• Supplementary Article/Info 2: with wheel hub, with integrated ABS sensor
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-018
• Manufacturer: NTY
• Name: NTY KLP-VW-018

• Supplementary Article/Info 2: with wheel hub
• Fabrication Number: KLP-VW-022
• Article number of recommended accessories: KLP-VW-022-Z
• Manufacturer: NTY
• Name: NTY KLP-VW-022

Fitting Position: Front Axle, Front Axle Left, Front Axle Right, Rear Axle

• Material: Metal
• Surface: Zinc-coated
• Manufacturer: AUTO-GH
• Name: GH 399961

Fitting Position: Front Axle, Front Axle Right, Front Axle Left, Lower Front Axle

• Length [mm]: 70
• External Thread [mm]: M16 x 1,5
• Bolt Head-/Nut Design: Female Star
• Quality/ Grade: 10.9
• Fitting Position: Rear Axle both sides
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Flange Diameter [mm]: 136.9
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Bearing Type: Ball Bearing
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 137
• Rim Hole Number: 5
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 2.53
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV006

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 288
• Width [mm]: 83
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 136.5
• Width 2 [mm]: 48
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Outer Diameter 2 [mm]: 81
• Inner Diameter 2 [mm]: 51
• Number of mounting bores: 4
• Name: Rattalaagrikomplekt
• Manufacturer: OPT
• Additional information: 101017
• Lisainfo: 101017

• for PR number: 1KD, 1KF, 1KP
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 32
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with grease cap, with screw General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 32
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Bolt Length [mm]: 59
• Outer Diameter 2 [mm]: 136.9
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle
• Width [mm]: 67.7
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136.5
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Inner Diameter 1 [mm]: 32
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Version: One
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 32
• Manufacturer: GSP

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 137
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• for PR number: 1LP, 1ZE, 1ZM
• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: GSP

• Fitting Position: Front Axle
• for PR number: 1LL, 1LP, 1ZE, 1ZM
• Flange Diameter [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Rear Axle
• Required quantity: 2
• Rim Hole Number: 5
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Number of mounting bores: 3
• Outer Diameter [mm]: 136
• Outer Diameter 1 [mm]: 80
• Outer Diameter 2 [mm]: 65
• Width 2 [mm]: 48
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Width [mm]: 84
• Outer Diameter 2 [mm]: 137
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• for PR number: 1ZC, 1ZF
• Flange Diameter [mm]: 136
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 137
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT
• Additional information: 102019A
• Lisainfo: 102019A

• Quantity: 2
• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2.366
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.72
• Number of Holes: 5
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV010
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• for OE number: 1T0498621
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 136.5
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.39
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV040

• Fitting Position: Front Axle
• Width [mm]: 84
• Outer Diameter 2 [mm]: 136
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 32
• Width [mm]: 67.7
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• for PR number: 1LP, 1ZE, 1ZM
• Fitting Position: Front Axle Left, Front Axle Right
• Version: One
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621C
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Weight [kg]: 2.425
• Packaging length [cm]: 16
• Packaging width [cm]: 16
• Packaging height [cm]: 11
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 32
• Width [mm]: 67.7
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 136.9
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) from: 1Z-52121647, 1Z-58052422
• for PR number: 1ZC, 1ZF
• Rim Hole Number: 5
• Quantity per axle: 2
• Number of flange connections: 3
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with bolts/screws, with integrated magnetic sensor ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 136
• for OE number: 1T0 498 621 SK
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: REAR LR+RE
• for OE number: 3G0598611A
• Inner Diameter [mm]: 32
• Width 1 [mm]: 70
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 5
• Name: DA KWD1005
• Manufacturer: DAYCO

• Fitting Position: Front Axle
• for OE number: 1K0498621
• Manufacturer: DELLO AUTOMEGA

• for PR number: 1KD, 1KF, 1KP, 1KS, 1KT
• Block Separation:
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.366
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Observe service information:
• Manufacturer: FEBI

Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 136
• for OE number: 1K0498621
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Outer Diameter [mm]: 136.4
• Width 2 [mm]: 48.1
• Outer Diameter 1 [mm]: 80
• Outer Diameter 2 [mm]: 65
• Number of mounting bores: 3
• Manufacturer: JPN

• Fitting Position: Front Axle
• for PR number: 1ZC, 1ZF
• Flange Diameter [mm]: 136
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 280
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP

• Number of Holes: 5
• Outer Diameter [mm]: 137
• Braking/Drive Dynamics: for vehicles with ABS
• Width [mm]: 69, 70
• Inner Diameter [mm]: 32
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Fitting Position: Rear Axle
• Weight [kg]: 2.549
• Manufacturer: VAICO

Supplementary Article/Info 2: with integrated magnetic sensor ring, with wheel bearing General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: wheel hub with bearing; rear; with dust cover
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Required quantity: 2
• for PR number: 1ZM, 1LP, 1LL, 1ZE
• Rim Hole Number: 5
• Manufacturer: DRIVE

• Fitting Position: Front Axle Left, Front Axle Right
• for PR number: 1ZC, 1ZF
• Width [mm]: 84
• Inner Diameter [mm]: 27.4
• Outer Diameter [mm]: 80
• Flange Diameter [mm]: 136.5
• Distance of mounting bores [mm]: 112
• Supplementary Article/Info 2: with ABS sensor ring
• Net weight [kg]: 3.25
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• Required quantity: 2
• for PR number: 1ZC, 1ZF
• Rim Hole Number: 5
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Required quantity: 2
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Flange Diameter [mm]: 136.9
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• for PR number: 1KD, 1KF, 1KP, 1KS, 1KT
• Block Separation:
• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.366
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Observe service information:
• Name: SW 32 92 3320
• Manufacturer: SWAG

Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 32
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

Supplementary Article/Info 2: with integrated magnetic sensor ring, with screw, with grease cap, with wheel hub General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 280
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• for OE number: 1K0407621D
• Outer Diameter [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with bolts/screws, with integrated ABS sensor
• Number of Teeth: 36
• Manufacturer: GSP
• Additional information: 9336004K
• Lisainfo: 9336004K

• Supplementary Article/Info 2: with wheel bearing
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: JP GROUP
• Lisainfo: Wheel Hub
• Additional information: Wheel Hub

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• for OE number: 5K0498621
• Inner Diameter [mm]: 29
• Width 1 [mm]: 67
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 5
• Name: DA KWD1001
• Manufacturer: DAYCO

• Quantity: 2
• Construction Year from: 12.2010
• Construction Year to: 12.2010
• Fitting Position: Front Axle
• Number of Holes: 4
• General Information: wheel hub with bearing; 4holes
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width [mm]: 69
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 137
• Distance of mounting bores [mm]: 112
• Supplementary Article/Info 2: with integrated ABS sensor
• Net weight [kg]: 2.44
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• for PR number: 1LL, 1LP, 1ZE, 1ZM
• Rim Hole Number: 5
• Flange Diameter [mm]: 137
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle
• Width [mm]: 83
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 81
• Distance of mounting bores [mm]: 112
• Supplementary Article/Info 2: with ABS sensor ring
• Thread Size: M14x1,5
• Rim Hole Number: 5
• Number of Teeth, ABS ring: 86
• Net weight [kg]: 3.61
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZM, 1LP, 1LL
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 27.5
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Rim Hole Number: 5
• Fastening Type: Four-point attachment
• Braking/Drive Dynamics: for vehicles with ABS
• Number of Teeth: 36
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated magnetic sensor ring, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Quantity: 2
• Construction Year from: 12.2010
• Construction Year to: 12.2010
• Fitting Position: Front Axle
• Number of Holes: 3
• Weight [kg]: 0.765
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 112
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bearing Type: Angular Ball Bearing
• General Information: wheel hub with bearing; front; 3holes
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Width [mm]: 55
• Manufacturer: FAST

• for PR number: 1ZC, 1ZF
• Block Separation:
• Number of mounting bores: 3
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.765
• for OE number: 5K0 498 621 A
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• for PR number: 1LL, 1LP, 1ZE, 1ZM
• Weight [kg]: 3.913
• Packaging length [cm]: 16
• Packaging width [cm]: 16
• Packaging height [cm]: 11
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 137
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• not for PR number: 1ZC, 1ZF
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Outer Diameter 2 [mm]: 65
• Outer Diameter 1 [mm]: 85
• Width 2 [mm]: 48
• Number of mounting bores: 4
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG
• Lisainfo: 713 6106 10 FAG
• Additional information: 713 6106 10 FAG

• Fitting Position: Front Axle
• Required quantity: 2
• for PR number: 1LL, 1LP, 1ZM, 1ZE
• Technical Information: Knuckle, number of holes 4
• Flange Diameter [mm]: 137
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKBA 3643 SKF
• Additional information: VKBA 3643 SKF

• for PR number: 1ZC, 1ZF
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Teeth, ABS ring: 96
• Rim Hole Number: 5
• Fastening Type: 3-point attachment
• Number of Teeth: 36
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated magnetic sensor ring, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 280
• Width [mm]: 83
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 136.5, 80
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of mounting bores: 3
• Number of Teeth on input shaft: 36
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Front Axle
• Required quantity: 2
• for PR number: 1ZF, 1ZC
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Outer Diameter 2 [mm]: 136
• Manufacturer: KAVO

• Fitting Position: Front Axle Left, Front Axle Right
• not for PR number: 1ZC, 1ZF
• Rim Hole Number: 5
• Quantity per axle: 2
• Number of flange connections: 4
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with bolts/screws, with integrated magnetic sensor ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 32
• Always compare old and new part (in particular OE No.):
• Manufacturer Restriction: Durchmesser beachten
• Outer Diameter [mm]: 137
• Width [mm]: 69.5
• Manufacturer: METZGER

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Fitting Position: Rear Axle
• Width [mm]: 80
• Manufacturer: FAST

• for PR number: 1ZC, 1ZF
• Block Separation:
• Number of mounting bores: 3
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.765
• for OE number: 5K0 498 621 A
• Name: SW 30 92 7342
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for PR number: 1ZC, 1ZF
• Number of mounting bores: 3
• Outer Diameter 1 [mm]: 136
• Outer Diameter 2 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: METZGER

Supplementary Article/Info 2: with wheel hub, with integrated magnetic sensor ring

• Fitting Position: Front Axle both sides
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 4
• Weight [kg]: 3.12
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Width [mm]: 84.5
• Inner Diameter [mm]: 27.5
• Outer Diameter [mm]: 136
• Bearing Type: Rolling Bearing
• General Information: wheel hub with bearing; front; 4 holes
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle, Front
• Quantity: 2
• Number of bores: 3
• Number of Holes: 3
• General Information: wheel hub with bearing; front; 3 holes
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle
• Required quantity: 2
• for PR number: 1ZC, 1ZF
• Weight [kg]: 3.273
• Packaging length [cm]: 16
• Packaging width [cm]: 16
• Packaging height [cm]: 11
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter [mm]: 136
• Outer Diameter 2 [mm]: 80
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front
• Number of bores: 3
• Supplementary Article/Info 2: with bolts
• Manufacturer: BORSEHUNG

General Information: wheel hub with bearing; front; 3 holes; with screws