Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of circuits: 4
- Length [mm]: 526
- Lambda Sensor: Diagnostic Probe
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
-
Fitting Position: Front,
before catalytic converter - Lambda Sensor: Regulating Probe
- Length [mm]: 560
- Number of pins: 4
- Lisainfo: Lambda Sensor
- Additional information: Lambda Sensor
- Lambda Sensor: Lambda Sensor
- Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.14
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0119 - Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"
-
Lambda Sensor: Diagnostic Probe,
Lambda Sensor -
Engine Code: BXW,
CGGB - Voltage [V]: 12
- Length [mm]: 620
- Number of circuits: 4
- Weight [kg]: 0.11
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV029
-
Lambda Sensor: Diagnostic Probe,
Heated - Number of pins: 4
- Cable Length [mm]: 500
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Length [mm]: 513
- Resistor [Ohm]: 6
- Number of circuits: 4
- Conductor Number: 4
- Cable Length [mm]: 513
- Lambda Sensor: Heated
- Manufacturer: MAGNETI MARELLI
- Name: MM OSM077
- Length [mm]: 550
- Number of circuits: 4
- Resistor [Ohm]: 4.5
- Conductor Number: 4
- Cable Length [mm]: 550
- Lambda Sensor: Heated
- Manufacturer: MAGNETI MARELLI
- Name: MM OSM011
-
Lambda Sensor: Regulating Probe,
Finger probe, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 513
- Manufacturer: DELPHI
-
Lambda Sensor: Diagnostic Probe,
Heated - Voltage [V]: 12
- Length [mm]: 595
- Number of circuits: 4
- Weight [kg]: 0.13
- Resistor [Ohm]: 6
- Operating Mode: Electric
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV712
-
Engine Code: BXW,
BXW/ CGGB - Fitting Position: after catalytic converter
- Required quantity: 1
- Length [mm]: 526
- Cable Length [mm]: 570
- Conductor Number: 4
- Supplementary Article/Info 2: with fastening material
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: EP 1.997.600
- Manufacturer: EPS
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased
- Fitting Position: after catalytic converter
-
Lambda Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 520
- Weight [kg]: 0.1
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: after catalytic converter
-
Lambda Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 520
- Weight [kg]: 0.1
- Name: SW 30 93 6892
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Exhaust Manifold
-
Line insulation design: with silicone-
coated woven- fibre insulation - Connector Shape: D Shape
- for OE number: 03C 906 262 T
- Weight [kg]: 0.131
-
Thread Size: M18 x 1,
5 - Number of circuits: 4
- Socket colour: brown
- Overall Length [mm]: 400
- Number of pins: 4
- Number of connectors: 4
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Exhaust System: before catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.2007
- Engine Code: BXW
-
Vehicle Identification Number (VIN) from: 5J-
8- 000 001 - Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Line insulation design: with silicone-
coated woven- fibre insulation - Socket colour: brown
- for OE number: 036 906 262 F
- Length [mm]: 580
- Weight [kg]: 0.148
-
Thread Size: M18 x 1,
5 - Connector Shape: D Shape
- Cable Length [mm]: 570
- Number of pins: 4
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: BXW
- Lambda Sensor: Diagnostic Probe
- Length [mm]: 650
- Number of pins: 4
- Socket colour: black
- Technical Information Number: Universal 77004
- Manufacturer: FAE
-
Engine Code: BXW,
CGGB - Fitting Position: Front
-
Line insulation design: with silicone-
coated woven- fibre insulation - Weight [kg]: 0.142
- Number of circuits: 4
- Connector Shape: D Shape
-
Thread Size: M18 x 1,
5 - for OE number: 036 906 262 AA
- Socket colour: brown
- Length [mm]: 520
- Number of pins: 4
- Number of connectors: 4
- Housing Colour: brown
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Exhaust System: before catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Connector/Clamp: Connector may need adjustment
- Lambda Sensor: Heated
- Number of pins: 4
-
Recommended change interval [km]: 160,
000 - General Information: lambda probe; 4 wire
- Manufacturer: VIKA
-
Lambda Sensor: Regulating Probe,
Diagnostic Probe - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
Fitting Position: before catalytic converter, after catalytic converter
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation - Socket colour: black
- Number of circuits: 4
- Cable Length [mm]: 540
- Connector Shape: D Shape
- Weight [kg]: 0.166
- for OE number: 06A 906 265 AP
-
Thread Size: M18 x 1,
5 - Length [mm]: 680
- Number of pins: 4
- Exhaust System: before catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Quantity: 1
- Cable Length [mm]: 650
- Manufacturer: DELPHI
-
Lisainfo: ES20270-
12B1 -
Additional information: ES20270-
12B1
- Fitting Position: after catalytic converter
- Connector Shape: D Shape
- for OE number: 03D 906 265 B
- Weight [kg]: 0.15
-
Thread Size: M18 x 1,
5 - Socket colour: black
- Number of circuits: 4
- Length [mm]: 650
- Number of pins: 4
- Number of connectors: 4
- Exhaust System: before catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Exhaust System: for pre-
catalytic converter - for OE number: 036906262AA
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 620
- Number of pins: 4
- Weight [g]: 107
- Gross Weight [g]: 138
- Manufacturer: DENSO
- Quality class: Q
- Name: Lambda sensor
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
- Engine Code: BXW
-
Lambda Sensor: Regulating Probe,
Heated - Length [mm]: 520
- Number of pins: 4
- Socket colour: brown
- Technical Information Number: Universal 77004
- Manufacturer: FAE
- for OE number: 036906262D
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 530
- Number of pins: 4
- Weight [g]: 108
- Gross Weight [g]: 139
- Manufacturer: DENSO
Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor
- Lambda Sensor: Regulating Probe
- Number of pins: 4
- Length [mm]: 600
- Housing Colour: brown
- Manufacturer: METZGER
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Thread Size: M18 x 1,
5 - Length [mm]: 530
- Connector Shape: D Shape
- Conductor Number: 4
- Cable Length [mm]: 530
- Number of pins: 4
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Exhaust System: after catalytic converter
- Weight [kg]: 0.146
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Manufacturer: BOSCH
-
Vehicle Identification Number (VIN) from: 5J-
7- 000 001 -
Engine Code: BXW,
CGGB - Fitting Position: after catalytic converter
- Block Separation:
- Lambda Sensor: Heated
- Voltage [V]: 12
- Conductor Number: 4
- Cable Length [mm]: 700
- Manufacturer: PIERBURG
- Lambda Sensor: Heated
- Number of pins: 4
- Cable Length [mm]: 580
- for article number: 81707
- Manufacturer: MEAT&DORIA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks