• Construction Year to: 12.2008
• Fitting Position: Rear, Front
• Number of pins: 3
• Socket colour: white
• Fabrication Number: EPDC-AU-000
• Name: NTY EPDC-AU-000
• Manufacturer: NTY

• Fitting Position: Rear, both sides
• Number of pins: 3
• Chemical Properties: Paintable
• Fabrication Number: EPDC-AU-017
• Name: NTY EPDC-AU-017
• Manufacturer: NTY

• Fitting Position: Rear
• Number of connectors: 3
• Colour: black
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Manufacturer: JP GROUP A/S
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Number of connectors: 3
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Fitting Position: Right
• General Information: cover for fog lamp; right
• Manufacturer: DPA

• Fitting Position: Left
• General Information: cover for fog lamp; left
• Manufacturer: DPA

• Name: Bumper grill right
• Quality class: PJ

Lisainfo: OCTAVIA II, 08- (kvaliteediklass PJ)

• Fitting Position: Right
• Colour: black
• General Information: reflector frame for fog lamp; right
• Manufacturer: DPA

• Fitting Position: Right
• General Information: cover for fog lamp; right
• Manufacturer: DPA

• Fitting Position: Left
• General Information: cover for fog lamp; left
• Manufacturer: DPA

• Fitting Position: Right Front
• General Information: cross panel; right
• Manufacturer: DPA

• Fitting Position: Left Front
• General Information: cross panel; left
• Manufacturer: DPA

• Fitting Position: Right Front
• General Information: guide profile for front bumper; right
• Manufacturer: DPA

• Fitting Position: Left Front
• General Information: guide profile for front bumper; left
• Manufacturer: DPA

• Fitting Position: Right Front
• General Information: guide profile for front bumper; right
• Manufacturer: DPA

• Fitting Position: both sides, Rear, Front, inner, outer
• Fabrication Number: EPDC-AU-007
• Name: NTY EPDC-AU-007
• Manufacturer: NTY

• Quality class: PJ

Lisainfo: OCTAVIA II, 08- (kvaliteediklass PJ)

• Fitting Position: Front
• Colour: black
• General Information: vent grille; lower middle
• Manufacturer: DPA

• Fitting Position: Front, Rear
• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Fabrication Number: EPDC-VW-003
• Name: NTY EPDC-VW-003
• Manufacturer: NTY

• Construction Year to: 12.2008
• Fitting Position: Front, Rear
• Block Separation:
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Colour: black
• Number of pins: 3
• Required quantity: 4
• Connector Shape: oval
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear
• Manufacturer: YSPARTS

• Sensor Type: Ultrasonic Sensor
• Fitting Position: both sides, Front, Rear, inner
• Fabrication Number: EPDC-CH-002
• Name: NTY EPDC-CH-002
• Manufacturer: NTY

• Fitting Position: Rear, Front
• Block Separation:
• Construction Year to: 12.2008
• Number of connectors: 3
• Colour: black
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 28SKV035
• Manufacturer: ESEN SKV

• Construction Year to: 12.2008
• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year to: 12.2008
• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Fitting Position: Rear
• Voltage [V]: 12
• Sensor Type: Ultrasonic Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 28SKV045
• Manufacturer: ESEN SKV

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: MM SDP097
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: MM SDP018
• Manufacturer: MAGNETI MARELLI

• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ)

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Construction Year to: 12.2008
• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Colour: black
• Shape: angled
• Chemical Properties: Over-paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: Rear, Front, both sides
• Socket colour: black
• Colour Code: GRU
• Connector Shape: D Shape
• Sensor Type: Ultrasonic Sensor
• for OE number: 7H0 919 275 C GRU
• Chemical Properties: Paintable
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Number of pins: 3
• Voltage [V]: 12
• Housing material: Plastic
• Width [mm]: 49
• Height [mm]: 36
• Weight [kg]: 0.031
• Operating Mode: Electric
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: Front, Lower, Centre
• General Information: vent grille; lower middle
• Manufacturer: DPA

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: MM SDP105
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear
• Manufacturer: FAST

• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ)

• Fitting Position: both sides
• Sensor Type: Ultrasonic Sensor
• for OE number: 1S0 919 275
• Chemical Properties: Paintable
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Number of pins: 3
• Connector Shape: oval
• Voltage [V]: 12
• Housing material: Plastic
• Width [mm]: 49
• Height [mm]: 36
• Weight [g]: 35
• Operating Mode: Electric
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: both sides
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• for OE number: 3D0 998 275 A
• Chemical Properties: Paintable
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Housing material: Plastic
• Width [mm]: 49
• Height [mm]: 36
• Weight [g]: 35
• Operating Mode: Electric
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Manufacturer: ERA

• Fitting Position: Rear, Front
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Shape: angled
• Chemical Properties: Paintable
• Manufacturer: FAE ELEKTRYKA

• Fitting Position: Rear
• General Information: parking aid sensor; rear; primed
• Manufacturer: BORSEHUNG

• Fitting Position: Front, Rear
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Chemical Properties: Paintable
• Manufacturer: FAE ELEKTRYKA

• Fitting Position: Front
• General Information: parking aid sensor; front; primed
• Manufacturer: BORSEHUNG

• Required quantity: 4
• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Article number of recommended accessories: 2324100
• Manufacturer: METZGER

• Construction Year to: 12.2008
• Required quantity: 4
• Fitting Position: both sides, Front, Rear
• Vehicle type: Octavia
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Shaft form: round
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141411
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 12.2008
• Required quantity: 4
• Fitting Position: both sides, Front, Rear
• Vehicle type: Octavia
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Shaft form: oval
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141031
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of pins: 3
• Shape: angled
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front, Rear
• Length [mm]: 40
• Width [mm]: 23
• Height [mm]: 26
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Surface: primed
• Number of pins: 3
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.014
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Version: IAM
• Manufacturer: METZGER

• Fitting Position: Rear, Front
• Length [mm]: 33.5
• Width [mm]: 45
• Height [mm]: 47
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Housing Colour: black
• Weight [kg]: 0.04
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Connector Shape: angled
• Version: OE
• Manufacturer: METZGER

• Construction Year to: 12.2008
• Fitting Position: Rear, Front
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Alternatively:
• Number of pins: 3
• Chemical Properties: Over-paintable
• Housing Colour: black
• See accessories list for additionally required parts:
• Article number of recommended accessories: V99-72-0002
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: Bumper, front
• Quality class: PJ

Lisainfo: OCTAVIA II, 08- (kvaliteediklass PJ)

• Quality class: PJ

Lisainfo: OCTAVIA II, 08- (kvaliteediklass PJ)

• Fitting Position: Front
• General Information: radiator grille; without emblem
• Manufacturer: DPA

• Fitting Position: Front
• Manufacturer: DPA

General Information: radiator grille; without trim strip; without emblem

• Name: Bumper, front
• Quality class: PJ

Lisainfo: OCTAVIA II, 08- (kvaliteediklass PJ)

• Construction Year from: 01.2009
• Required quantity: 4
• Fitting Position: both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 22
• Height [mm]: 26.3
• Number of pins: 3
• Diameter [mm]: 15.5
• Manufacturer: VALEO

• Thickness 1 [mm]: 2.1
• Fitting Position: Front
• General Information: reinforcement for front bumper; 2.1MM
• Manufacturer: DPA

• Fitting Position: Front
• General Information: radiator grille; with trim strip; without emblem
• Manufacturer: DPA

• Name: Bumper, front
• Quality class: PJ

Lisainfo: OCTAVIA II, 08- (kvaliteediklass PJ)

• Name: Bumper, front
• Quality class: PC

Lisainfo: OCTAVIA II, 08- (kvaliteediklass PC)

• Quality class: Q

Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"

• Name: Bumper, front
• Quality class: PC

Lisainfo: OCTAVIA II, 08- (kvaliteediklass PC)

• Construction Year to: 12.2008
• Required quantity: 4
• Fitting Position: both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 44
• Width [mm]: 23.15
• Height [mm]: 46
• Number of pins: 3
• Diameter [mm]: 16.6
• Name: VA 890050
• Manufacturer: VALEO

• Name: Bumper, front
• Quality class: PC

Lisainfo: OCTAVIA II, 08- (kvaliteediklass PC)