• Engine Code: G16B
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Pressure [bar]: 0.3
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Engine Code: G16B
• Pressure [bar]: 0
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Switch Pressure [bar]: 0.3
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Thread Size: 1/8x28 BSP
• Pressure [bar]: 0.35
• Manufacturer: FAE

• Pressure [bar]: 0.3
• Housing Colour: black
• Thread Size: 1/8
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Number of pins: 1
• Switch pressure from [bar]: 0.2
• Switch pressure to [bar]: 0.4
• Thread Size: 1/8" BSPT
• Colour: black
• Supplementary Article/Supplementary Info: without gaskets/seals
• Manufacturer: METZGER

• Engine Code: G16B
• Number of pins: 2
• Manufacturer: KAVO

• for OE number: 89424-87703-000
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-MZ-000
• Manufacturer: NTY
• Name: NTY ECT-MZ-000

• Mounting Type: Bolted
• Voltage [V]: 12
• Pressure [bar]: 0.4
• Combi Switch Function: Normally Closed Contact
• Thread Size: 1/8 GAS
• Colour: red
• Spanner Size: 24
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6ZF007392001

Manufacturer: BOSCH

• Engine Code: G16B
• Supplementary Article/Info 2: without connector parts
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 3
• Fitting Depth [mm]: 27
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fabrication Number: ECP-SU-000
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• for OE number: 89424-87703-000
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11461

• Manufacturer: FAE
• Additional information: 33235 NRF
• Lisainfo: 33235 NRF

• Engine Code: G16B
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 27
• Manufacturer: MEAT&DORIA

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 27
• Alternative Repair Kit: 550347
• Manufacturer: ERA

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Resistor Type: Hall Sensor
• Height [mm]: 26.7
• Manufacturer: VERNET

• Engine Code: G16B
• Lambda Sensor: Regulating Probe, Unheated
• Number of circuits: 1
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SU-004
• Manufacturer: NTY

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Fitting Depth [mm]: 26.7
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Lambda Sensor: Regulating Probe, Unheated
• Voltage [V]: 12
• Length [mm]: 380
• Number of circuits: 1
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV524
• Manufacturer: ESEN SKV

• Engine Code: G16BA
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAG

• Number of pins: 2
• Housing Colour: black
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: G16B
• Name: EP 1.953.585
• Manufacturer: EPS

• Number of pins: 3
• Fitting Depth [mm]: 27
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe, Finger probe
• Vehicle Identification Number (VIN) from: 00200001
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV120

• Vehicle Identification Number (VIN) from: S00200001
• Transmission Type: Manual Transmission
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

Manufacturer: BOSCH

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 01.2000
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: G16B
• Vehicle Identification Number (VIN) to: 00200000
• not for country specific design: Australia
• Fitting Position: before catalytic converter
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Identification Number (VIN) from: 00200001
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Vehicle Identification Number (VIN) from: S00200001
• Transmission Type: Manual Transmission
• for OE number: 1821365G30
• Quality: OE
• Manufacturer Restriction: DENSO
• Connector type: with rubber grommet
• Thread Size: M18x1.5
• Cable Length [mm]: 530
• Number of pins: 4
• Weight [g]: 97
• Gross Weight [g]: 130
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
BALENO HATCHBACK (EG
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
BALENO HATCHBACK (EG
(kvaliteediklass: Q)"

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 3
• Spanner Size: 22
• Thread Size: M14x1.5
• for OE number: 1365050G00
• Supplementary Article/Info 2: with seal ring