• Thickness [mm]: 4
• Inner Diameter [mm]: 32
• Colour: black
• Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.001
• Name: RONGASTIHEND,JAHUTUSVEDELIKU TORUSTIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 25
• Thickness [mm]: 3.65
• Weight [kg]: 0.001
• Inner Diameter [mm]: 19.6
• Manufacturer: METALCAUCHO

• Inner Diameter [mm]: 32
• Thickness [mm]: 4
• Material: NBR (nitrile butadiene rubber)
• Manufacturer: METZGER

• Quantity per packing unit: 25
• Inner Diameter [mm]: 20.5
• Outer Diameter [mm]: 26.5
• Thickness [mm]: 5.5
• Manufacturer: ELRING

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• General Information: o-ring
• Manufacturer: BORSEHUNG

• Fabrication Number: CTM-VW-068
• Manufacturer: NTY

• Cooling Hose: from distributor to auxiliary water pump
• Weight [kg]: 0.045
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BJB, BKC, BXE
• Forward- /Backflow: for backflow
• Cooling Hose: from oil cooler to water pipe
• Manufacturer: JP GROUP
• Lisainfo: Radiator Hose
• Additional information: Radiator Hose

• Observe system fill quantity:
• Hose Type: Moulded Hose
• Overall Length [mm]: 200
• Cooling Hose: from oil cooler to water pipe
• Manufacturer: TOPRAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: METALCAUCHO

• Fitting Position: Radiator, Lower
• Supplementary Article/Info 2: without sensor
• Fabrication Number: CTM-VW-041
• Manufacturer: NTY

• Forward- /Backflow: for backflow
• Cooling Hose: from oil cooler to water pipe
• Manufacturer: METALCAUCHO

• Engine Code: BJB, BKC, BXE
• Vehicle Equipment: for vehicles with parking heater
• Shape: T Shape (T Piece)
• Number of connectors: 3
• Material: Plastic
• for OE number: N90760601
• Outer Diameter of Connection [mm]: 20
• Manufacturer: METZGER

• Engine Code: BJB, BKC, BXE
• Cooling Hose: from connecting pipe to oil cooler
• Manufacturer: JP GROUP
• Lisainfo: Radiator Hose
• Additional information: Radiator Hose

• Fabrication Number: CPP-VW-014
• Cooling Hose: from EGR cooler to flange
• Manufacturer: NTY

• Fitting Position: Upper
• Engine Code: BLS
• for OE number: 1K0121101CE
• Colour: black
• Hose Length [mm]: 495
• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 31
• Observe broschure:
• Name: Jahutusvoolik
• Manufacturer: GAT

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Fitting Position: Upper
• Engine Code: BLS
• for OE number: 1K0121101CF
• Colour: black
• Hose Length [mm]: 440
• Inner Diameter 1 [mm]: 30.5
• Inner Diameter 2 [mm]: 30.5
• Observe broschure:
• Name: Jahutusvoolik
• Manufacturer: GAT

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Engine Code: BJB, BKC, BXE
• Cooling Hose: from water pipe to oil cooler
• Guarantee: 3 years guarantee
• Weight [kg]: 0.17
• Height 1 [mm]: 60
• Colour: black
• Length 1 [mm]: 392
• Width 1 [mm]: 116
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV351
• Manufacturer: ESEN SKV

• Material: Rubber
• Weight [g]: 66
• Length [mm]: 283
• Name: Jahutusvoolik
• Manufacturer: IMP

• General Information: coolant hose
• Manufacturer: VIKA

• Inner Diameter [mm]: 31
• Cooling Hose: from radiator to water pipe
• Fitting Position: Upper
• Weight [kg]: 0.229
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Observe system fill quantity:
• Forward- /Backflow: for foreflow
• Hose Type: Moulded Hose
• Material: Rubber with fabric lining
• Cooling Hose: from engine to oil cooler
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter [mm]: 31
• Cooling Hose: from distributor to engine cooler
• Fitting Position: Upper
• Weight [kg]: 0.227
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Upper
• Engine Code: BLS
• for OE number: 1K0121101CG
• Colour: black
• Hose Length [mm]: 448
• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 31
• Observe broschure:
• Name: Jahutusvoolik
• Manufacturer: GAT

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Inner Diameter [mm]: 30.5
• Cooling Hose: from distributor to engine cooler
• Weight [kg]: 0.272
• Name: SW 33 10 2180
• Manufacturer: SWAG

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1K0 121 086 AN
• Manufacturer: KAMOKA

• Fitting Position: Lower
• Engine Code: BLS
• Colour: black
• Hose Length [mm]: 805
• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 31
• Observe broschure:
• Name: Jahutusvoolik
• Manufacturer: GAT

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• for OE number: 1K0121101CF
• Fitting Position: Upper
• Weight [g]: 232
• Length [mm]: 373
• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 31
• Name: Jahutusvoolik
• Manufacturer: IMP

• Engine Code: BKC, BXE, BJB
• Cooling Hose: from engine to engine cooler
• Outer Diameter 1 [mm]: 38
• Inner Diameter 1 [mm]: 30
• Outer Diameter [mm]: 38
• Inner Diameter [mm]: 30
• Name: Jahutusvoolik
• Manufacturer: MAX

• Fitting Position: Lower
• Engine Code: BJB, BKC, BXE
• Colour: black
• Hose Length [mm]: 770
• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 31
• Observe broschure:
• Name: Jahutusvoolik
• Manufacturer: GAT

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• General Information: coolant hose
• Manufacturer: VIKA

• Transmission Type: Manual Transmission
• Engine Code: BKC, BJB, BXE
• Manufacturer: JP GROUP A/S
• Lisainfo: Radiator Hose
• Additional information: Radiator Hose

• Cooling Hose: from connecting pipe to engine cooler
• Fitting Position: Lower Left
• for OE number: 1K0121086AN
• Manufacturer: SASIC
• Lisainfo: 3406110 SAS
• Additional information: 3406110 SAS

• Weight [g]: 138
• Cooling Hose: from connecting pipe to expansion tank
• Manufacturer: METALCAUCHO

• Fabrication Number: CPP-VW-018
• Manufacturer: NTY

• Engine Code: BLS
• Transmission Type: Manual Transmission
• Number of inlets/outlets: 4
• Manufacturer: METZGER

Cooling Hose: Piping to oil cooler, from oil cooler to engine block

• Fitting Position: Lower
• Weight [kg]: 0.356
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Upper
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 31
• Guarantee: 3 years guarantee
• Weight [kg]: 0.5
• Colour: black
• Hose Length [mm]: 770
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV353
• Manufacturer: ESEN SKV

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Cooling Hose: from expansion tank to engine cooler
• for OE number: 1K0122447BS
• Manufacturer: SASIC

• for OE number: 3C0122157FC
• Weight [g]: 146
• Length [mm]: 224
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 19
• Name: IM 221123
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower, Exhaust Side
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Cooling Hose: from engine to engine cooler
• Manufacturer: TOPRAN HANS PRIES

Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BKC, BXE, BJB
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 38
• Cooling Hose: from engine to engine cooler
• Fitting Position: Lower
• Outer Diameter 1 [mm]: 38
• Inner Diameter 1 [mm]: 30
• Weight [kg]: 0.37
• Name: JAHUTUSVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Metal
• Required quantity: 1
• Name: Jahutusvedeliku torustik
• Manufacturer: MAX

• Engine Code: BLS, BKC, BJB
• Transmission Type: Manual Transmission
• Block Separation:
• Cooling Hose: from distributor to engine cooler
• Outer Diameter [mm]: 39
• Name: Jahutusvoolik
• Manufacturer: MAX

• Engine Code: BLS
• Transmission Type: Automatic Transmission
• Block Separation:
• Climate Zones: for cold climate zones, for moderate climate zones
• Cooling Hose: Input, radiator
• Fitting Position: Upper Left
• Manufacturer: METZGER

Vehicle Equipment: for vehicles without air conditioning, for vehicles with air conditioning Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Fitting Position: Lower Left
• Weight [g]: 500
• Length [mm]: 644
• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 31
• Name: Jahutusvoolik
• Manufacturer: IMP

• Fitting Position: Upper
• Transmission Type: Manual Transmission
• Engine Code: BJB, BKC, BXE
• Colour: black
• Hose Length [mm]: 575
• Inner Diameter 1 [mm]: 33.5
• Inner Diameter 2 [mm]: 30
• Observe broschure:
• Name: Jahutusvoolik
• Manufacturer: GAT

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Cooling Hose: from distributor to engine cooler
• Inner Diameter [mm]: 31
• Name: Jahutusvoolik
• Manufacturer: MAX

• Transmission Type: Manual Transmission
• Fitting Position: Upper Left
• Observe system fill quantity:
• Hose Type: Moulded Hose
• Supplementary Article/Supplementary Info: with quick coupling
• Supplementary Article/Info 2: with clip, with seal ring
• Material: Rubber with fabric lining
• Cooling Hose: from distributor to engine cooler
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cooling Hose: from engine cooler to water pump
• Fitting Position: Lower Left
• Number of inlets/outlets: 2
• Manufacturer: METZGER

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Inner Diameter [mm]: 31
• Cooling Hose: from distributor to engine cooler
• Fitting Position: Lower
• Weight [kg]: 0.399
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Iron
• General Information: coolant pipe; iron
• Manufacturer: VIKA

• Material: Plastic
• General Information: coolant pipe; plastic
• Manufacturer: VIKA

• Engine Code: BLS, BKC, BJB
• Transmission Type: Manual Transmission
• Block Separation:
• Outer Diameter [mm]: 39
• Cooling Hose: from distributor to engine cooler
• Fitting Position: Upper
• Weight [kg]: 0.33
• Supplementary Article/Supplementary Info: with quick coupling
• Name: JAHUTUSVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 31
• Cooling Hose: from engine to engine cooler
• Fitting Position: Upper
• Weight [kg]: 0.276
• Supplementary Article/Supplementary Info: with quick coupling
• Manufacturer: FEBI

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower
• Weight [kg]: 0.54
• Weight [g]: 540
• Manufacturer: METALCAUCHO

• Guarantee: 3 years guarantee
• Weight [kg]: 0.4
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 43SKV756

• General Information: coolant pipe; iron
• Manufacturer: VIKA

• General Information: coolant pipe; iron
• Manufacturer: VIKA

• Cooling Hose: from connecting pipe to engine cooler
• Fitting Position: Upper Right
• for OE number: 1K0122101BQ
• Name: JAHUTUSVOOLIK
• Manufacturer: SAS

• for OE number: 03G121065AA
• Weight [g]: 470
• Name: IM 230197
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 1K0121156AF
• Fitting Position: Upper Left
• Material: Rubber
• Supplementary Article/Supplementary Info: with pipe socket
• Weight [g]: 410
• Length [mm]: 439
• Inner Diameter 1 [mm]: 41
• Inner Diameter 2 [mm]: 30
• Name: Jahutusvoolik
• Manufacturer: IMP

• Fitting Position: Upper
• Transmission Type: Automatic Transmission
• Engine Code: BJB, BKC, BXE
• Colour: black
• Hose Length [mm]: 403
• Inner Diameter 1 [mm]: 32
• Inner Diameter 2 [mm]: 31.5
• Observe broschure:
• Manufacturer: GATES

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Weight [kg]: 0.48
• Weight [g]: 480
• Manufacturer: METALCAUCHO

• Name: Jahutusvedeliku torustik
• Manufacturer: MAX

• Transmission Type: Manual Transmission
• Cooling Hose: from distributor to engine cooler
• Fitting Position: Upper Left
• Manufacturer: METZGER

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Engine Code: BLS
• Required quantity: 1
• Material: Metal
• Manufacturer: METALCAUCHO

• for OE number: 038121065CS
• Weight [g]: 469
• Name: IM 80439
• Manufacturer: ORIGINAL IMPERIUM