• Vehicle Identification Number (VIN) from: S00200001
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 340
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 1821365G00
• Quality: OE
• Weight [g]: 82
• Gross Weight [g]: 112
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
BALENO (EG), 03.95-0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
BALENO (EG), 03.95-0
(kvaliteediklass: Q)"

• Engine Code: J18A
• Vehicle Identification Number (VIN) to: 00400000
• Number of pins: 2
• Manufacturer: KAVO PARTS

• Vehicle Identification Number (VIN) from: 400001
• for OE number: 89424-87703-000
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-MZ-000
• Manufacturer: NTY
• Name: NTY ECT-MZ-000

• Engine Code: J18A
• Vehicle Identification Number (VIN) from: 00400001
• Supplementary Article/Info 2: without connector parts
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• for OE number: BP4W18845
• Manufacturer: MEAT&DORIA

• Manufacturer: FAE
• Additional information: 33235 NRF
• Lisainfo: 33235 NRF

• Engine Code: J18A
• Vehicle Identification Number (VIN) from: 00400001
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: J18A
• Number of pins: 2
• Manufacturer: JPN

• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Country Specific Design: Great Britain, Germany, Hongkong
• Vehicle Identification Number (VIN) from: 200001
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-SK-004
• Cable Length [mm]: 545
• Manufacturer: NTY

• Engine Code: J18A
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Engine Code: J18A
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Vehicle Identification Number (VIN) from: 00200001
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: S00200000
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Construction Year from: 09.1998
• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 2
• Supplementary Article/Info 2: without cable
• Rotation Direction: Clockwise rotation
• for OE number: 22633AA111
• Name: Andur,drosselklapiasend
• Manufacturer: MD

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV120
• Manufacturer: ESEN SKV

• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Vehicle Identification Number (VIN) from: S00200001
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-0121
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: JSAEG**1S001*0001
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Cable Length [mm]: 450
• Weight [kg]: 0.001
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Country Specific Design: Great Britain, Germany, Hongkong
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 200001
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 350
• Name: DE ES20124-12B1
• Manufacturer: DELPHI

• Vehicle Identification Number (VIN) to: *********00160000
• Fitting Position: Front
• Block Separation:
• Vehicle Identification Number (VIN) from: *********00160001
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Weight [kg]: 0.1
• Observe service information:
• Name: LAMBDA ANDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.1999
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar Sensor, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: J18A
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: *00140001
• Vehicle Identification Number (VIN) to: *00200000
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: J18A
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Identification Number (VIN) from: 00200001
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: J18A
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 200000
• Vehicle Identification Number (VIN) from: 200001
• Cable Length [mm]: 324
• Manufacturer: DELPHI

• Vehicle Identification Number (VIN) to: S00200000
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 325
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 1821377E00
• Quality: OE
• Weight [g]: 89
• Gross Weight [g]: 119
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Vehicle Identification Number (VIN) from: S00200001
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: Exhaust Manifold, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Conductor Number: 4
• Cable Length [mm]: 450
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.