• Vehicle Identification Number (VIN) to: V00100000
• Exhaust System: for pre-catalytic converter
• for OE number: 1821350G00
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 380
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 123
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SWIFT II SEDAN (AH,
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SWIFT II SEDAN (AH,
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: V00100001
• Vehicle Identification Number (VIN) to: V00200000
• for OE number: 1821365D43
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 720
• Number of pins: 4
• Weight [g]: 101
• Gross Weight [g]: 134
• Manufacturer: DENSO
• Name: DN DOX-0350

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
JIMNY (FJ), 09.98-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
JIMNY (FJ), 09.98-
(kvaliteediklass: Q)"

• Length [mm]: 60
• Housing Colour: black
• Spanner Size: 19
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: G13BB
• Number of pins: 2
• Manufacturer: KAVO

• for OE number: 89424-87703-000
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-MZ-000

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 3
• Fitting Depth [mm]: 27
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fabrication Number: ECP-SU-000
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• for OE number: 89424-87703-000
• Manufacturer: MEAT&DORIA

• for OE number: 33220-80G00
• Fabrication Number: ECP-SU-002
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11461

Manufacturer: ASHIKA

Manufacturer: JAPKO

• Manufacturer: FAE
• Additional information: 33235 NRF
• Lisainfo: 33235 NRF

• Engine Code: G13BB
• Supplementary Article/Info 2: without fastening clamp
• Name: EP 1.994.010
• Manufacturer: EPS

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 27
• Manufacturer: MEAT&DORIA

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 27
• Alternative Repair Kit: 550347
• Manufacturer: ERA

• Number of connectors: 3
• Weight [kg]: 0.08
• for OE number: 33220-50G02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of connectors: 3
• Weight [kg]: 0.08
• for OE number: 33220-50G02
• Name: SW 84 10 8247
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor Type: Hall Sensor
• Height [mm]: 26.7
• Manufacturer: VERNET

• Number of connectors: 3
• Weight [kg]: 0.08
• for OE number: 33220-50G02
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 27
• Manufacturer: ERA

• Outer Diameter [mm]: 18.4
• Number of connectors: 3
• Weight [kg]: 0.02
• for OE number: 33220-63J10
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Colour: black
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 18
• Number of connectors: 3
• Weight [kg]: 0.02
• for OE number: 33220-63J10
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 12.2000
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO
• Name: VA 253815

• Construction Year to: 12.2000
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Manufacturer: VALEO
• Name: VA 366193

• Construction Year from: 06.2014
• Construction Year to: 10.2018
• Frequency Range [MHz]: 433
• Valve colour: black, silver
• Tightening Torque [Nm]: 6
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Housing Colour: black
• Manufacturer: SKF
• Name: SK VKRA110020

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: G13BB
• Vehicle Identification Number (VIN): JSA, VSE
• Block Separation:
• Vehicle Identification Number (VIN) from: 00129321
• Number of connectors: 3
• Weight [kg]: 0.1
• for OE number: 33220-80G00
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: G13BB
• Name: EP 1.953.585
• Manufacturer: EPS

• Engine Code: G13BB
• Vehicle Identification Number (VIN): JSA, VSE
• Block Separation:
• Vehicle Identification Number (VIN) from: 00129321
• Number of connectors: 3
• Weight [kg]: 0.1
• for OE number: 33220-80G00
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fitting Depth [mm]: 27
• Manufacturer: ERA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV913
• Manufacturer: ESEN SKV

• Engine Code: G13BB
• Vehicle Production Country: Japan
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Vehicle Identification Number (VIN) from: V00100001
• Vehicle Identification Number (VIN) to: V00200000
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) to: V00100000
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Fitting Position: Rear, before catalytic converter
• Length [mm]: 750
• Thread Size: M18x1.5mm
• Number of pins: 4
• Lambda Sensor: Unheated, Finger probe
• Manufacturer: KAVO

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Cable Length [mm]: 392
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle
• Overall Length [mm]: 2,485
• Length [mm]: 36
• Sensor Type: Passive sensor
• Socket colour: grey
• Cable Length [mm]: 2,425
• paired article number: 31247
• Weight [kg]: 0.36
• Manufacturer: A.B.S.

• Construction Year to: 10.2008
• Manufacturer: BOSCH

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year to: 01.2004
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 635
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV623

• Vehicle Identification Number (VIN) from: V00100001
• Vehicle Identification Number (VIN) to: V00200000
• Exhaust System: for pre-catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 165
• Socket colour: white
• Number of circuits: 4
• Connector Shape: angular
• Number of pins: 4
• Thread Size: M18 x 1,5
• Weight [kg]: 0.116
• for OE number: 18213-65D50
• Length [mm]: 270
• Number of connectors: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Manufacturer: VEMO GERMANY
• Additional information: V64-76-0001 VEMO
• Lisainfo: V64-76-0001 VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: JAPKO

• Construction Year to: 10.2008
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Engine Code: G13BB
• Fitting Position: before catalytic converter
• Length [mm]: 375
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

Manufacturer: JAPANPARTS

• Engine Code: G13BB
• Pressure from [kPA]: 10
• Pressure to [kPA]: 139
• Output Voltage, from [V]: 0.895
• Output Voltage, up to [V]: 4.638
• Supplementary Article/Info 2: without fastening clamp
• Name: EP 1.993.213
• Manufacturer: EPS

• Number of pins: 5
• Manufacturer: KAVO

• Vehicle Identification Number (VIN) from: V00100001
• Vehicle Identification Number (VIN) to: V00200000
• Exhaust System: for pre-catalytic converter
• for OE number: 1821365D30
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 310
• Number of pins: 4
• Weight [g]: 80
• Gross Weight [g]: 113
• Manufacturer: DENSO
• Name: DN DOX-0354
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
JIMNY (FJ), 09.98-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
JIMNY (FJ), 09.98-
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) to: V00100000
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Cable Length [mm]: 380
• Thread Size: M 18x1,5
• Manufacturer: METZGER

• Transmission Type: Manual Transmission, Automatic Transmission
• for OE number: 18213-65D31
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Cable Length [mm]: 310
• Thread Size: M 18x1,5
• Manufacturer: METZGER

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 3
• Spanner Size: 22
• Thread Size: M14x1.5
• for OE number: 1365050G00
• Supplementary Article/Info 2: with seal ring