Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Height [mm]: 160
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Vehicle Identification Number (VIN) to: 1Z-
62261 242, 1Z- 68086 262, 1Z- 6A151 261 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Thermoplast
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Protective Cap/
Bellow, shock absorber -
Additional information: Protective Cap/
Bellow, shock absorber
-
Vehicle Identification Number (VIN) from: 1Z-
62261243, 1Z- 68086263, 1Z- 6A151262, 1Z- 7B150010 - Fitting Position: Rear Axle
- Material: Thermoplast
- Height [mm]: 180
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. GOLF/TOURA
- Fitting Position: Rear Axle
- Height [mm]: 160
- Required quantity: 2
-
Name: Kaitsekaan/
kaitsekumm - Vedrustus/ amordid VW T. - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: AB-
VW- 009 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Height [mm]: 206
- Manufacturer: MAX
-
Lisainfo: 72-
2185 -
Additional information: 72-
2185
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF
- Fitting Position: Front Axle
- Bellows Material: Thermoplast
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF
- Construction Year to: 04.2006
- Fitting Position: Rear Axle
- Height [mm]: 180
- Material: Thermoplast
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Length [mm]: 178
-
Inner Diameter [mm]: 36,
53 - Fitting Position: Rear Axle
- Shape: round
- Weight [kg]: 0.05
- Manufacturer: FEB
Vehicle Identification Number (VIN) from: ******1Z*6A151262, ******1Z*62261243, ******1Z*68086263, ******1Z*7B150010 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. A3 03- LE/PR
- Length [mm]: 181
- Material: Thermoplast
- Fitting Position: Rear Axle
- Shape: oval
- Weight [kg]: 0.045
-
Name: KAITSEMTS/
KAITSEKUMM, AMORT - Manufacturer: FEB
Vehicle Identification Number (VIN) to: ******1Z*6A151261, ******1Z*62261242, ******1Z*68086262 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Height [mm]: 160
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid SKODA T OCTAVIA
- Fitting Position: Rear Axle
- Height [mm]: 179
- SVHC: No SVHC present!
- Name: LU 810012610
- Manufacturer: FAG
-
Production date from: 06/
04 -
Production date to: 10/
08 - Mounting Type: Rubber Mount
- Fitting Position: Front Axle
- Height [mm]: 206
- for OE number: 6N0413175A
- Manufacturer: SASIC
- Fitting Position: Front Axle
- Weight [kg]: 0.07
- Material: Thermoplast
- Required quantity: 2
-
Outer Diameter [mm]: 68,
80 - General Information: protective pipe; front
- Manufacturer: VIKA
- Length [mm]: 178
-
Inner Diameter [mm]: 36,
53 - Fitting Position: Rear Axle
- Shape: round
- Weight [kg]: 0.05
- Name: SW 30 93 8657
- Manufacturer: SWAG
Vehicle Identification Number (VIN) from: ******1Z*6A151262, ******1Z*62261243, ******1Z*68086263, ******1Z*7B150010 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 181
- Material: Thermoplast
- Fitting Position: Rear Axle
- Shape: oval
- Weight [kg]: 0.045
- Name: SW 32 93 9248
- Manufacturer: SWAG
Vehicle Identification Number (VIN) to: ******1Z*6A151261, ******1Z*62261242, ******1Z*68086262 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1K0513425
- Fitting Position: Rear Axle
- Height [mm]: 179
- Material: Thermoplast
- Weight [g]: 46
- Diameter 1 [mm]: 49
- Diameter 2 [mm]: 52
- Name: IM 32493
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 6N0413175A
- Fitting Position: Front Axle
- Height [mm]: 193
- Material: Thermoplast
- Weight [g]: 68
- Diameter 1 [mm]: 63.6
- Diameter 2 [mm]: 74
- Name: IM 37485
- Manufacturer: ORIGINAL IMPERIUM
- Required quantity: 2
- Inner Diameter 2 [mm]: 72
- Height [mm]: 198
- Fitting Position: Front Axle
- Weight [kg]: 0.07
- Inner Diameter 1 [mm]: 63
- Manufacturer: TEDGUM
-
Outer Diameter [mm]: 68,
80 - Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.07
-
Name: Kaitsemts/
kaitsekumm, amort - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Height [mm]: 206
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A2/A3/GOLF
- for combined PR number: G07+K8D
- Fitting Position: Front Axle
- Weight [kg]: 0.108
- Packaging length [cm]: 19
- Packaging width [cm]: 7.8
- Packaging height [cm]: 7.8
- Height [mm]: 200
- Manufacturer: FEBEST
- for OE number: 1K0513425D
- Fitting Position: Rear Axle
- Height [mm]: 178
- Material: Thermoplast
- Weight [g]: 61
- Diameter 1 [mm]: 36
- Diameter 2 [mm]: 53
- Name: IM 35130
- Manufacturer: ORIGINAL IMPERIUM
-
Outer Diameter [mm]: 68,
80 - Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.07
- Name: SW 30 93 6006
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Material: Thermoplast
- Manufacturer: FAST
- Suspension: for vehicles without sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Manufacturer: KAMOKA AMORTYZATORY
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Name: GH 339953
-
Manufacturer: AUTO-
GH
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
- Construction Year to: 02.2013
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: ASHIKA
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - max. length [mm]: 593
-
Shock Absorber Design: Spring-
bearing Damper - Name: CFD 564773
- Manufacturer: DACO
- Construction Year to: 02.2013
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: DACO GERMANY
Suspension: for vehicles without sports suspension, for vehicles without bad road version
-
Fabrication Number: A-
AU- 017 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Observe technical data:
- Manufacturer: NTY
-
Name: NTY A-
AU- 017
- Construction Year to: 02.2013
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Manufacturer: KAVO
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Vehicle Equipment: for vehicles without level control
-
Shock Absorber System: Twin-
Tube - Name: Gas shock absorber
- Quality class: PJ
Suspension: for vehicles with bad road version, for vehicles with sports suspension, for vehicles with standard suspension
Lisainfo: "Tootja: SRL
AUDI/SEAT/VW
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI/SEAT/VW
(kvaliteediklass: PJ)"
- Suspension: for vehicles with standard suspension
- Check OE number:
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Damper without Rebound Spring
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: 72-
2504 - Name: AMORT
- Manufacturer: MAX
- Construction Year to: 02.2013
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Lisainfo: Shock Absorber
- Additional information: Shock Absorber
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
-
Manufacturer: ASHIKA-
AMORTYZATORY
- Suspension: for vehicles without heavy duty suspension
-
for PR number: G02,
L06, L07 - Fitting Position: Front Axle
- Quantity per packing unit: 2
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 54
- Length 1 [mm]: 525
- Length 2 [mm]: 378
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW
- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Manufacturer: KAMOKA AMORTYZATORY
- Additional information: 2000377 KAMOKA
- Lisainfo: 2000377 KAMOKA
- Suspension: for vehicles without sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Manufacturer: KAMOKA
- Construction Year to: 02.2013
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: JPA
- Construction Year to: 02.2013
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Piston Rod Diameter [mm]: 25
- Manufacturer: DACO GERMANY
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Construction Year to: 02.2013
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 50
- Name: AMORT
- Manufacturer: MAX
-
Lisainfo: ELS11-
0356 -
Additional information: ELS11-
0356
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Construction Year to: 02.2013
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Piston Rod Diameter [mm]: 22
- Name: CFD 454720
- Manufacturer: DACO
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Construction Year to: 02.2013
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 50
- Piston Rod Diameter [mm]: 22
- Manufacturer: ASHIKA
-
Lisainfo: MA-
00492 -
Additional information: MA-
00492
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
-
Shock Absorber System: Twin-
Tube - Housing diameter in clamping area [mm]: 50
- Manufacturer: DENCKERMANN AMORTYZATORY
-
Fitting Position: Front Axle Left,
Front Axle Right - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Fabrication Number: A-
AU- 016 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - General Information: shock absorber; rear; gas
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Fabrication Number: A-
VW- 014
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694702 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Suspension Strut Outer Diameter [mm]: 50
- Name: GH 359962
-
Manufacturer: AUTO-
GH
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Suspension Strut Outer Diameter [mm]: 55
- Name: GH 359961
-
Manufacturer: AUTO-
GH
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Clamp,
Top pin - Suspension Strut Outer Diameter [mm]: 55
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: 72-
1200 - Name: AMORT
- Manufacturer: MAX
Suspension: for vehicles with standard suspension, for vehicles with bad road version
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Clamp,
Top pin - Manufacturer: DRIVE
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
-
Shock Absorber System: Twin-
Tube - Housing diameter in clamping area [mm]: 55
- Manufacturer: DENCKERMANN AMORTYZATORY
for OE number: 1T0 413 031 CC, 1T0 413 031 CJ, 1T0 413 031 CS, 1T0 413 031 DL, 1T0 413 031 DN, 1T0 413 031 DP, 1T0 413 031 DR, 1T0 413 031 FK, 1T0 413 031 FL, 1T0 413 031 FM, 1T0 413 031 GH, 1T0 413 031 HK, 1T0 413 031 HL, 1T0 413 031 HM, 1T0 413 031 HN, 1T0 413 031 HP, 1T0 413 031 JD, 3AA 413 031 M, 3C0 413 031 AT
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Bottom Pin
-
Shock Absorber System: Twin-
Tube - Housing diameter in clamping area [mm]: 55
- Manufacturer: DENCKERMANN AMORTYZATORY
for OE number: 1T0 413 031 CK, 1T0 413 031 CL, 1T0 413 031 CM, 1T0 413 031 CN, 1T0 413 031 DS, 1T0 413 031 FD, 1T0 413 031 FN
-
for PR number: 1JC,
1JS - Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Length 1 [mm]: 585
- Length 2 [mm]: 369
- Quantity per axle: 1
- Manufacturer: TRW
Suspension: for vehicles without heavy duty suspension, for vehicles with sports suspension
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin
- for OE number: 1K0 413 031
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Suspension: for vehicles with heavy duty suspension
- Quantity per packing unit: 2
- Quantity per axle: 1
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Length 1 [mm]: 585
- Length 2 [mm]: 369
- Supplementary Article/Supplementary Info: without accessories
- Weight [kg]: 3.04
- Observe technical data:
- Manufacturer: TRW
- Construction Year to: 02.2013
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 50
- Piston Rod Diameter [mm]: 22
- Manufacturer: JAPKO
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Housing Diameter [mm]: 55
- Manufacturer: OYODO
- Fitting Position: Rear Axle
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Spring Type: for vehicles with coil spring suspension
- Name: MM 4320G
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Length [mm]: 338
- Manufacturer: DRIVE
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Shock Absorber Design: Suspension Strut
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 55
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Construction Year to: 02.2013
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: JP GROUP
- Lisainfo: Shock Absorber
- Additional information: Shock Absorber
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 1.7
- Bore Diameter [mm]: 30
- Length 1 [mm]: 370
- Length 2 [mm]: 593
-
Piston Rod Diameter [mm]: 12.4,
13 - Observe service information:
-
Article number of recommended accessories: MK203,
PK078 - Packaging length [cm]: 50.5
- Packaging width [cm]: 6.4
- Packaging height [cm]: 6.4
- Manufacturer: MONROE
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Diameter [mm]: 39
- Length 1 [mm]: 585
- Length 2 [mm]: 348
- Piston Rod Diameter [mm]: 12
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW
Suspension: for vehicles without sports suspension, for vehicles with sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Replace in pairs only:
- Name: AMORT
- Manufacturer: MEY
- Lisainfo: 1267250024
- Additional information: 1267250024
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin - Mounting points diameter [mm]: 50
-
Shock Absorber System: Twin-
Tube - Name: Gas shock absorber
- Quality class: PJ
Suspension: for vehicles with bad road version, for vehicles with standard suspension
Lisainfo: "Tootja: SRL
VW/SEAT/AUDI
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW/SEAT/AUDI
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 50
- Piston Rod Diameter [mm]: 22
- Name: BM SA0412
- Manufacturer: BREMSI
- Suspension: for vehicles with sports suspension
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin - Suspension Strut Outer Diameter [mm]: 55
-
Shock Absorber System: Twin-
Tube - Quality class: PJ
- Name: Gas shock absorber
- Construction Year to: 02.2013
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Diameter 1/Diameter 2 [mm]: 25/
55 - Article number of recommended accessories: SMA0148
- Shock Absorber Mounting Type: Top pin
- Manufacturer: ASHIKA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Manufacturer: JP GROUP
- Lisainfo: Shock Absorber
- Additional information: Shock Absorber
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin
- for OE number: 561413031
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Length [mm]: 338
- Name: AMORT
- Manufacturer: KYB
- Additional information: 344459
- Lisainfo: 344459
Suspension: for vehicles with standard suspension, for vehicles with sports suspension General Information: Please refer to the technical drawing in "Documents"
- Construction Year to: 02.2013
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 50
- Piston Rod Diameter [mm]: 22
- Name: AMORT
- Manufacturer: JPA
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
-
Diameter [mm]: 22,
50 - Manufacturer: KAVO PARTS
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Diameter 1 [mm]: 22
- Diameter 2 [mm]: 5
- Spring Type: for vehicles with coil spring suspension
- Name: AMORT
- Manufacturer: MAG
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Diameter 1 [mm]: 25
- Diameter 2 [mm]: 55
- Spring Type: for vehicles with coil spring suspension
- Name: MM 4319G
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle
- Construction Year from: 04.2007
- Suspension: for vehicles with sports suspension
- Vehicle Identification Number (VIN) from: 1Z7A152977
-
for PR number: L59,
L62, L63, G07 - Quantity per packing unit: 2
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 55
- Length 1 [mm]: 560
- Length 2 [mm]: 367
- Piston Rod Diameter [mm]: 24
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW
- Additional information: JGM1030T
- Lisainfo: JGM1030T
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 55
- Piston Rod Diameter [mm]: 25
- Name: BM SA0019
- Manufacturer: BREMSI
- Construction Year to: 02.2013
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Diameter 1/Diameter 2 [mm]: 25/
55 - Article number of recommended accessories: SM0148
- Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: JPA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
-
Diameter [mm]: 25,
54 - Manufacturer: KAVO
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 100 640 0007,
100 412 2039/ S, 100 412 2039 - Replace in pairs only:
- Name: AMORT
- Manufacturer: MEY
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - General Information: shock absorber; front; gas
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 4
- Bore Diameter [mm]: 32
- Observe technical data:
- Length 1 [mm]: 391
- Length 2 [mm]: 553
- Piston Rod Diameter [mm]: 22
-
Article number of recommended accessories: MK194,
PK163 - Packaging length [cm]: 51.5
- Packaging width [cm]: 16.2
- Packaging height [cm]: 16.2
- Housing diameter in clamping area [mm]: 50
- Manufacturer: MONROE
Guarantee: 5 years guarantee with accessories when replaced in pairs
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
-
for PR number: L03,
L10, L55, L74, L75, L58, L59, L62, G02 - Quantity per packing unit: 2
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 50
- Length 1 [mm]: 560
- Length 2 [mm]: 389
- Piston Rod Diameter [mm]: 22
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 100 640 0007,
100 412 2039/ S, 100 412 2039 - Replace in pairs only:
- Name: AMORT
- Manufacturer: MEY
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Check OE number:
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Parameter: SEOV30/
13X212A - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: SAA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - General Information: shock absorber; front; gas
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 50
- Piston Rod Diameter [mm]: 22
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version Technical Information: Please refer to the technical drawing in "Documents"
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 55
- Piston Rod Diameter [mm]: 25
- Name: AMORT
- Manufacturer: KYB
- Additional information: KYB335808
- Lisainfo: KYB335808
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version Technical Information: Please refer to the technical drawing in "Documents"
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- max. length [mm]: 562
- min. length [mm]: 390
- Standpipe Diameter [mm]: 55
- Piston Rod Diameter [mm]: 25
- Piston Rod Thread: M14X150
- Name: SN SA65443.21
- Manufacturer: SNR
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- reinforced version:
- Check OE number:
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Parameter: SEOV30/
13X219A - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: SAA
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - General Information: shock absorber; front; gas
- Manufacturer: VIKA
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Vehicle Equipment: for vehicles without level control
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: BIL
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version
Additional information: "Tootja: BILSTEIN
AUDI A3 (8P1)
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI A3 (8P1)
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Check OE number:
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SFE36/
25X156A - Housing Diameter [mm]: 55
- Shock Absorber Mounting Type: Top pin
- Name: Amort
- Manufacturer: SAA
for OE number: 1T0 413 031 CK, 1T0 413 031 CL, 1T0 413 031 CM, 1T0 413 031 CN, 1T0 413 031 DS, 1T0 413 031 FD, 1T0 413 031 FN
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: ST32/
22XA - Shock Absorber Mounting Type: Top pin
- Housing Diameter [mm]: 50
- Name: AMORT
- Manufacturer: SAA
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin - Suspension Strut Outer Diameter [mm]: 50
-
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
-
Name: BI 22-
139184 - Quality class: Q
Additional information: "Tootja: BILSTEIN
AUDI A3/VW GOLF V
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI A3/VW GOLF V
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin - Suspension Strut Outer Diameter [mm]: 50
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: BIL
- Quality class: Q
Suspension: for vehicles with standard suspension, for vehicles with bad road version
Lisainfo: "Tootja: BILSTEIN
AUDI/VW/SKODA/SEAT
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Check OE number:
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: SFE36/
25X164A - Housing Diameter [mm]: 55
- Shock Absorber Mounting Type: Top pin
- Name: Amort
- Manufacturer: SAA
for OE number: 1T0 413 031 CC, 1T0 413 031 CS, 1T0 413 031 DR, 1T0 413 031 FK, 1T0 413 031 FL, 1T0 413 031 HK, 1T0 413 031 HL, 1T0 413 031 HM, 1T0 413 031 HN, 1T0 413 031 HP, 1T0 413 031 JD, 3AA 413 031 M, 3C0 413 031 AT
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin -
Parameter: 146/
64 - Suspension Strut Outer Diameter [mm]: 55
-
Shock Absorber System: Twin-
Tube - Name: Amort
- Manufacturer: BIL
Suspension: for vehicles with standard suspension, for vehicles with bad road version
Additional information: "Tootja: BILSTEIN
AUDI/VW/SKODA/SEAT
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI/VW/SKODA/SEAT
(kvaliteediklass: Q)"
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom Plate,
Top pin - Suspension Strut Outer Diameter [mm]: 55
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: BIL
- Quality class: Q
Additional information: "Tootja: BILSTEIN
AUDI A3/VW GOLF V
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI A3/VW GOLF V
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
General Information: gas-
filled shock absorber; rear - Manufacturer: BORSEHUNG
- Name: Gas shock absorber
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
General Information: gas-
filled shock absorber; front - Manufacturer: BORSEHUNG
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Axle Load [kg] to: 745
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: ST32/
22XA - Shock Absorber Mounting Type: Top pin
- Housing Diameter [mm]: 50
- Replace in pairs only:
- Manufacturer: SACHS AMORTYZATORY
- Name: Gas shock absorber
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
VW GOLF VI 08-
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Housing Diameter [mm]: 55
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube -
General Information: gas-
filled shock absorber; front - Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 55
- Piston Rod Diameter [mm]: 25
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version Technical Information: Please refer to the technical drawing in "Documents"
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Suspension Strut Outer Diameter [mm]: 50
- Piston Rod Diameter [mm]: 22
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version Technical Information: Please refer to the technical drawing in "Documents"
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Length [mm]: 632
- Vehicle Equipment: for vehicles without level control
- Length 1 [mm]: 371
- Length 2 [mm]: 584
- Shock Absorber System: Monotube
- Name: AMORT
- Manufacturer: BIL
- Quality class: Q
Additional information: "Tootja: BILSTEIN
VW/SKODA/SEAT
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
VW/SKODA/SEAT
(kvaliteediklass: Q)"
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension Strut Outer Diameter [mm]: 50
- Shock Absorber System: Single Tube Upside Down
-
Name: BI 35-
250845 - Manufacturer: BILSTEIN
- Quality class: Q
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension Strut Outer Diameter [mm]: 50
- Shock Absorber System: Single Tube Upside Down
-
Name: BI 35-
250869 - Manufacturer: BILSTEIN
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Single Tube Upside Down
-
Name: BI 35-
108191 - Manufacturer: BILSTEIN
Additional information: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)"
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Single Tube Upside Down
- Name: AMORT
- Manufacturer: BIL
- Quality class: Q
Additional information: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI A3/GOLF V ' 03-
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks