Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Engine Code: BLS,
BXE - Construction Year to: 08.2010
- Block Separation:
- Fitting Position: Upper
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 91
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
- Fitting Position: Upper
- Width [mm]: 91
- Height [mm]: 35.5
- Weight [kg]: 0.255
- Thread Size: M14x1.5
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 255
- Manufacturer: METALCAUCHO
- Construction Year to: 08.2010
- Fitting Position: Upper
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount,
gearbox, upper -
Additional information: Rubber mount,
gearbox, upper
- Fitting Position: Lower
- Manufacturer: JP GROUP
-
Lisainfo: Rubber mount,
gearbox, lower, rear -
Additional information: Rubber mount,
gearbox, lower, rear
- Fitting Position: Lower
- Weight [kg]: 0.235
- Outer Diameter [mm]: 91
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 235
- Manufacturer: METALCAUCHO
- Fitting Position: Rear
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: DELLO AUTOMEGA
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: BLS,
BXE - Construction Year to: 08.2010
- Block Separation:
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear
- Weight [kg]: 0.739
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Seerianumber: ZPS-
VW- 101 - Installatsiooni pool: vasakul
-
Laagritüüp: Kummi-
metalllaager - OE-numbri jaoks: 3C0199555Q
-
paaris tootenumbrid: ZPS-
VW- 100 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Left,
Right - Mounting Type: Hydro Mount
- Weight [g]: 533
- Name: IM 37249
- Manufacturer: ORIGINAL IMPERIUM
-
Transmission Type: 5-
Speed Manual Transmission - Fitting Position: Left
- Mounting Type: Hydro Mount
- Manufacturer: JP GROUP
-
Lisainfo: Rubber mount,
gearbox, rear, left -
Additional information: Rubber mount,
gearbox, rear, left
-
Transmission Type: 5-
Speed Manual Transmission -
Mounting Type: Rubber-
Metal Mount - Fitting Position: Left
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Left
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 1.9
-
Name: PAIGUTUS,
KIGUKAST - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Left
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 1.9
- Name: SW 32 92 2724
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: transmission sided,
Left Rear - Required quantity: 1
-
Material: Rubber/
Metal -
Weight [g]: 1,
900 - Name: IM 32404
- Manufacturer: ORIGINAL IMPERIUM
-
Vehicle Identification Number (VIN) from: 3T-
8- 000 001 - Fitting Position: Left
- Weight [kg]: 2.1
- Name: COC 80001235
- Manufacturer: CORTECO
- Production date from: 20.09.2010
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Left
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Production date from: 20.09.2010
- Engine Code: BXE
- Fitting Position: Left
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks