Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Jämedus/Tugevus (mm): 4
- Siseläbimõõt [mm]: 32
- Värv: must
-
Materjal: NBR
(Nitril- Butadien- Kautschuk) -
Kaal (kg): 0,
001 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 32
- Thickness [mm]: 4
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: METZGER
- Cooling Hose: from oil cooler to engine block
- Manufacturer: METALCAUCHO
- Jämedus/Tugevus (mm): 4
- Siseläbimõõt [mm]: 38
- Välisläbimõõt [mm]: 46
-
Materjal: NBR
(Nitril- Butadien- Kautschuk) -
Kaal (kg): 0,
002 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Seerianumber: CTM-VW-068
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Jahutustorustik: jagamisosast lisaveepumpa
-
Kaal (kg): 0,
045 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Materjal: Plastik
-
Seerianumber: CTM-
VW- 057 - Manufacturer: NTY
- Pikkus (mm): 26
- Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 23
- Jahutustorustik: õliradiaatorist silindriplokki
-
Materjal tihend: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Värv: must
- Materjal: Plastik
-
Kaal (kg): 0,
062 - Piirangutega toode/piirangu info: koos tihenditega
- Name: SW 33 10 1092
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 26
- Siseläbimõõt [mm]: 13
- Välisläbimõõt [mm]: 23
- Jahutustorustik: õliradiaatorist silindriplokki
-
Materjal tihend: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Värv: must
- Materjal: Plastik
-
Kaal (kg): 0,
062 - Piirangutega toode/piirangu info: koos tihenditega
- Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Kaal (kg): 0,
012 -
pakendi pikkus [cm]: 2,
6 -
pakendi laius [cm]: 2,
3 -
pakendi kõrgus [cm]: 2,
3 - Manufacturer: FEBEST
- General Information: coolant hose
- Manufacturer: VIKA
- Üldine informatsioon: coolant hose
- Manufacturer: BORSEHUNG
- Quantity per packing unit: 6
- Manufacturer: 3RG
- Cooling Hose: from oil cooler to water pump
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: METZGER
- jälgida süsteemi mahutavust:
- Edasi-/tagasikäik: tagasijooksu jaoks
- Vooliku tüüp: Eelvormitud voolik
- Piirangutega toode/piirangu info: koos hoidjaga
- pikkus üle kõige (mm): 200
- Jahutustorustik: võrdustusanumast veetorusse
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- General Information: coolant hose
- Manufacturer: VIKA
- Quantity: 1
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- Quantity: 1
- General Information: coolant pipe
- Manufacturer: VIKA
- General Information: coolant pipe
- Manufacturer: VIKA
- Material, 2nd layer: Polyester
- Weight [g]: 310
- Manufacturer: METALCAUCHO
Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber) Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- General Information: coolant hose
- Manufacturer: VIKA
- Quantity: 1
- Construction Year from: 12.2011
- Construction Year to: 12.2011
- Fitting Position: Upper
- General Information: coolant hose; rubber
- Manufacturer: VIKA
- for PR number: 9M0
- Fitting Position: Engine Compartment
- Manufacturer: METZGER
- Materjal: Raud
- Üldine informatsioon: coolant pipe; iron
- Manufacturer: BORSEHUNG
- Material: Plastic
- General Information: coolant pipe; plastic
- Manufacturer: VIKA
- OE-numbri jaoks: 1K0122157HH
- Materjal: Kumm
- Piirangutega toode/piirangu info: koos toruotsakutega
- Kaal (g): 306
- Pikkus (mm): 442
- Name: IM 229016
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Upper
-
Transmission Type: Manual Transmission,
Automatic Transmission - Block Separation:
- for OE number: 1K0122101KR
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Värv: must
- vooliku pikkus [mm]: 490
- Siseläbimõõt 1 [mm]: 30
- Siseläbimõõt 2 (mm): 40
- jälgida juhiseid:
- Manufacturer: GATES
- Construction Year to: 11.2011
- Fitting Position: Lower
-
Climate Zones: not for hot climate zones,
for hot climate zones - Block Separation:
-
Materjal: EPDM
(Etüleen- Propüleen- Dieen- Kautsuk) - Värv: must
- vooliku pikkus [mm]: 655
- Siseläbimõõt 1 [mm]: 38
- Siseläbimõõt 2 (mm): 30
- jälgida juhiseid:
- Manufacturer: GATES
- General Information: coolant pipe
- Manufacturer: VIKA
- Cooling Hose: from thermostat to radiator
- Fitting Position: Upper Left
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from expansion tank to engine cooler
- Material: Metal
- Manufacturer: METZGER
- Quantity per packing unit: 7
- Manufacturer: 3RG
- Cooling Hose: from expansion tank to water pipe
- Materjal: Metall
- Värv: must
- Toru pikkus [mm]: 840
- Siseläbimõõt 1 [mm]: 6
- Siseläbimõõt 2 (mm): 6
- Manufacturer: GATES
- Production date to: 06.11.2011
-
for PR number: 8Z4,
8Z5, 8Z6, 8Z7, 8Z9 - Block Separation:
- Transmission Type: Manual Transmission
- Cooling Hose: from coolant regulator housing to engine cooler
- Fitting Position: Lower Left
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: Turbocharger to piping
- Fitting Position: Exhaust Turbocharger
- Forward- /Backflow: Supply Line
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks