Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Lisainfo: VAG summutitripp
- Fitting Position: Catalytic Converter
-
Materjal: Kumm/
metall -
Lisainfo: Holder,
exhaust system -
Additional information: Holder,
exhaust system
- Weight [kg]: 0.049
- Manufacturer: 3RG
Lisainfo: VAG summutitripp
- Exhaust System: for centre muffler
- Required quantity: 2
- Materjal: Kumm
-
Name: KINNITUS,
VLJALASKESSTEEM - Manufacturer: FIS
- Exhaust System: for rear muffler
- Materjal: Kumm
-
Name: KINNITUS,
VLJALASKESSTEEM - Manufacturer: FIS
- Exhaust System: for front muffler
- Fitting Position: Front
- Required quantity: 2
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) -
Name: KINNITUS,
VLJALASKESSTEEM - Manufacturer: FIS
- Exhaust System: for front muffler
- Fitting Position: Rear
-
Kaal (kg): 0,
09 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- OE-numbri jaoks: 1K0253147C
- vajaminev tükihulk: 1
- Kaal (g): 63
- Name: IM 37425
- Manufacturer: ORIGINAL IMPERIUM
- Exhaust System: for front muffler
- Fitting Position: Rear
- Materjal: Kumm
-
Name: KINNITUS,
VLJALASKESSTEEM - Manufacturer: FIS
- Exhaust System: for front muffler
- Fitting Position: Rear
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Manufacturer: FISCHER
- Exhaust System: for rear muffler
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) -
Name: Kinnitus,
vljalaskessteem - Manufacturer: FIS
- Exhaust System: for front muffler
- Fitting Position: Front
- Required quantity: 2
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) -
Name: WIESZAK TUMIKA VW GOLF5/
A3 - Manufacturer: MAX
- Exhaust System: for front muffler
- Fitting Position: Front
- Required quantity: 2
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) -
Kaal (kg): 0,
054 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- OE-numbri jaoks: 6Q0 253 147
- varustus erinev OE st:
- Materjal: Kumm
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Muffler
- Materjal: Kumm
-
Kaal (kg): 0,
087 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kaal (g): 120
- Name: IM 37271
- Manufacturer: ORIGINAL IMPERIUM
- Väljalaskesüsteem: lõppsummuti jaoks
-
Kaal (kg): 0,
125 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Kaal (kg): 0,
297 - Üldine informatsioon: bracket for silencer
- Manufacturer: BORSEHUNG
- Exhaust System: for catalytic converter
-
Kaal (kg): 0,
347 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Exhaust System: for catalytic converter
-
Materjal: Kumm/
metall -
Name: KINNITUS,
VLJALASKESSTEEM - Manufacturer: FIS
-
Name: KINNITUS,
VLJALASKESSTEEM - Manufacturer: FIS
- Üldine informatsioon: bracket for silencer
- Manufacturer: BORSEHUNG
- Additional information: 1K0253144AE BOR
- Lisainfo: 1K0253144AE BOR
- Exhaust System: for catalytic converter
- Manufacturer: FISCHER
Materjal: EPDM (Etüleen-Propüleen-Dieen-Kautsuk), Kumm/metall
- Exhaust System: for catalytic converter
-
Materjal: Kumm/
metall - Manufacturer: DRIVE
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) -
Name: Kinnitus,
vljalaskessteem - Manufacturer: FIS
-
Engine Code: CCSA,
BGU, BSF, BSE - Block Separation:
-
Materjal: Kumm/
metall - Installatsiooni pool: Katalüsaator
-
Kaal (kg): 0,
308 - Manufacturer: FEBI BILSTEIN
Vehicle Identification Number (VIN) to: ******1Z*7A151668, ******1Z*72292336, ******1Z*78093783 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Kaal (kg): 0,
681 - vajaminev tükihulk: 1
- Piirangutega toode/piirangu info: koos hoidjaga
- Üldine informatsioon: bracket for silencer
- Manufacturer: BORSEHUNG
- for article number: 28592
- Pikkus (mm): 35
- Laius (mm): 50
- Kõrgus (mm): 285
-
Kaal (kg): 0,
2 - Tunnustäht: 23
- Manufacturer: WALKER
-
Name: Kinnitus,
vljalaskessteem - Manufacturer: MAX
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks