• Quantity per packing unit: 10
• Inner Diameter [mm]: 28.5
• Sealing Ring Diameter [mm]: 28.5
• Thickness [mm]: 3.8
• Shape: O-Ring
• Name: RONGASTIHEND
• Manufacturer: HAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Name: Radiator
• Quality class: ZJ

Lisainfo: BEETLE, 11- (kvaliteediklass Z)

• Vehicle Equipment: for vehicles with/without air conditioning
• Construction Year from: 02.2010
• Core Depth [mm]: 16
• Core Length [mm]: 627
• Core Width [mm]: 408
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: BEETLE, 11- (kvaliteediklass PJ) Additional information: BEETLE, 11- (kvaliteediklass PJ)

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Construction Year from: 02.2010
• Core Depth [mm]: 32
• Core Length [mm]: 650
• Core Width [mm]: 430
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: BEETLE, 11- (kvaliteediklass PJ) Additional information: BEETLE, 11- (kvaliteediklass PJ)

• Quantity per packing unit: 10
• Thickness [mm]: 3.8
• Outer Diameter [mm]: 28.5
• Material: Rubber
• Weight [kg]: 0.006
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: blue
• Pressure [bar]: 1.4
• Material: Plastic
• Weight [kg]: 0.112
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Length [mm]: 650
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 31
• Core Length [mm]: 650
• Core Width [mm]: 415
• Manufacturer: KAMOKA

• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 650
• Core Width [mm]: 416
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Core Length [mm]: 625
• Core Width [mm]: 405
• Core Depth [mm]: 18
• Inlet Ø [mm]: 22
• Outlet Ø [mm]: 22
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 97.5
• Packaging width [cm]: 58.5
• Weight [kg]: 4.26
• Manufacturer: AKSDASIS

• Core Length [mm]: 650
• Core Width [mm]: 342
• Core Depth [mm]: 23
• Fabrication Number: CCH-AU-013
• Radiator type: Mechanically jointed cooling fins

Vehicle Equipment: for vehicles with air conditioning, for vehicles without air conditioning

• Vehicle Equipment: for vehicles with air conditioning
• Climate Zones: for hot climate zones
• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 648*406*26
• Additional information: 648*406*26

• Vehicle Equipment: for vehicles with air conditioning
• Climate Zones: for hot climate zones
• Material: Aluminium
• Core Length [mm]: 415
• Core Width [mm]: 650
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: MAX

• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 650
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Manufacturer: JPN

• Vehicle Equipment: for vehicles with air conditioning
• Cooling fins material: Aluminium
• Core Depth [mm]: 24
• Core Length [mm]: 650
• Core Width [mm]: 414
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Core Length [mm]: 650
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Manufacturer: JP GROUP
• Lisainfo: Radiator, 650x415 mm, PL/ALU
• Additional information: Radiator, 650x415 mm, PL/ALU

• Vehicle Equipment: for vehicles with air conditioning
• Climate Zones: for hot climate zones
• Material: Aluminium
• Core Length [mm]: 648
• Core Width [mm]: 388
• Core Depth [mm]: 26
• Supplementary Article/Info 2: with seal ring
• Radiator type: Brazed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 648*406*26
• Additional information: 648*406*26

• Core Length [mm]: 648
• Core Width [mm]: 406
• Core Depth [mm]: 26
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Specification: Schnellverschlu?
• Packaging length [cm]: 82.4
• Packaging width [cm]: 44.8
• Packaging height [cm]: 9.7
• Weight [kg]: 2.92
• Manufacturer: AKSDASIS

• Vehicle Equipment: for vehicles with air conditioning
• Climate Zones: for hot climate zones
• Core Width [mm]: 415
• Core Length [mm]: 650
• Core Depth [mm]: 34
• Material: Aluminium
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: without coolant regulator
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 4.31
• Manufacturer: VALEO
• Name: VA 732872

• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 650
• Core Width [mm]: 416
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 65280A
• Lisainfo: VOLKSWAGEN CC (358) (11-) 1.8 TSI
• Additional information: VOLKSWAGEN CC (358) (11-) 1.8 TSI

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 625
• Core Width [mm]: 400
• Core Depth [mm]: 23
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Name: Radiator
• Quality class: PJ

Lisainfo: "Tootja: KOYO
BEETLE, 11-
(kvaliteediklass: PJ)"

• Heating/Cooling: for vehicles with extra cooling
• Core Length [mm]: 625
• Core Width [mm]: 408
• Core Depth [mm]: 18
• Lisainfo: Radiator, engine cooling
• Additional information: Radiator, engine cooling

• Name: Radiator
• Quality class: P

Lisainfo: BEETLE, 11- (kvaliteediklass P)

• Climate Zones: not for hot climate zones, for hot climate zones
• Block Separation:
• Vehicle Equipment: for vehicles without air conditioning
• Material: Aluminium
• Core Length [mm]: 652
• Core Width [mm]: 452
• Core Depth [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 650*452*34
• Additional information: 650*452*34

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Construction Year from: 02.2010
• Core Depth [mm]: 26
• Core Length [mm]: 650
• Core Width [mm]: 388
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: "Tootja: SRL
BEETLE, 11-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
BEETLE, 11-
(kvaliteediklass: PJ)"

• Climate Zones: for hot climate zones
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 650
• Core Width [mm]: 416
• Core Depth [mm]: 34
• Water Tank Material (radiator): Plastic
• Transmission Type: Manual Transmission
• Packaging height [cm]: 11.5
• Net Weight [g]: 2,937
• Packaging width [cm]: 45
• Packaging length [cm]: 84
• Name: Radiaator,mootorijahutus
• Manufacturer: BEH MAH

Vehicle Equipment: for vehicles with air conditioning, for vehicles with/without air conditioning General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Cooling fins material: Aluminium
• Core Depth [mm]: 32
• Core Length [mm]: 652
• Core Width [mm]: 452
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Vehicle Equipment: for vehicles with air conditioning
• Climate Zones: for hot climate zones
• Heating/Cooling: Auxiliary Radiator
• Material: Aluminium
• Core Length [mm]: 625
• Core Width [mm]: 408
• Core Depth [mm]: 16
• Radiator type: Brazed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 745*406*18
• Additional information: 745*406*18

• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 650
• Core Width [mm]: 453
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: with cap, without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 65295
• Lisainfo: AUDI A 3 / S 3 (8P) (03-) 1.2 TFSI
• Additional information: AUDI A 3 / S 3 (8P) (03-) 1.2 TFSI

• New Part:
• Vehicle Equipment: for vehicles with/without air conditioning
• Core Length [mm]: 650
• Core Width [mm]: 450
• Core Depth [mm]: 34
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Packaging length [cm]: 83.5
• Packaging width [cm]: 58.5
• Packaging height [cm]: 15
• Weight [kg]: 3.36
• for OE number: 1K0121251CL
• Manufacturer: AKSDASIS

• Cooling fins material: Aluminium
• Core Depth [mm]: 16
• Core Length [mm]: 625
• Core Width [mm]: 408
• Inlet Ø [mm]: 22
• Outlet Ø [mm]: 22
• Radiator type: Brazed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 65294
• Lisainfo: VOLKSWAGEN CADDY IV (SA) (15-) 1.2 TSI
• Additional information: VOLKSWAGEN CADDY IV (SA) (15-) 1.2 TSI

• Radiator type: Brazed cooling fins
• Core Length [mm]: 650
• Core Width [mm]: 428
• Core Depth [mm]: 26
• Water Tank Material (radiator): Plastic
• Vehicle Equipment: for vehicles with/without air conditioning
• Packaging height [cm]: 16.5
• Net Weight [g]: 3,385
• Packaging width [cm]: 54
• Packaging length [cm]: 87.5
• Name: Radiaator,mootorijahutus
• Manufacturer: BEH MAH

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Vehicle Equipment: for vehicles with air conditioning
• Climate Zones: for hot climate zones
• Core Width [mm]: 626
• Core Length [mm]: 406
• Core Depth [mm]: 18
• Material: Aluminium
• Housing Type: Synthetic Material Housing
• Inlet Ø [mm]: 22
• Outlet Ø [mm]: 22
• Weight [kg]: 3.64
• Manufacturer: VALEO

Heating/Cooling: Auxiliary Radiator, for vehicles without oil cooler

• Vehicle Equipment: for vehicles with air conditioning
• Heating/Cooling: Auxiliary Radiator
• Climate Zones: for hot climate zones
• New Part:
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 626
• Core Width [mm]: 408
• Core Depth [mm]: 16
• Water Tank Material (radiator): Plastic
• Packaging width [cm]: 17
• Net Weight [g]: 2,300
• Packaging height [cm]: 57
• Packaging length [cm]: 84
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.