Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Equipment: for vehicles with direct shift transmission
-
Transmission Type: Dual-
Clutch Transmission - Filter type: Filter Insert
-
Lisainfo: Hydraulic filter,
gearbox, 6 speed aut. -
Additional information: Hydraulic filter,
gearbox, 6 speed aut.
Filter type: Filter Insert
-
Transmission Type: 6-
Speed Dual- Clutch Transmission - for PR number: 0ES
- Vehicle Equipment: for vehicles with direct shift transmission
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 8
- Colour: black
- Length [mm]: 87
- Outer Diameter [mm]: 21
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
Material: Plastic, PA 66 GF 30, GRP (Glass fibre Reinforced Plastic) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 05.2006
-
Transmission Type: for 7-
speed dual- clutch transmission -
Transmission Code: DQ200
(DSG7) - Filtritüüp: Filtrer
- Kõrgus (mm): 47
- Välisläbimõõt [mm]: 30
- Siseläbimõõt [mm]: 10
- Manufacturer: PURFLUX
-
Transmission Type: 6-
Speed Automatic Transmission - Height [mm]: 35
-
Supplementary Article/Supplementary Info: with gasket/
seal - Quantity Unit: Set
- See accessories list for additionally required parts:
-
Fabrication Number: FSF-
VW- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Transmission Code: DSG6
(DQ250) - Filter type: Filter Insert
- Height [mm]: 105
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 55
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: DENCKERMANN FILTRY
-
Transmission Type: 7-
Speed Dual- Clutch Transmission -
Vehicle Identification Number (VIN) from: 1Z-
9- 000001 - Filter type: Filter Insert
- Transmission Code: DQ200
-
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: MAX
-
Transmission Type: 6-
Speed Automatic Transmission - Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gasket/
seal - Width [mm]: 146
- Height [mm]: 28
- Sealing Ring Diameter [mm]: 7
-
Transmission Code: TF-
60SN, TF- 61SN - Manufacturer: KAMOKA
- Filter type: Screen Filter
- Manufacturer: JAPKO
Manufacturer: METALCAUCHO
-
Transmission Type: Dual-
Clutch Transmission - Filter type: Filter Insert
- Supplementary Article/Info 2: with seal ring
- for OE number: 02E 398 051
-
Transmission Code: DQ250/
02E - Consult accessories list for recommended additional repairs:
- Observe system fill quantity:
- Shape: Cylindrical
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Filter type: Filter Insert
- General Information: gearbox oil filter;narrow port
- Manufacturer: VIKA
-
Transmission Type: 6-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer Restriction: AISIN
- Quantity Unit: Set
-
Transmission Code: TF-
61SN, TF- 60SN, 09M, 09G - Supplementary Article/Info 2: without fastening material
- Number of mounting bores: 8
-
Name: Hdraulikafiltrikomplekt,
automaatkigukast - Manufacturer: MAX
-
Transmission Code: DSG6
(DQ250) - Transmission Type: Automatic Transmission
- Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gasket/
seal - Height [mm]: 105
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 55
- SVHC: No SVHC present!
-
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: MAN
- Filtritüüp: Filtrer
- Laius (mm): 146
- Kõrgus (mm): 28
- Käigukasti liik: Automaatkäigukast
-
Tihendiliik: Pehme-
tihend - Piirangutega toode/piirangu info: koos tihendiga
- Quality class: PJ
- Name: Automatic transmission filter
- Filter type: Screen Filter
- Manufacturer: ASHIKA
- Filter type: Screen Filter
- Manufacturer: JAPKO
- Filter type: Filter Insert
- Fitting Position: Left
- General Information: gearbox filter element
- Manufacturer: BORSEHUNG
-
Transmission Type: 6-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: without gasket/
seal -
Transmission Code: TF-
61SN, TF- 60SN, 09M, 09G - Filter type: Filter Insert
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MEY
-
Transmission Type: 6-
Speed Automatic Transmission -
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer Restriction: AISIN
-
Transmission Code: TF-
61SN, TF- 60SN, 09M, 09G - Number of mounting bores: 8
-
Name: HDRAULIKAFILTRIKOMPLEKT,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Material: Aluminium
- Inlet Ø [mm]: 16
- Outlet Ø [mm]: 16
- Packaging length [cm]: 11
- Packaging width [cm]: 10
- Packaging height [cm]: 10
- Weight [kg]: 0.6
- for OE number: 09G409061
- Diameter [mm]: 98
- New Part:
-
Transmission Type: 6-
Speed Automatic Transmission - Manufacturer: AKSDASIS
-
Transmission Type: 6-
Speed Automatic Transmission - Length [mm]: 290
- Height [mm]: 35
- Quantity Unit: Set
-
Supplementary Article/Supplementary Info: with gasket/
seal - Transmission Code: 09G
- See accessories list for additionally required parts:
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Weight [kg]: 0.446
- Manufacturer: VAICO
- Quality class: PJ
- Name: Automatic transmission filter
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Filter type: Filter Insert
- Length [mm]: 203.5
- Width [mm]: 121
- Height [mm]: 25.5
-
Transmission Code: 09G,
09M, TF- 60SN, TF- 61SN -
Supplementary Article/Supplementary Info: with gasket/
seal - Gasket Design: Fibre Composite
- Number of Holes: 8
- Packaging length [cm]: 19.7
- Packaging height [cm]: 23.3
- Net Weight [g]: 288
- Packaging width [cm]: 4.8
- Manufacturer: KNECHT
- Name: KN HX150KIT
Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission
- Filter type: Filter Insert
- Length [mm]: 203.5
- Width [mm]: 121
- Height [mm]: 25.5
-
Transmission Code: 09G,
09M, TF- 60SN, TF- 61SN -
Supplementary Article/Supplementary Info: with gasket/
seal - Gasket Design: Fibre Composite
- Number of Holes: 8
- Packaging length [cm]: 19.7
- Packaging height [cm]: 23.3
- Net Weight [g]: 288
- Packaging width [cm]: 4.8
- Manufacturer: MAHLE KNECHT
Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission
-
Vehicle Identification Number (VIN) from: 1Z-
9- 000001 - Filter type: Filter Insert
- Transmission Code: DQ200
- Vehicle Equipment: for vehicles with direct shift transmission
- See accessories list for additionally required parts:
- Weight [kg]: 0.023
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: 7-Speed Dual-Clutch Transmission, 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Overall Length [mm]: 520
- Connector Shape: D Shape
- Number of pins: 8
- Number of used contacts: 6
- Supplementary Article/Supplementary Info: with valve
-
Supplementary Article/Info 2: with seal ring,
with protection hose - Vehicle Equipment: for vehicles with automatic transmission
-
Transmission Type: for 6-
speed automatic transmission - Transmission Code: AQ 250
- Manufacturer: TOPRAN
Transmission ID: HFR, HFS, HFT, HTM, HTN, HTP, JTY, JUG, JUH, KGH, KGJ, KGV General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Core Length [mm]: 190
- Core Width [mm]: 75
- Core Depth [mm]: 72
- Radiator type: Brazed cooling fins
-
Supplementary Article/Supplementary Info: without gasket/
seal - Packaging width [cm]: 11.2
- Packaging height [cm]: 12.2
- Packaging length [cm]: 21
- Net Weight [g]: 669
- Name: MH CLC202000S
- Manufacturer: MAHLE
Transmission Type: Dual-Clutch Transmission, 6-Speed Automatic Transmission General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Weight [kg]: 0.2
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 53SKV027
- Clutch: for vehicles with double clutch
- Number of Gears: 6 Speed
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Weight [kg]: 0.572
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 6-
Speed Automatic Transmission - Number of pins: 14
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks