Passenger cars • SUBARU • LEGACY I Estate (BC, BF, BJ) • LEGACY I Estate (BC, BF, BJ) 1800 4WD (BF3) (EJ18 SPI) (01.1989 - 07.1994) • Joint/Set - LakiNet

Passenger cars SUBARU LEGACY I Estate (BC, BF, BJ) LEGACY I Estate (BC, BF, BJ) 1800 4WD (BF3) (EJ18 SPI) (01.1989 - 07.1994) Joint/Set

Assembly categories

Filters Brake System Axle Steering Cooling / AC Electrics Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior Service

Product

Description

In stock

Price

(incl. VAT)

856004
Joint Kit, drive shaft

GSP

Construction Year from: 05.1989
Construction Year to: 12.1993
Fitting Position: Front Axle Left, Front Axle Right
Length [mm]: 155
Thread Size: M22X1,5
External Toothing wheel side: 27
Internal Toothing wheel side: 30
Sealing Ring Diameter [mm]: 56
Manufacturer: GSP

Tellitav

1

20.87

Kaup on euroopa kesklaos. Tellimuse saadame 17.00

Tellitav 1p

11

26.02

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Orderable

4

33.11

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

856005
Joint Kit, drive shaft

GSP

Construction Year from: 05.1989
Construction Year to: 12.1993
Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
Length [mm]: 153
Thread Size: M22X1,5
External Toothing wheel side: 27
Internal Toothing wheel side: 22
Sealing Ring Diameter [mm]: 56
Technical Information Number: Six balls
Manufacturer: GSP

Tellitav 1p

8

28.05

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Orderable

3

37.28

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

49-0394
Joint Kit, drive shaft

MAXGEAR

Fitting Position: Front Axle, Wheel Side
Engine Code: EJ18 SPI
Transmission Type: Manual Transmission
External Toothing wheel side: 27
Internal Toothing wheel side: 22
Sealing Ring Diameter [mm]: 56
Joint Type: CV Joint
Drive Shaft: without ABS ring
Length [mm]: 153
Name: LIIGENDLAAGER, VEOVOLL
Manufacturer: MAX

Ord. 1 b-day

2

23.73

Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00

Additional information OE codes Linked vehicles

KSU405
Joint Kit, drive shaft

LPR

Transmission Type: Manual Transmission
Fitting Position: Wheel Side, Front Axle
Sealing Ring Diameter [mm]: 56
Outer Diameter [mm]: 87.9
External Toothing wheel side: 27
Internal Toothing wheel side: 30
Manufacturer: LPR

Ord. 1 b-day

10

25.55

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00

Additional information OE codes Linked vehicles

NPZ-SB-014
Joint Kit, drive shaft

NTY

Fitting Position: Wheel Side
External Toothing wheel side: 27
Internal Toothing wheel side: 30
Sealing Ring Diameter [mm]: 56
Outer Diameter [mm]: 87
Fabrication Number: NPZ-SB-014
Manufacturer: NTY

Ord. 2-3 b-days

5

26.41

0 laoseisuga toote tarneaega kindlasti enne tellimist täpsustada 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

Orderable

3

33.23

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

49-0395
Joint Kit, drive shaft

MAXGEAR

Fitting Position: Wheel Side, Front Axle
Construction Year to: 12.1991
Transmission Type: Manual Transmission
Thread Size: M22 x 1,5
Internal Toothing wheel side: 30
External Toothing wheel side: 27
Sealing Ring Diameter [mm]: 56
Bellows Material: Rubber
Outer Diameter [mm]: 87.9
Name: LIIGENDLAAGER, VEOVOLL
Manufacturer: MAX

Ord. 1 b-day

9

26.77

Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00

Additional information OE codes Linked vehicles

NPZ-SB-013
Joint Kit, drive shaft

NTY

Fitting Position: Front Axle Left, Front Axle Right
Transmission Type: Manual Transmission, Automatic Transmission
Fabrication Number: NPZ-SB-013
Manufacturer: NTY

Ord. 2-3 b-days

5

27.47

0 laoseisuga toote tarneaega kindlasti enne tellimist täpsustada 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

Orderable

2

39.88

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

KSU406
Joint Kit, drive shaft

LPR

Transmission Type: Automatic Transmission
Fitting Position: Wheel Side, Front Axle
Outer Diameter [mm]: 83
External Toothing wheel side: 27
Internal Toothing wheel side: 22
Sealing Ring Diameter [mm]: 56
Manufacturer: LPR

Ord. 1 b-day

9

27.50

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00

Additional information OE codes Linked vehicles

62707
Joint Kit, drive shaft

JAPKO

Fitting Position: Wheel Side, Front
Overall Length [mm]: 153
Length 1 [mm]: 87
Sealing Ring Diameter [mm]: 56
Internal Toothing wheel side: 22
External Toothing wheel side: 27
External Thread [mm]: 22 x 1,5
Specification: Groove type: MIDDLE
Manufacturer: JAPKO

Orderable

3

28.07

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

62-07-707
Joint Kit, drive shaft

ASHIKA

Fitting Position: Wheel Side, Front
Overall Length [mm]: 153
Length 1 [mm]: 87
Sealing Ring Diameter [mm]: 56
Internal Toothing wheel side: 22
External Toothing wheel side: 27
External Thread [mm]: 22 x 1,5
Specification: Groove type: MIDDLE
Manufacturer: ASHIKA

Tellitav 1p

4

28.65

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

771 0352 30
Joint Kit, drive shaft

Schaeffler FAG

Fitting Position: Wheel Side
Transmission Type: Automatic Transmission
Joint Type: CV Joint
External Toothing wheel side: 27
Internal Toothing wheel side: 22
Sealing Ring Diameter [mm]: 56
Outer Diameter [mm]: 83
SVHC: No SVHC present!
Name: Liigendlaager, veovoll
Manufacturer: FAG

Ord. 1 b-day

1

28.73

Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00

Tellitav 1p

1

32.70

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Ord. 1 b-day

4

43.31

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00

Additional information OE codes Linked vehicles

62708
Joint Kit, drive shaft

JAPKO

Fitting Position: Wheel Side
Overall Length [mm]: 155
Length 1 [mm]: 86
Sealing Ring Diameter [mm]: 56
Internal Toothing wheel side: 30
External Toothing wheel side: 27
External Thread [mm]: 22 X 1,5
Specification: Groove Type: Middle
Manufacturer: JAPKO

Orderable

3

30.64

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

GI-708
Joint Kit, drive shaft

JAPANPARTS

Fitting Position: Wheel Side
Overall Length [mm]: 155
Length 1 [mm]: 86
Sealing Ring Diameter [mm]: 56
Internal Toothing wheel side: 30
External Toothing wheel side: 27
External Thread [mm]: 22 X 1,5
Specification: Groove Type: Middle
Name: LIIGENDLAAGER, VEOVOLL
Manufacturer: JPA

Ord. 2-3 b-days

1

30.65

Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00

Additional information OE codes Linked vehicles

62-07-708
Joint Kit, drive shaft

ASHIKA

Fitting Position: Wheel Side
Overall Length [mm]: 155
Length 1 [mm]: 86
Sealing Ring Diameter [mm]: 56
Internal Toothing wheel side: 30
External Toothing wheel side: 27
External Thread [mm]: 22 X 1,5
Specification: Groove Type: Middle
Manufacturer: ASHIKA

Ord. 1 b-day

1

31.58

Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00

Additional information OE codes Linked vehicles

34-14 498 0006
Joint Kit, drive shaft

MEYLE

Fitting Position: Front Axle, Wheel Side
Transmission Type: Manual Transmission
Engine Code: EJ18 SPI
External Toothing wheel side: 27
Internal Toothing wheel side: 22
Sealing Ring Diameter [mm]: 56
Joint Type: CV Joint
Drive Shaft: without ABS ring
Length [mm]: 153
Surface: Powder coated
Name: LIIGENDLAAGER, VEOVOLL
Manufacturer: MEY

Ord. 2-3 b-days

6

33.53

Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00

Additional information OE codes Linked vehicles

15-1084
Joint Kit, drive shaft

METELLI

Transmission Type: Manual Transmission
Fitting Position: Front Axle, Wheel Side
Construction Year to: 12.1991
Thread Size: M22x1.5
External Toothing wheel side: 27
Internal Toothing wheel side: 30
Sealing Ring Diameter [mm]: 56
Outer Diameter [mm]: 87.9
Bellows Material: Rubber
Manufacturer: METELLI PRZEGUBY POLOSIE

Tellitav 1p

12

36.25

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

NPW-SB-003
Joint Kit, drive shaft

NTY

Fitting Position: Front Axle, transmission sided
External Toothing wheel side: 25
External Toothing differential side: 25
Internal Toothing differential side, conn. to transmission: 22
Sealing Ring Diameter [mm]: 40
Outer Diameter [mm]: 75
Fabrication Number: NPW-SB-003
Manufacturer: NTY

Ord. 2-3 b-days

5

36.97

0 laoseisuga toote tarneaega kindlasti enne tellimist täpsustada 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

Orderable

2

46.54

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

CV-8008
Joint Kit, drive shaft

Kavo Parts

Fitting Position: Wheel Side, Front Axle
Length [mm]: 145
External Toothing wheel side: 27
Internal Toothing wheel side: 30
Sealing Ring Diameter [mm]: 56
Manufacturer: KAVO

Orderable

1

38.52

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

CV-8007
Joint Kit, drive shaft

Kavo Parts

Fitting Position: Wheel Side, Front Axle
Length [mm]: 145
External Toothing wheel side: 27
Internal Toothing wheel side: 22
Sealing Ring Diameter [mm]: 56
Manufacturer: KAVO

Orderable

2

41.35

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

0810-008
Joint Kit, drive shaft

FEBEST

Production date from: 198905
Fitting Position: Wheel Side, Front Axle
Length [mm]: 146
Weight [kg]: 2.091
External Toothing wheel side: 27
Internal Toothing wheel side: 30
Sealing Ring Diameter [mm]: 56
Outer Diameter [mm]: 82
Packaging length [cm]: 20
Packaging width [cm]: 10.5
Packaging height [cm]: 10.5
Manufacturer: FEBEST

Orderable

1

64.18

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

0811-1001
Joint Kit, drive shaft

FEBEST

Production date from: 198905
Production date to: 199311
Fitting Position: Front Axle, transmission sided
Weight [kg]: 1.912
External Toothing wheel side: 25
External Toothing differential side: 25
Internal Toothing differential side, conn. to transmission: 22
Sealing Ring Diameter [mm]: 40
Outer Diameter [mm]: 75
Packaging length [cm]: 20
Packaging width [cm]: 10.5
Packaging height [cm]: 10.5
Manufacturer: FEBEST

Orderable

2

67.03

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

0810-007
Joint Kit, drive shaft

FEBEST

Production date from: 198905
Fitting Position: Wheel Side, Front Axle
Weight [kg]: 2.417
External Toothing wheel side: 27
Internal Toothing wheel side: 22
Sealing Ring Diameter [mm]: 56
Outer Diameter [mm]: 83
Packaging length [cm]: 20
Packaging width [cm]: 10.5
Packaging height [cm]: 10.5
Manufacturer: FEBEST

Orderable

3

76.03

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

301991
Joint Kit, drive shaft

LÖBRO

Construction Year from: 05.1989
Construction Year to: 12.1993
Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
Joint Type: CV Joint
External Toothing wheel side: 27
Internal Toothing wheel side: 22
Sealing Ring Diameter [mm]: 56
Machined: with groove in internal component
Joint Diameter [mm]: 83
Length [mm]: 152
Thread Size: M22x1.5
Bellows Material: NBR (nitrile butadiene rubber)
New Part:
Supplementary Article/Supplementary Info: with grease
Manufacturer: GKN LOBRO

Tellitav

6

92.86

Kaup on euroopa kesklaos. Tellimuse saadame 17.00

Tellitav 1p

1

101.42

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Orderable

1

117.99

Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00

Additional information OE codes Linked vehicles

Navigation Languages

et
en

Catalogue

History

1. Üldtingimused.

Käesolevad müügitingimused on leping e-poe klientide (Ostja) ja S.V Ärigrupp OÜ (Müüja) vahel ostmise ja müümise reeglite kehtestamiseks ja osapoolte vaidluste lahendamiseks. Neis tingimustes sätestatakse Müüja ja Ostja õigused ja kohustused, vastutus, kaupade omandamise ja nende eest tasumise tingimused, tarne- ja reklamatsiooni kord. Müügitingimused ei saa olla vastuolus Eesti Vabariigis kehtivate õigusnormidega. Müüja jätab endale õiguse käesolevaid tingimusi ilma ette teatamata muuta või täiendada. Kõik muudatused ja täiendused jõustuvad veebilehel avaldamise hetkest. Müüja ei ole vastutav võimalike kahjude eest, mis tekkisid seetõttu, et Ostja ei ole käesolevaid Tingimusi lugenud.

2. Kliendi andmed.

Ostja poolt Müüjale edastatud isikuandmeid käideldakse vastavuses Andmekaitseseadusega. Ostja vastutab oma esitatavate andmete õigsuse eest. Ostja vastutab selle eest, et tema sisselogimisandmed ei satuks kolmandate isikute kätte. Müüja ei vastuta tagajärgede eest, mida on põhjustanud Ostja sisselogimisandmete sattumine kolmandate isikute kätte Ostja süü läbi.

3. Kaupade hind ja informatsiooni täpsus.

Toodete hinnad on esitatud eurodes ilma transpordikuluta. Hinnad sisaldavad käibemaksu. Müüja ei vastuta tooteinfo ebatäpsuse eest, see informatsioon pärineb tootjatelt. Hinna- ja tooteinfo võib muutuda, muudatused jõustuvad alates avaldamise hetkest. Juhul, kui tehnilise vea tõttu on mõne pakutava toote hind muutunud ebamõistlikult odavaks ja Müüja ei ole eraldi märkinud, et tegemist on tema poolt Kaubale kehtestatud allahindlusega, siis on Müüjal õigus taganeda ostu-müügitehingust. Lisaks Kauba hinnale kohustub Ostja tasuma ka Kaubaga kaasnevad transpordikulud. Transpordikulu suurus oleneb transpordi viisist, sihtkohast, saadetise kaalust ja mõõtudest.

4. Tellimuse esitamine.

Ostja saab tellimuse esitada LakiNet.ee veebilehe tellimussüsteemi kaudu või meiliga aadressil info@lakiauto.ee . Peale tellimuse sooritamist saadab Müüja Ostja e-posti aadressile tellimuse kinnituse. Kauba eest on võimalik tasuda üle Pangalingi või ülekandega. Ostja ja Müüja vaheline müügitehing loetakse sõlmituks hetkest, kui Ostja on nõustunud müügitingimustega ja tellimuse edukalt sooritanud. Tellimuse täitmist alustatakse peale tellimuse täissumma laekumist Müüja pangaarvele. Tellimus tühistatakse automaatselt, kui Ostja ei ole tellimuse summat õigeaegselt tasunud. Tellimuse tähtaega arvestatakse tööpäevades. Tarnetähtaeg kehtib juhul, kui tellimise hetkel on kaup varuosade tarnija laos. Müüjal on õigus keelduda tellimuse täitmisest kui tellimuse täitmine on võimatu temast sõltumatutel asjaoludel.

5. Kaupade kättetoimetamine.

Ostjal on võimalus kaup kätte saada Laki Auto Tallinna või Tartu esindustes. Soovi korral toimetatakse kaup Ostjale kulleriga, sellisel juhul lisandub kauba hinnale transpordikulu vastavalt hinnakirjale. Transpordiviisi valiku teeb Ostja tellimust vormistades. Tellitud kaup saadetakse tellimuses märgitud aadressile. Juhul, kui tarne Ostja märgitud aadressil ei ole võimalik, tagastatakse kaup Müüja lattu. Korduva tarne kulu kannab Ostja. Müüja ei vastuta kauba tarne hilinemise ja sellest põhjustatud kahjude eest.

6. Tellimuse tühistamine ja toote tagastamine.

Füüsilisest isikust Ostjal on õigus taganeda ostu-müügilepingust 14 kalendripäeva jooksul alates Kauba kättesaamisest. Lepingu katkestamiseks tuleb kaup tagastada. Tagastatav kaup ei tohi olla kasutatud ja peab olema originaalpakendis. Kaubal peavad alles olema kõik originaalkleebised ja sildid. Kui pakend puudub, on määrdunud või rikutud, on Müüjal õigus keelduda kauba tagasi ostmisest. Ostjapoolsel lepingust taganemisel kannab toote tagastamise kulud Ostja. Ostjal puudub õigus ostu-müügilepingust taganeda, kui ostu-müügilepingu objektiks on toode mis on valmistatud Ostja tellimuse alusel ja Müüjal puudub võimalus toote tagastamiseks tarnijale.

7. Garantii.

Kõigi kaupade puhul kehtib eraisikust ostjale 24 kuuline garantii. Juriidilisest isikust ostja puhul kehtib tootja poolt määratud garantiiaeg. Garantiiperioodi arvestatakse alates kauba üleandmisest ostjale. Toote ümbervahetamine või garantiiremont ei pikenda esialgset garantiiaega. Garantii aluseks on Müüja poolt väljastatud müügidokument. Garantii hõlmab ennekõike tootel ilmnenud tootmis- ja materjalivigu ning garantii alla ei kuulu vead mis põhjustatud normaalsest kulumisest, valest paigaldusest, valest kasutamisest, muudest välisteguritest põhjustatud vigadest. Garantii kehtib ainult tingimusel, et toode on paigaldatud ametlikus autotöökojas ja paigaldamisel on täidetud kõik tootjapoolsed nõuded.

8. Vaidluste lahendamine.

Ostja ja Müüja vahel tekkinud vaidlused lahendatakse läbirääkimiste teel. Kui kokkuleppele ei jõuta, on pooltel õigus pöörduda Tarbijakaitseametisse või Harju Maakohtusse. Erimeelsuste lahendamisel lähtutakse Eesti Vabariigis kehtivatest seadustest.

1.02.2018
S. V. Ärigrupp OÜ
Laki 7, Tallinn

1. General provisions

1.1. This privacy policy regulates the principles of collection, processing, and storage of personal data. Personal data is processed and stored by S. V. Ärigrupp OÜ, who is the controller of the personal data (hereinafter the controller).

1.2. For the purposes of this privacy policy, a data subject means the customer or another natural person whose personal data is processed by the controller.

1.3. For the purposes of this privacy policy, a customer means anyone who purchases goods or services on the controller’s website.

1.4. The controller observes the principles relating to personal data processing provided by legislation and, among other things, processes personal data in a lawful, fair, and secure manner. The controller is able to declare that personal data has been processed in accordance with the provisions of the legislation.

2. Collection, processing, and storage of personal data

2.1. The personal data collected, processed, and stored by the controller has been collected electronically, mainly via the website and e-mail.

2.2. By sharing their personal data, the data subject grants the controller the right to collect, arrange, use and administer, for the purpose defined in the privacy policy, the personal data that the data subject shares with the controller either directly or indirectly when purchasing goods or services on the website.

2.3. The data subject is liable for the accuracy, correctness, and integrity of the data submitted by them. The submission of knowingly false data is regarded as a breach of the privacy policy. The data subject is required to immediately notify the controller of any changes in the data submitted.

2.4. The controller is not liable for any damage or loss caused to the data subject or a third party as a result of the submission of false data by the data subject.

3. Processing of personal data of customers

3.1. The controller may process the following personal data of the data subject:

3.1.1. Given name and surname;

3.1.2. Telephone number;

3.1.3. E-mail address;

3.1.4. Delivery address;

3.2. In addition to the foregoing, the controller has the right to collect data about the customer that are available in public registers.

3.3. The legal basis for the processing of personal data points (a), (b), (c) and (f) of Article 6(1) of the General Data Protection Regulation:

(a) the data subject has given consent to the processing of his or her personal data for one or more specific purposes;

(b) processing is necessary for the performance of a contract to which the data subject is a party or in order to take steps at the request of the data subject prior to entering into a contract;

(c) processing is necessary for compliance with a legal obligation to which the controller is subject;

(f) processing is necessary for the purposes of the legitimate interests pursued by the controller or by a third party, except where such interests are overridden by the interests or fundamental rights and freedoms of the data subject which require protection of personal data, in particular where the data subject is a child.

3.4. Processing of personal data according to the purpose of processing:

3.4.1. Purpose of processing – security and safety
The maximum period of storage of personal data – according to the terms specified by law

3.4.2. Purpose of processing – the processing of orders
Maximum period of storage of personal data – 7 years.

3.4.3. Purpose of processing – ensuring the functioning of online store services
Maximum period of storage of personal data – 7 years.

3.4.4. Purpose of processing – customer management
Maximum period of storage of personal data – 7 years.

3.4.5. Purpose of processing – financial activities, accounting
Maximum period of storage of personal data – according to the terms specified by law

3.4.6. Purpose of processing – marketingMaximum period of storage of personal data – 7 years.

3.5. The controller has the right to share personal data of customers with third parties such as processors, accountants, transport and courier companies, companies providing transfer services. The controller is in charge of the processing of personal data.

3.6. The controller processes and stores personal data of the data subject implementing the organizational and technical measures to ensure that the personal data is protected against any accidental or unlawful destruction, alteration, disclosure, and any other unlawful processing.

3.7. The controller stores the data of the data subjects depending on the purpose of processing, but no longer than for 7 years.

4. Rights of the data subject

4.1. The data subject has the right to gain access to and examine their personal data.

4.2. The data subject has the right to obtain information on the processing of their personal data.

4.3. The data subject has the right to modify or rectify inaccurate data.

4.4. If the controller processes personal data of the data subject based on the consent granted by the latter, the data subject has the right to withdraw their consent at any time.

4.5. To exercise their rights, the data subject can contact the customer support of the online store at info@lakiauto.ee.

4.6. To protect their rights, the data subject can file a complaint with the Data Protection Inspectorate.

5. Final provisions

5.1. These data protection terms and conditions have been prepared in compliance with Regulation (EU) 2016/679 of the European Parliament and of the Council on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation), the Personal Data Protection Act of the Republic of Estonia and legislation of the Republic of Estonia and the European Union.

5.2. The controller has the right to amend the data protection terms and conditions in part or in full, notifying the data subjects of the amendments via https://lakinet.ee/.