Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
- Lisainfo: Antud 1 tk hind.
- Additional information: Antud 1 tk hind.
- Fitting Position: Front Axle
- Required quantity: 2
- Height [mm]: 222
- Manufacturer: MAX
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P
- Fitting Position: Rear Axle
- Height [mm]: 160
- Required quantity: 2
-
Name: Kaitsekaan/
kaitsekumm - Vedrustus/ amordid VW T. - Manufacturer: MAX
- Fitting Position: Rear Axle
- Height [mm]: 160
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle
- Bellows Material: Thermoplast
- Height [mm]: 221.5
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 2
- Fitting Position: Rear Axle
- Weight [kg]: 0.041
- Required quantity: 2
- General Information: protective pipe; rear
- Manufacturer: VIKA
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Thickness [mm]: 225
- Material: Thermoplastic polyester elastomer
- Fitting Position: Front Axle
- Weight [kg]: 0.068
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P
- Fitting Position: Rear Axle both sides
- General Information: protective pipe
- Manufacturer: BORSEHUNG
- Thickness [mm]: 225
- Material: Thermoplastic polyester elastomer
- Fitting Position: Front Axle
- Weight [kg]: 0.068
- Name: SW 30 60 0038
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 2
- Fitting Position: Front Axle
- Material: Thermoplastic polyester elastomer
- Thickness [mm]: 225
- Weight [kg]: 0.068
- Required quantity: 2
- General Information: protective pipe; front
- Manufacturer: VIKA
- for OE number: 1J0513425
- Fitting Position: Rear Axle
- Height [mm]: 162
- Required quantity: 2
- Material: Thermoplast
- Weight [g]: 57
- Diameter 1 [mm]: 36
- Diameter 2 [mm]: 56
- Name: IM 37265
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Height [mm]: 221.5
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/P
- Fitting Position: Front Axle both sides
- General Information: dust boot
- Manufacturer: BORSEHUNG
- for OE number: 1J0513425A
- Fitting Position: Rear Axle
- Height [mm]: 180
- Required quantity: 2
- Material: Thermoplast
- Weight [g]: 58
- Diameter 1 [mm]: 37
- Diameter 2 [mm]: 56
- Name: IM 37372
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Height [mm]: 160
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid SKODA T OCTAVIA
- Fitting Position: Front
- Length [mm]: 210
- Weight [kg]: 0.08
- Material: Rubber
- Weight [g]: 80
- Inner Diameter 1 [mm]: 18
- Inner Diameter 2 [mm]: 71
- Manufacturer: METALCAUCHO
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: LMI
Vehicle Identification Number (VIN) from: 5J-9A508 237, 5J-9B505 016, 5J-9K506 834, 5J-93120 133 SVHC: No information available, please contact the manufacturer! Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. GOLF/PASSAT/VENTO
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Design: Telescopic Shock Absorber
- Name: CFD 564336
- Manufacturer: DACO
Suspension: for vehicles with standard suspension, for vehicles without lowered suspension, for vehicles without sports suspension, for vehicles without bad road version
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Fitting Position: Rear Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Lisainfo: DSF036G DKM
- Additional information: DSF036G DKM
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version, for vehicles without lowered suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Article number of recommended accessories: SMA0132
- Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: ASHIKA
-
Lisainfo: MA-
00034 -
Additional information: MA-
00034
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Design: Telescopic Shock Absorber
- Name: CFD 564778
- Manufacturer: DACO
Suspension: for vehicles without lowered suspension, for vehicles without sports suspension, for vehicles with bad road version, for vehicles without standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Article number of recommended accessories: SMJ0132
- Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: JAPKO
- not for trim level: strade sconnesse
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: JAPKO
- Lisainfo: MJ00030 JAPKO
- Additional information: MJ00030 JAPKO
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Manufacturer: KAVO
Suspension: for vehicles with bad road version, for vehicles without standard suspension, for vehicles without sports suspension, for vehicles without lowered suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Damper without Rebound Spring
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: 72-
2424 - Name: AMORT
- Manufacturer: MAX
Suspension: for vehicles with bad road version, for vehicles without standard suspension, for vehicles without sports suspension, for vehicles without lowered suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Name: Gas shock absorber
- Quality class: PJ
Lisainfo: "Tootja: SRL
SKODA FABIA 00-
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Oil Pressure
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Length 1 [mm]: 648
- Length 2 [mm]: 400
-
Shock Absorber System: Twin-
Tube - Name: Gas shock absorber
- Quality class: PJ
Suspension: for vehicles without standard suspension, for vehicles without lowered suspension, for vehicles without sports suspension, for vehicles with bad road version
Lisainfo: "Tootja: SRL
OCTAVIA/GOLF IV
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
OCTAVIA/GOLF IV
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Manufacturer: JP GROUP
- Lisainfo: Shock Absorber
- Additional information: Shock Absorber
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version, for vehicles without lowered suspension
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Damper without Rebound Spring
-
Shock Absorber System: Twin-
Tube - Name: Amort
- Manufacturer: MAX
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version, for vehicles without lowered suspension
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH - Name: GH 309915
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: 72-
2424 - Name: AMORT
- Manufacturer: MAX
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH - Name: GH 339915
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Name: CFD 454345
- Manufacturer: DACO
Suspension: for vehicles with standard suspension, for vehicles with lowered suspension, for vehicles with sports suspension, for vehicles with bad road version
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Oil Pressure
- Shock Absorber Mounting Type: Top pin
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Oil Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Manufacturer: KAMOKA AMORTYZATORY
- not for trim level: strade sconnesse
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: JPA
-
Lisainfo: MM-
00030 -
Additional information: MM-
00030
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Article number of recommended accessories: SM0132
- Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: JPA
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube - Name: Amort
- Manufacturer: MAX
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Oil Pressure
- Shock Absorber Mounting Type: Bottom Pin
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Rear Axle
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Spring Type: for vehicles with coil spring suspension
- Manufacturer: MAGNETI MARELLI
- Name: MM 4312G
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 1.6
- Bore Ø [mm]: 25
- Length 1 [mm]: 420
- Length 2 [mm]: 631
- Piston Rod Diameter [mm]: 11
-
Article number of recommended accessories: MK118,
PK078 - Packaging length [cm]: 60
- Packaging width [cm]: 7.2
- Packaging height [cm]: 7.2
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
-
Fitting Position: Rear Axle,
Rear Axle Right, Rear Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694706 - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Manufacturer: AUTO-
GH
- Suspension: for vehicles with lowered suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Diameter [mm]: 39
- Length 1 [mm]: 633
- Length 2 [mm]: 396
- Piston Rod Diameter [mm]: 12
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Article number of recommended accessories: 100 513 1001
- replacement in pairs recommended:
- Name: AMORT
- Manufacturer: MEY
- Suspension: for vehicles with bad road version
- Check OE number:
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Length 1 [mm]: 633
- Length 2 [mm]: 411
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Article number of recommended accessories: 100 513 1001
- replacement in pairs recommended:
- Name: Amort
- Manufacturer: MEY
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: SMJ0144,
SMJ0145 - Shock Absorber Mounting Type: Top pin
- Manufacturer: JAPKO
- Quantity: 2
- Fitting Position: Rear Axle
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - General Information: shock absorber; rear; gas
- Manufacturer: VIKA
- Quantity: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Suspension Strut
- General Information: shock absorber; rear; oil
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Suspension: for vehicles with sports suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Bottom Pin
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
-
Lisainfo: Suspension strut,
complete, front -
Additional information: Suspension strut,
complete, front
- Fitting Position: Rear Axle
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Spring Type: for vehicles with coil spring suspension
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Rear Axle
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version, for vehicles without lowered suspension
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: BIL
Lisainfo: "Tootja: BILSTEIN
SKODA FABIA 02-
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Length 1 [mm]: 632
- Length 2 [mm]: 385
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version, for vehicles without lowered suspension General Information: Please refer to the technical drawing in "Documents"
- Fitting Position: Front Axle
- Suspension: for vehicles with lowered suspension
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Parameter: ST32/
22X149A - Shock Absorber Mounting Type: Top pin
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: KAYABA AMORTYZATORY
- Name: KY 343485
Suspension: for vehicles with sports suspension, for vehicles with lowered suspension, for vehicles without standard suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Design: Telescopic Shock Absorber
- Parameter: SEOV27X213A
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Suspension: for vehicles with lowered suspension
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Name: AMORT
- Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 100 412 2038,
100 412 2038/ S - replacement in pairs recommended:
- Name: Amort
- Manufacturer: MEY
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Article number of recommended accessories: 100 412 2038,
100 412 2038/ S, 100 640 0008 - replacement in pairs recommended:
- Name: AMORT
- Manufacturer: MEY
- Fitting Position: Front Axle
-
Article number of recommended accessories: MK077,
PK076, MK156, PK012 - Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Clamp - Weight [kg]: 3.9
- Bore Ø [mm]: 32
- Length 1 [mm]: 360
- Length 2 [mm]: 510
- Piston Rod Diameter [mm]: 22
- Packaging length [cm]: 51.5
- Packaging width [cm]: 16.2
- Packaging height [cm]: 16.2
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Telescopic Shock Absorber
- Length 1 [mm]: 648
- Length 2 [mm]: 400
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with bad road version, for vehicles without standard suspension, for vehicles without sports suspension, for vehicles without lowered suspension General Information: Please refer to the technical drawing in "Documents"
- Fitting Position: Rear Axle
- Trim Level: Monte Carlo
- Suspension: for vehicles with sports suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Weight [kg]: 0.86
- Length 1 [mm]: 420
- Length 2 [mm]: 616
-
Article number of recommended accessories: MK118,
PK078 - Packaging length [cm]: 60
- Packaging width [cm]: 7
- Packaging height [cm]: 7.2
- Manufacturer: MONROE
Warranty: 5 years warranty with accessories when replaced in pairs
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with lowered suspension
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Spring Type: for vehicles with coil spring suspension
- Manufacturer: MAGNETI MARELLI
- Name: MM 4311G
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left - Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Article number of recommended accessories: GH-
694702 - Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Mounting Type: Top pin
-
Manufacturer: AUTO-
GH
-
Vehicle Identification Number (VIN) to: 5J-
93120132 -
for PR number: G04,
G41, G03, G02 - Block Separation:
- Fitting Position: Front Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube -
Thread Size: M14x1,
5 - Piston Rod Length [mm]: 212
- Piston Rod Diameter [mm]: 22
-
Article number of recommended accessories: AK-
735004, AK- 735410 - Suspension Strut Outer Diameter [mm]: 50
- Manufacturer: OPTIMAL ZAWIESZENIE
Suspension: for vehicles with lowered suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with standard suspension
- Quantity: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Bottom eye
- Shock Absorber Design: Telescopic Shock Absorber
-
General Information: gas-
filled shock absorber; rear - Manufacturer: BORSEHUNG
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
-
Shock Absorber System: Twin-
Tube - Name: AMORT
- Manufacturer: BIL
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
AUDI A2/POLO/FABIA
(kvaliteediklass: Q)"
- Quantity: 2
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Bottom eye,
Top pin -
General Information: gas-
filled shock absorber; rear - Manufacturer: BORSEHUNG
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Diameter [mm]: 50
- Length 1 [mm]: 510
- Length 2 [mm]: 355
- Piston Rod Diameter [mm]: 20
- Quantity per axle: 1
- Observe technical data:
- Manufacturer: TRW AMORTYZATORY
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
-
Parameter: SF32/
22X150A - Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Oil Pressure
- Shock Absorber Mounting Type: Top pin
- Name: AMORT
- Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Name: Gas shock absorber
- Quality class: Q
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Name: AMORT
- Manufacturer: KYB
Suspension: for vehicles with standard suspension, for vehicles without sports suspension, for vehicles without bad road version, for vehicles without lowered suspension
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber System: Monotube
- Name: AMORT
- Manufacturer: BIL
Additional information: "Tootja: BILSTEIN
AUDI/ SEAT/ SKODA/VW
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI/ SEAT/ SKODA/VW
(kvaliteediklass: Q)"
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Top pin
- Manufacturer: KAYABA
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with lowered suspension
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber System: Monotube
- Name: AMORT
- Manufacturer: BIL
- Quality class: Q
Additional information: "Tootja: BILSTEIN
AUDI/ SEAT/ SKODA/VW
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI/ SEAT/ SKODA/VW
(kvaliteediklass: Q)"
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber System: Single Tube Upside Down
- Manufacturer: BILSTEIN
- Name: Sport shock absorber
- Quality class: Q
Additional information: "Tootja: BILSTEIN
AUDI/SEAT/SKODA
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
AUDI/SEAT/SKODA
(kvaliteediklass: Q)"
- Suspension: for vehicles with sports suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber System: Single Tube Upside Down
-
Name: BI 35-
052180 - Manufacturer: BILSTEIN
- Quality class: Q
Additional information: "Tootja: BILSTEIN
VW POLO (9N/)
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
VW POLO (9N/)
(kvaliteediklass: Q)"