Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: CFHC
- Model Year from: 2014
- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- Sensor Type: NTC Sensor
- Mounting Type: Clipped
- Component Number: G17
-
Name: Andur,
vlistemperatuur - Manufacturer: HAN
Housing material: Plastic, GRP (Glass fibre Reinforced Plastic), Polyamid 6.6 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CFHC
- Model Year from: 2014
- Fitting Position: outer
-
Name: Andur,
vlistemperatuur - Manufacturer: MAX
- Engine Code: CFHC
- Model Year to: 2013
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV703
- Model Year from: 2014
- Fitting Position: Front
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV702
- Engine Code: CFHC
- Model Year to: 2013
- Number of pins: 2
- for OE number: 8Z0 820 535
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- General Information: temperature sensor
- Manufacturer: VIKA
- Sensor Type: NTC Sensor
- Number of pins: 2
- Connector Shape: D Shape
- Manufacturer: ERA
- Vehicle Equipment: for vehicles with automatic climate control
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Housing Colour: grey
- Connector Shape: rectangular
- Manufacturer: ERA
- Engine Code: CFHC
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Manufacturer Restriction: DENSO
- Number of pins: 2
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Connector Shape: angular
- Fitting Position: Air duct
- Housing material: PA 66 GF 30
-
Component Number: G 263,
G 308 - Vehicle Equipment: for vehicles with air conditioning
-
Shape: Off-
set - Mounting Type: Clipped
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Diameter [mm]: 25
- Height [mm]: 52
- Weight [kg]: 0.08
- Number of connectors: 2
- Manufacturer: VEMO GERMANY
Vehicle Equipment: for vehicles with air conditioning (manually controlled) General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
- Vehicle Equipment: for vehicles with automatic climate control
- for OE number: 1K0907543G
- Manufacturer: MEAT&DORIA
- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Weight [kg]: 0.02
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Model Year to: 2013
- Length [mm]: 36
- Width [mm]: 17
- Height [mm]: 13
- Weight [kg]: 0.035
- Vehicle Equipment: for vehicles with air conditioning
- Number of pins: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- General Information: interior temperature sensor
- Manufacturer: BORSEHUNG
- Model Year from: 2014
- Manufacturer Restriction: VALEO
- Number of pins: 2
- Weight [kg]: 0.073
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Model Year from: 2014
- Manufacturer Restriction: VALEO
- Number of pins: 2
- Vehicle Equipment: for vehicles with automatic climate control
- Fitting Position: Left
- Manufacturer: METZGER
- Number of pins: 2
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Vehicle Equipment: for vehicles with air conditioning
- Manufacturer Restriction: DENSO
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Fitting Position: to interior blower,
Lower - Shape: angled
- Manufacturer: METZGER
- Voltage [V]: 12
- Vehicle Equipment: for vehicles with air conditioning
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks