Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Length [mm]: 136
-
External Thread Size: M12 x 1,
5 - Quality/ Grade: 10.9
- Spanner Size: 18
- Bolt Head-/Nut Design: Male Hex
- DIN/ISO: 989
- Surface: Oiled
- Screw length below head [mm]: 125
- Weight [kg]: 0.125
- Name: KRUVI
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Production date from: 01/
03 - Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 71.5
- Height 1 [mm]: 90
- Height 2 [mm]: 54.5
- for OE number: 6R0501541A
-
Name: Paigutus -
Kndmik VW T. BORA L/ P - Manufacturer: SAS
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Thickness [mm]: 90
- Weight [kg]: 0.31
-
Material: Rubber/
Metal - Required quantity: 2
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 72
- General Information: bonded rubber bush
- Manufacturer: VIKA
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 72
- Width [mm]: 90
- SVHC: No SVHC present!
-
Name: Kinnitus,
sillatala - Manufacturer: FAG
-
Fitting Position: Rear Axle,
both sides - Length [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 72
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 72
- Net weight [kg]: 0.39
-
Name: Paigutus -
Kndmik VW T. BORA 98- 05 L/ P 90*72MM - Manufacturer: NK
- Fitting Position: Rear
- Outer Diameter [mm]: 72
- Manufacturer: KAMOKA
- Installatsiooni pool: Tagasild
-
Siseläbimõõt [mm]: 12,
2 - Välisläbimõõt [mm]: 80
- Laius (mm): 90
- Name: ALT 83552AL
- Manufacturer: ALTE AUTOMOTIVE
- Diameter 4 [mm]: 72
- Installatsiooni pool: Pealis
-
Laagritüüp: Kummi-
metalllaager - Name: Suspension beam bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A3/VW GOLF IV
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A3/VW GOLF IV
(kvaliteediklass: PJ)"
- new version:
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 72
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.31
- Observe service information:
-
Name: Paigutus -
Kndmik VW T. BORA L/ P - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Outer Diameter [mm]: 71
- Weight [kg]: 0.314
- Fitting Position: Rear Axle
- Required quantity: 2
- Inner Diameter [mm]: 12
- Height [mm]: 90
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: TEDGUM
- Name: TG 00725767
- new version:
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 72
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.31
- Observe service information:
- Name: SW 30 93 1547
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Height [mm]: 90
- Weight [kg]: 0.315
- Inner Diameter [mm]: 12
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 315
- Outer Diameter 1 [mm]: 72
- Outer Diameter 2 [mm]: 78
- Manufacturer: METALCAUCHO
- Fitting Position: Rear Axle
- Required quantity: 2
-
Material: Rubber/
Metal - Weight [g]: 331
- Outer Diameter [mm]: 72
- Length [mm]: 90
- Name: IM 1711
- Manufacturer: ORIGINAL IMPERIUM
- not for PR number: 0N7
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 72
- Mounting Type: Rubber Mount
- Material: Plastic
- Required quantity: 2
- Quantity Unit: Piece
- replacement in pairs recommended:
-
Name: Paigutus -
Kndmik VW T. GOLF/ A3 - Manufacturer: MEY
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 72
- Quantity per axle: 2
- Observe service information:
-
Name: Paigutus -
Kndmik VW T. GOLF/ A3 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Quantity per packing unit: 2
- Diameter [mm]: 69
-
Material: Rubber/
Metal - Axle alignment required after fitting:
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 69
- Mounting Type: Hydro Mount
- Weight [kg]: 0.442
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 07.2004
-
Fitting Position: Rear,
Left, Right, Front, Lower - Manufacturer: HUTCHINSON
- Fitting Position: Rear Axle
- Mounting Type: Hydro Mount
- Outer Diameter [mm]: 69
- Width [mm]: 90
- SVHC: No SVHC present!
-
Name: Kinnitus,
sillatala - Manufacturer: FAG
- for PR number: 0N7
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 71
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Paigutus -
Kndmik SKODA T. FABIA/ PRAKTIK 99- L/ P - Manufacturer: MEY
- Suspension: for vehicles with heavy duty suspension
- for PR number: 0N7
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.4
-
Name: Paigutus -
Kndmik SKODA T. FABIA - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: with accessories
- Outer Diameter [mm]: 72
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Paigutus - Kndmik VW T. GOLF/A3 97- 72MM ZESTAW PLASTIK NAKR¨TKI
- Installatsiooni pool: Tagasild
- Siseläbimõõt [mm]: 12
- Välisläbimõõt [mm]: 69
- Laius (mm): 64
- Name: ALT 83545AL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: Rear Axle both sides
- General Information: repair kit for bonded rubber bush
- Manufacturer: VIKA
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - SVHC: No SVHC present!
-
Name: Remondikomplekt,
sillatala - Manufacturer: FAG
- not for PR number: 0N7
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 90
- Outer Diameter [mm]: 72
- replacement in pairs recommended:
- Required quantity: 2
- Manufacturer: MEY
Name: Paigutus - Kndmik VW T. GOLF/A3 97- 72MM ZESTAW 2 TULEJE RUBY
- for PR number: 0N7
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Height [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 71
- Supplementary Article/Supplementary Info: with accessories
- Quantity Unit: Set
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Paigutus -
Kndmik SKODA T. FABIA/ PRAKTIK 99- L/ P - Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Suspension: for vehicles with heavy duty suspension
- for PR number: 0N7
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.094
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with nuts
-
Name: REMONDIKOMPLEKT,
SILLATALA - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with heavy duty suspension
- for PR number: 0N7
- Thickness [mm]: 90
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.094
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with nuts
- Name: SW 30 93 1744
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: inner,
Front Axle Right, Lower - Required quantity: 1
-
Name: Laagripukk,
sillatala - Manufacturer: TRI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks