function, with high beam function, with park light function General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• Number of pins: 10
• Guarantee: 3 years guarantee
• Weight [kg]: 0.19
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 38SKV504

Combi Switch Function: with wipe-wash function, with wipe interval function

• Voltage [V]: 12
• Light Function: with low beam, with high beam
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of pins: 11
• Combi Switch Function: with indicator function, with park light function
• Guarantee: 3 years guarantee
• Weight [kg]: 0.22
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 38SKV505

• Colour: black
• Number of pins: 10
• Combi Switch Function: with rear wiper function, with wipe-wash function
• Guarantee: 3 years guarantee
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Vehicle Equipment: for vehicles with airbag
• Number of connectors: 11
• Colour: black
• Weight [kg]: 0.159
• Manufacturer: FEBI

Combi Switch Function: with park light function, with indicator function, with high beam function General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Mechanical
• Number of pins: 4
• Colour: black
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Shape: round
• Version: OE
• Manufacturer: METZGER

• Colour: black
• Number of pins: 4
• Control Type: Tip Switch Control
• Fitting Position: Dashboard
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Colour: black
• Fabrication Number: EPE-VW-000
• Manufacturer: NTY
• Name: NTY EPE-VW-000

Combi Switch Function: with indicator function, with high beam function, with park light function

• Voltage [V]: 12
• Colour: black
• Light Function: with low beam, with high beam
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Number of pins: 17
• Guarantee: 3 years guarantee
• Weight [kg]: 0.26
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 38SKV512
• Manufacturer: ESEN SKV

Combi Switch Function: with indicator function, with cruise control, with park light function

• Colour: black
• Number of pins: 14
• Guarantee: 3 years guarantee
• Weight [kg]: 0.21
• Rated Voltage [V]: 12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

Combi Switch Function: with board computer function, with rear wipe-wash function, with wipe-wash function, with dynamic function (direction indicator), with wipe interval function

• Vehicle Equipment: for vehicles with airbag
• Number of connectors: 11
• Colour: black
• Weight [kg]: 0.159
• Name: SW 32 92 1320
• Manufacturer: SWAG

Combi Switch Function: with park light function, with indicator function, with high beam function General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without on-board computer
• Colour: black
• Material: Plastic
• Weight [kg]: 0.126
• Manufacturer: FEBI BILSTEIN

Combi Switch Function: with wipe-wash function, with rear wipe-wash function General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: black
• Weight [kg]: 0.166
• Manufacturer: VEMO

Vehicle Equipment: for vehicles with airbag, for vehicles without cruise control Combi Switch Function: with high beam function, with light dimmer function, with indicator function, with park light function General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Colour Code: 01 C
• Colour: black
• Vehicle Equipment: for vehicles without cruise control
• General Information: steering column switch
• Manufacturer: BORSEHUNG

Combi Switch Function: with high beam function, with light dimmer function, with indicator function, with park light function

• Quantity: 1
• General Information: turn signal switch
• Manufacturer: VIKA

• Vehicle Equipment: for vehicles without on-board computer
• Colour: black
• Material: Plastic
• Weight [kg]: 0.126
• Name: SW 30 91 8642
• Manufacturer: SWAG

Combi Switch Function: with wipe-wash function, with rear wipe-wash function General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with on-board computer
• Number of connectors: 6
• Colour: black
• Weight [kg]: 0.134
• Manufacturer: FEBI

Combi Switch Function: with board computer function, with wipe-wash function, with rear wipe-wash function General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Combi Switch Function: with wipe interval function
• Colour: black
• Number of pins: 14
• Manufacturer: FAST

• Colour: black
• Weight [kg]: 0.167
• Manufacturer: FEBI

Vehicle Equipment: for vehicles with airbag, for vehicles with cruise control Combi Switch Function: with indicator function, with cruise control, with high beam function, with park light function, with headlight flasher General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 17
• Combi Switch Function: with high beam function, with cruise control
• Light Function: with cornering light
• for OE number: 8L0953513J01C
• Manufacturer: MEAT & DORIA

• Colour: black
• Vehicle Equipment: for vehicles with cruise control
• Weight [kg]: 0.15
• Manufacturer: VEMO

Combi Switch Function: with wipe interval function, with board computer function General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Combi Switch Function: with light dimmer function, with headlight flasher
• Weight [kg]: 0.182
• Manufacturer: VEMO GERMANY

Vehicle Equipment: for vehicles with airbag, for vehicles with cruise control General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: black
• Number of pins: 17
• Manufacturer: ERA

Combi Switch Function: with indicator function, with cruise control, with high beam function

• Number of pins: 17
• Colour: black
• Combi Switch Function: with cruise control, with light dimmer function
• Name: MM DA50099
• Manufacturer: MAGNETI MARELLI

• Quantity: 1
• General Information: headlight flasher and parking light
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 6Y-5-236996
• Vehicle Equipment: for vehicles with headlight levelling (electric)
• Manufacturer: AIC

Light Function: for low beam, for outline marker light, for front fog light, for rear fog light General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.