• Fitting Position: Front Axle, Left
• Manufacturer: GSP

• Fitting Position: Rear, Upper
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

Transmission Type: 6-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission

• Fitting Position: Upper
• Manufacturer: DELLO AUTOMEGA

• for PR number: T9G, TD6, TE6, TG0, TG3, TJ2, TL4, TP0
• Model Year to: 2013
• Fitting Position: Rear
• Weight [kg]: 0.145
• Supplementary Article/Supplementary Info: without holder
• Packaging length [cm]: 13.2
• Packaging width [cm]: 5.2
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Left
• Manufacturer: GSP

• Fitting Position: Front Axle, Left
• Manufacturer: GSP

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper
• Outer Diameter [mm]: 91
• Manufacturer: MERTZ

• Fitting Position: Upper
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 91
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Lower
• for OE number: 1K0 199 867
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Left
• for OE number: 1K0199868P
• Manufacturer: GSP

• Fitting Position: Lower
• Mounting Type: Rubber-Metal Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Weight [kg]: 0.25
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 91.9
• Required quantity: 1
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper
• Manufacturer: TEDGUM

• Weight [kg]: 0.232
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 91.8
• Inner Diameter [mm]: 15.5
• Required quantity: 1
• Fitting Position: Lower
• Manufacturer: TEDGUM

• Fitting Position: Upper
• Outer Diameter [mm]: 91
• Mounting Type: Rubber-Metal Mount
• Fabrication Number: ZTP-VW-001E
• Manufacturer: NTY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear, Upper
• for OE number: 1K0 199 868 P
• Manufacturer: KAMOKA

• Fitting Position: Rear, Upper
• Manufacturer: CORTECO
• Name: COC 80001310

• Fitting Position: Front Axle, Upper
• Width [mm]: 92
• Height [mm]: 36
• Manufacturer: FAST

• Fitting Position: Rear
• Inner Diameter [mm]: 36
• Outer Diameter [mm]: 92
• Manufacturer: 3RG

• Fitting Position: Right Front
• Weight [g]: 237
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 92
• Length [mm]: 34
• Manufacturer: IMP

Name: PODUSZKA SIL. AUDI A3, Q3, TT, SEAT ALHAMBRA, ALTEA, ALTEA XL, LEON, TOLEDO, SKODA OCTAVIA, SUPERB, YETI, VW CADDY, CC, EOS 05.03-11.22

• Fitting Position: Rear, Lower
• Manufacturer: BGA

• Fitting Position: Upper
• Required quantity: 1
• Weight [g]: 269
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 91
• Length [mm]: 36
• Manufacturer: IMP

Name: PODUSZKA SIL. AUDI A3, A4, Q3, TT, SEAT LEON, TOLEDO, SKODA OCTAVIA, SUPERB, YETI, VW CADDY, EOS, FOX, GOLF, PASSAT, SCIROCCO 08.97-12.22

• Fitting Position: Front Axle, Lower
• Width [mm]: 91
• Height [mm]: 36
• Inner Diameter [mm]: 15
• Manufacturer: FAST

• Fitting Position: Left Rear, Upper, Right Rear, Lower
• Mounting Type: soft version
• Weight [g]: 234
• Shore-A hardness value, base body: 47
• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 91
• Length [mm]: 36
• Name: Paigutus,Mootor
• Manufacturer: IMP

• Fitting Position: Front Axle, Left
• for OE number: 1K0 199 855 AE
• Manufacturer: GSP

• Fitting Position: Rear, Upper
• for OE number: 1K0 199 868 A, 1K0 199 868 Q
• Name: PAIGUTUS,MOOTOR
• Manufacturer: LMI

Transmission Type: 6-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear, Lower
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: Torque Support
• Required quantity: 1
• Quantity Unit: Piece
• paired article number: 100 199 0162
• Name: PAIGUTUS,ABIRAAM/AGREGAADITALA
• Manufacturer: MEY
• Lisainfo: 1001990161
• Additional information: 1001990161

• Fitting Position: Upper, Rear
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: Torque Support
• Required quantity: 1
• Quantity Unit: Piece
• paired article number: 100 199 0161
• Name: PAIGUTUS,ABIRAAM/AGREGAADITALA
• Manufacturer: MEY
• Lisainfo: 1001990162
• Additional information: 1001990162

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear
• Material: Rubber/Metal
• Manufacturer: MERTZ

• Fitting Position: Rear, Lower
• Manufacturer: CORTECO
• Name: COC 80001306

• Fitting Position: Rear Axle
• General Information: bonded rubber bush; rear
• Manufacturer: BORSEHUNG

• Engine Code: CBBB, CFGB
• Construction Year to: 08.2010
• Block Separation:
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Length [mm]: 312
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Fitting Position: Rear, Lower
• Transmission Type: Automatic Transmission
• Fabrication Number: ZPS-VW-020
• Manufacturer: NTY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear
• Manufacturer: KAMOKA
• Additional information: 890246 NISS
• Lisainfo: 890246 NISS

• Construction Year from: 05.2009
• Construction Year to: 08.2010
• Fitting Position: Left Front
• Supplementary Article/Info 2: with rubber mount
• Lisainfo: Rubber mount, engine support, left
• Additional information: Rubber mount, engine support, left

• Construction Year from: 05.2009
• Construction Year to: 08.2010
• Fitting Position: Right Front
• Supplementary Article/Info 2: with rubber mount
• Lisainfo: Rubber mount, engine support, right
• Additional information: Rubber mount, engine support, right

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Net weight [kg]: 0.61
• Name: Paigutus,Mootor
• Manufacturer: NK

• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount, engine support, rear
• Additional information: Rubber mount, engine support, rear

• Fitting Position: Rear
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Manufacturer: BGA

• Construction Year to: 08.2010
• Fitting Position: Rear
• Weight [kg]: 0.59
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 590
• Manufacturer: METALCAUCHO

• Production date to: 01/08/10
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• for OE number: 1K0199855BJ
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Fitting Position: Lower
• for OE number: 1K0 199 867 A, 1K0 199 867 Q
• Name: PAIGUTUS,MOOTOR
• Manufacturer: LMI

Transmission Type: 6-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission SVHC: No information available, please contact the manufacturer!

• for OE number: 1K0199855L
• Fitting Position: Rear
• Required quantity: 1
• Weight [g]: 606
• Name: Paigutus,Mootor
• Manufacturer: IMP
• Additional information: F37274
• Lisainfo: F37274

• Fitting Position: Front
• General Information: pendulum support
• Manufacturer: BORSEHUNG

• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.632
• Fitting Position: Rear
• Material: Rubber/Metal
• Required quantity: 1
• General Information: support for front axle beam
• Manufacturer: VIKA

• Fitting Position: Lower, Rear
• Quality: OE Exact
• Operating Mode: Manual
• Colour: silver
• Weight [g]: 593
• Manufacturer: GATES

• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.581
• Fitting Position: Rear
• Material: Rubber/Metal
• Required quantity: 1
• General Information: support for front axle beam; MT
• Manufacturer: VIKA

• Fitting Position: Rear
• Name: COC 80001307
• Manufacturer: CORTECO

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear
• Weight [kg]: 0.739
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CBBB, CFGB
• Construction Year to: 08.2010
• Block Separation:
• Material: Rubber/Metal
• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.632
• Observe service information:
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• General Information: pendulum support
• Manufacturer: BORSEHUNG

• Fitting Position: Rear
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: Torque Support
• Length [mm]: 314.1
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Left Front
• for OE number: 1K0 199 555 T
• Manufacturer: MERTZ

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Left Front
• for OE number: 3C0 199 555 R
• Manufacturer: MERTZ

• Fitting Position: Left
• Fabrication Number: ZPS-VW-018
• Manufacturer: NTY

Transmission Type: Manual Transmission, Automatic Transmission, 6-Speed Manual Transmission, Semi-automatic

• Transmission Type: Manual Transmission
• paired article number: 40-0103
• Fitting Position: Left
• Mounting Type: Rubber-Metal Mount
• for OE number: 1K0 199 555 T
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Mounting Type: Hydro Mount
• Fitting Position: Left
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Fitting Position: Front Axle, Right
• Manufacturer: GSP

• Mounting Type: Hydro Mount
• Fitting Position: Right
• for OE number: 1K0 199 262 CB
• Manufacturer: MERTZ

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Left
• for OE number: 1K0 199 555 T
• Manufacturer: KAMOKA

• Fitting Position: Lower, Rear
• Manufacturer: DELPHI
• Name: DE TEM101

• for OE number: 5ND199555B
• Fitting Position: Left Front
• Weight [g]: 1,849
• Name: Paigutus,Mootor
• Manufacturer: IMP

• Fitting Position: Left, Front
• Transmission Type: Manual Transmission, Automatic Transmission
• Block Separation:
• Name: DE TEM196
• Manufacturer: DELPHI

• Production date to: 01/08/10
• Mounting Type: Rubber-Metal Mount
• Fitting Position: transmission sided, Upper Left
• for OE number: 1K0199555S
• Manufacturer: SASIC

• Mounting Type: Rubber-Metal Mount
• Fitting Position: engine sided, Right
• for OE number: 1K0199262CB
• Name: Kinnitus,mootor
• Manufacturer: MAX

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Left
• General Information: gearbox mounting
• Manufacturer: VIKA

• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 1.84
• Fitting Position: Left
• Required quantity: 1
• General Information: gearbox mounting
• Manufacturer: VIKA

• Transmission Type: Automatic Transmission
• Fitting Position: Left
• Mounting Type: Rubber-Metal Mount
• Required quantity: 1
• Quantity Unit: Piece
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Fitting Position: Right
• Weight [kg]: 1.918
• Mounting Type: Hydro Mount
• Weight [g]: 1,918
• Manufacturer: METALCAUCHO

• Transmission Type: 6-Speed Dual-Clutch Transmission
• Mounting Type: Hydro Mount
• Fitting Position: Left
• for OE number: 1K0 199 555 Q
• Name: PAIGUTUS,MOOTOR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Transmission Type: Manual Transmission
• Fitting Position: Left Front
• Mounting Type: Rubber-Metal Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• for OE number: 1K0199262CB
• Fitting Position: Left Front
• Weight [g]: 1,935
• Name: Paigutus,Mootor
• Manufacturer: IMP

• Production date from: 06/08
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Upper Right
• for OE number: 1K0199262CB
• Name: KINNITUS,MOOTOR
• Manufacturer: SAS

• Fitting Position: Right
• Mounting Type: Hydro Mount
• Manufacturer: METZGER

• Construction Year from: 05.2013
• Fitting Position: Right
• Mounting Type: Hydro Mount
• Weight [kg]: 1.921
• for OE number: 1K0 199 262 CB
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Additional information: F176346
• Lisainfo: F176346

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.