• Quantity per packing unit: 10
• Inner Diameter [mm]: 28.5
• Sealing Ring Diameter [mm]: 28.5
• Thickness [mm]: 3.8
• Shape: O-Ring
• Name: RONGASTIHEND
• Manufacturer: HAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Aluminium, Plastic
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Core Length [mm]: 430
• Core Width [mm]: 414
• Core Depth [mm]: 23
• Manufacturer: JP GROUP
• Lisainfo: Radiator, 430x414 mm, PL/ALU
• Additional information: Radiator, 430x414 mm, PL/ALU

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Core Length [mm]: 629
• Core Width [mm]: 399
• Core Depth [mm]: 22
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, 630x413 mm, PL/ALU
• Additional information: Radiator, 630x413 mm, PL/ALU

• Core Depth [mm]: 22
• Core Length [mm]: 650
• Core Width [mm]: 328
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Name: Radiator
• Quality class: PJ

Lisainfo: IBIZA V (kvaliteediklass PJ) Additional information: IBIZA V (kvaliteediklass PJ)

• Quantity per packing unit: 10
• Thickness [mm]: 3.8
• Outer Diameter [mm]: 28.5
• Material: Rubber
• Weight [kg]: 0.006
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Diameter [mm]: 51
• Height [mm]: 35
• Manufacturer: ASHIKA

• Diameter [mm]: 51
• Height [mm]: 35
• Manufacturer: JAPKO

• Colour: blue
• Pressure [bar]: 1.4
• Material: Plastic
• Weight [kg]: 0.112
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Netopikkus [mm]: 430
• Netolaius [mm]: 415
• Netosügavus [mm]: 23
• Jahutusribi materjal: Alumiinium
• Piirangutega toode/piirangu info 2: ilma raamita
• Materjal veekamber (radiaator): Plastik
• Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
• Lisainfo: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V
• Additional information: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V

• Vehicle Equipment: for vehicles without air conditioning
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 59.5
• Packaging width [cm]: 44
• Packaging height [cm]: 11.5
• Weight [kg]: 2.2
• Manufacturer: AKSDASIS

• Vehicle type: Roomster
• Engine Code: BXW
• Block Separation:
• Material: Aluminium
• Core Length [mm]: 415
• Core Width [mm]: 430
• Core Depth [mm]: 23
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: MAX

Vehicle Equipment: for vehicles without air conditioning, for vehicles with trailer hitch

• Vehicle Equipment: for vehicles without air conditioning
• Engine Code: BXW
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 414
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 22
• Core Length [mm]: 430
• Core Width [mm]: 415
• Manufacturer: KAMOKA
• Additional information: 7705117 KAMOKA
• Lisainfo: 7705117 KAMOKA

• Vehicle Equipment: for vehicles with air conditioning
• Engine Code: BXW
• Material: Aluminium
• Core Length [mm]: 635
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 632*389*26
• Additional information: 632*389*26

• Vehicle type: Roomster
• Vehicle Equipment: for vehicles with air conditioning
• Engine Code: BXW
• Block Separation:
• Material: Aluminium
• Core Length [mm]: 415
• Core Width [mm]: 635
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: MAX

• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 416
• Core Width [mm]: 430
• Core Depth [mm]: 23
• Manufacturer: JPN

• for model code: Roomster, Roomster Scout
• Engine Code: BXW
• Block Separation:
• Material: Aluminium
• Heating/Cooling: excl. Radiator Fan
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 430*414*23
• Additional information: 430*414*23

Vehicle Equipment: for vehicles without air conditioning, for vehicles with trailer hitch

• Name: Radiator
• Quality class: P

Lisainfo: IBIZA V (kvaliteediklass P)

• Name: Radiator
• Quality class: ZJ

Lisainfo: POLO 01- (kvaliteediklass ZJ)

• Name: Radiator
• Quality class: ZJ

Lisainfo: CORDOBA 02- (kvaliteediklass ZJ)

• Vehicle type: Roomster
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 416
• Core Width [mm]: 630
• Core Depth [mm]: 23
• Manufacturer: JPN

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 34
• Core Length [mm]: 650
• Core Width [mm]: 322
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 630
• Core Width [mm]: 414
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• General Information: radiator; pipe enlarging
• Manufacturer: VIKA

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 23
• Core Length [mm]: 635
• Core Width [mm]: 415
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 630
• Core Width [mm]: 414
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Water Tank Material (radiator): Plastic

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 630
• Core Width [mm]: 416
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 652711
• Lisainfo: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V
• Additional information: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Vehicle Equipment: for vehicles with air conditioning
• Engine Code: BXW
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 630
• Core Width [mm]: 414
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Vehicle type: Roomster
• Engine Code: CGGB
• Block Separation:
• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 308
• Core Depth [mm]: 26
• Radiator type: Brazed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: MAX

• Vehicle Equipment: for vehicles without air conditioning
• Engine Code: BXW
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 415
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Name: Radiaator,mootorijahutus
• Manufacturer: NIS
• Lisainfo: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V
• Additional information: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V

• Transmission Type: Manual Transmission
• Core Length [mm]: 633
• Core Width [mm]: 415
• Core Depth [mm]: 30
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 82.6
• Packaging width [cm]: 44.3
• Packaging height [cm]: 11.2
• Weight [kg]: 2.52
• Manufacturer: AKSDASIS

• Engine Code: CGGB
• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 308
• Core Depth [mm]: 26
• Supplementary Article/Info 2: with mounting parts
• Radiator type: Brazed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 650*328*26
• Additional information: 650*328*26

• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 63
• Packaging width [cm]: 47
• Packaging height [cm]: 16.5
• Weight [kg]: 1.84
• Manufacturer: AKSDASIS

• Engine Code: BXW, CGGB
• Core Depth [mm]: 23
• Core Length [mm]: 630
• Core Width [mm]: 414
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Manufacturer: MAGNETI MARELLI
• Name: MM BM841

• Engine Code: BXW
• Vehicle Equipment: for vehicles with air conditioning
• Core Width [mm]: 415
• Core Length [mm]: 635
• Core Depth [mm]: 23
• Material: Aluminium
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: with coolant regulator
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 3.86
• Manufacturer: VALEO

• Vehicle type: Roomster, Roomster Scout
• Engine Code: CGGB
• Block Separation:
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 655
• Core Width [mm]: 340
• Core Depth [mm]: 32
• Manufacturer: JPN

• Engine Code: CGGB
• Material: Aluminium
• Core Length [mm]: 649
• Core Width [mm]: 342
• Core Depth [mm]: 23
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 650*340*23
• Additional information: 650*340*23

• Engine Code: BXW
• New Part:
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 630
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Water Tank Material (radiator): Plastic
• Transmission Type: Automatic Transmission, Manual Transmission
• Packaging width [cm]: 12
• Net Weight [g]: 3,274
• Packaging height [cm]: 46.5
• Packaging length [cm]: 79
• Manufacturer: MAHLE
• Name: MH CR505000S

Vehicle Equipment: for vehicles with air conditioning, for vehicles with/without air conditioning General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Core Depth [mm]: 16
• Core Length [mm]: 426
• Core Width [mm]: 408
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: FABIA 99- (kvaliteediklass P) Additional information: FABIA 99- (kvaliteediklass P)

• Engine Code: CGGB
• Core Width [mm]: 650
• Core Length [mm]: 340
• Core Depth [mm]: 23
• Material: Aluminium
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: with coolant regulator
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 3.01
• Manufacturer: VALEO

• Engine Code: BXW, CGGB
• Core Length [mm]: 649
• Core Width [mm]: 342
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Name: MM BM1823
• Manufacturer: MAGNETI MARELLI

• Engine Code: CGGB
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 341
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Engine Code: CGGB
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 341
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Engine Code: BXW
• New Part:
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 430
• Core Width [mm]: 413
• Core Depth [mm]: 26
• Water Tank Material (radiator): Plastic
• Supplementary Article/Info 2: with seal ring
• Transmission Type: Manual Transmission
• Packaging height [cm]: 10.5
• Net Weight [g]: 1,840
• Packaging width [cm]: 44
• Packaging length [cm]: 62.5
• Name: Radiaator,mootorijahutus
• Manufacturer: BEH MAH

Vehicle Equipment: for vehicles with trailer hitch, for vehicles without air conditioning General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Engine Code: CGGB
• Core Length [mm]: 648
• Core Width [mm]: 326
• Core Depth [mm]: 26
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, 648x326 mm, PL/ALU
• Additional information: Radiator, 648x326 mm, PL/ALU

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 415
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Lisainfo: VOLKSWAGEN POLO IV (9N) (01-) 1.2 i 12V
• Additional information: VOLKSWAGEN POLO IV (9N) (01-) 1.2 i 12V

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Heating/Cooling: incl. fan
• Core Depth [mm]: 20
• Core Length [mm]: 430
• Core Width [mm]: 415
• Manufacturer: KAMOKA

• Engine Code: BXW, CGGB
• Vehicle Equipment: for vehicles without air conditioning
• Core Width [mm]: 415
• Core Length [mm]: 430
• Core Depth [mm]: 23
• Material: Aluminium
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: with coolant regulator
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 3
• Manufacturer: VALEO
• Name: VA 733062

• Core Depth [mm]: 26
• Core Length [mm]: 648
• Core Width [mm]: 328
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Name: Radiator
• Quality class: PJ

Lisainfo: A1 (kvaliteediklass PJ) Additional information: A1 (kvaliteediklass PJ)

• Engine Code: CGGB
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 650
• Core Width [mm]: 322
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 640012
• Lisainfo: AUDI A 1 / S 1 (8X) (10-) 1.2 TFSI
• Additional information: AUDI A 1 / S 1 (8X) (10-) 1.2 TFSI

• Core Depth [mm]: 26
• Core Length [mm]: 628
• Core Width [mm]: 408
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: CORDOBA 02- (kvaliteediklass P) Additional information: CORDOBA 02- (kvaliteediklass P)

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with air conditioning
• Core Depth [mm]: 26
• Core Length [mm]: 635
• Core Width [mm]: 395
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: POLO 01- (kvaliteediklass P) Additional information: POLO 01- (kvaliteediklass P)

• Engine Code: CGGB
• New Part:
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 649
• Core Width [mm]: 340
• Core Depth [mm]: 26
• Water Tank Material (radiator): Plastic
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Cooling fins material: Aluminium
• Manufacturer: MAHLE
• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Packaging width [cm]: 12
• Net Weight [g]: 2,529
• Packaging height [cm]: 48.5
• Packaging length [cm]: 83.5
• Name: Radiaator,mootorijahutus

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• for model code: Roomster, Roomster Scout
• Engine Code: BXW, CGGB
• Block Separation:
• Material: Aluminium
• Heating/Cooling: incl. fan
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Manufacturer: NRF
• Lisainfo: 430*413*23
• Additional information: 430*413*23

Vehicle Equipment: for vehicles without air conditioning, for vehicles with trailer hitch, for vehicles without trailer hitch

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 415
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Vehicle type: Roomster
• Engine Code: BXW, CGGB
• Block Separation:
• Material: Aluminium
• Core Length [mm]: 415
• Core Width [mm]: 430
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Name: Radiaator,mootorijahutus
• Manufacturer: MAX

Vehicle Equipment: for vehicles without air conditioning, for vehicles without trailer hitch, for vehicles with trailer hitch

• Engine Code: BXW, CGGB
• Transmission Type: 5-Speed Manual Transmission
• Core Width [mm]: 415
• Core Length [mm]: 430
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Manufacturer: MAGNETI MARELLI
• Name: MM BM851

• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• General Information: radiator and radiator fan for vehicle with heating
• Manufacturer: VIKA

• Radiator type: Mechanically jointed cooling fins
• Heating/Cooling: incl. fan
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 20
• Water Tank Material (radiator): Plastic
• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Packaging width [cm]: 15.5
• Net Weight [g]: 2,590
• Packaging height [cm]: 61.5
• Packaging length [cm]: 90
• Name: Radiaator,mootorijahutus
• Manufacturer: BEH MAH

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.