• Engine Code: G13BB
• Required quantity: 4
• for OE number: 1WT318110
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• Manufacturer: DENSO
• Name: DN K20TT
• Lisainfo: K20TT DENSO
• Additional information: K20TT DENSO

• Engine Code: G13BB
• Spark Plug: 1 - Earthed Electrode, with resistor
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Thread Length [mm]: 19
• Spanner Size: 16
• Technical Information: Nichel-Chromium with internal in branch
• Manufacturer: MAGNETI MARELLI

• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Electrode Gap [mm]: 0.7
• Spark Plug: with gasket seat, 1 - Earthed Electrode
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.1998
• Construction Year to: 10.2008
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Weight [kg]: 0.06
• Spark Plug: 1 - Earthed Electrode
• Version: E7EC1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Tightening Torque [Nm]: 20
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Spanner Size: 16
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Assy./disassy. by qualified personnel required!:
• Name: HE 8EH188704071
• Manufacturer: HELLA

• Construction Year from: 10.1998
• Construction Year to: 10.2008
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Height [mm]: 51
• Weight [kg]: 0.062
• Spark Plug: 1 - Earthed Electrode
• Version: VR7EC1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: G13BB
• Required quantity: 4
• for OE number: 5099949
• Connector type: Removable SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 56
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 59
• Manufacturer: DENSO
• Name: DN W22EPRU

• Engine Code: G13BB
• Required quantity: 4
• for OE number: 5960.F0
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• Manufacturer: DENSO
• Name: DN K20PRU

• Construction Year from: 10.1998
• Construction Year to: 10.2008
• Required quantity: 4
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Construction Year from: 10.1998
• Construction Year to: 10.2008
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Required quantity: 4
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: G13BB
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: BKR6E
• Lisainfo: BKR6E

Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Required quantity: 4
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Nickel GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC9YC
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 1.5
• Name: CH OE005/T10
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Electrode Gap [mm]: 0.8
• Spark Plug: with gasket seat, 3 - Earthed Electrode
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: G13BB
• Required quantity: 4
• Connector type: Crimped SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• Manufacturer: DENSO
• Name: DN W22TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: G13BB
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Required quantity: 4
• Electrode Gap [mm]: 0.8
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: 14 FR-8 DU
• Self-service suited packaging see parts list:
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Name: SššTEKššNAL
• Manufacturer: BERU

• Required quantity: 4
• Alternatively:
• Electrode Gap [mm]: 0.9
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Quality/ Grade: Poly-V Tit
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Name: SššTEKššNAL
• Manufacturer: BERU

• Construction Year from: 10.1998
• Construction Year to: 10.2008
• Required quantity: 4
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 5
• Number of pins: 4
• Manufacturer: BOSCH

• Engine Code: G13BB
• Spark Plug: 1 - Earthed Electrode, with resistor
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Thread Length [mm]: 19
• Spanner Size: 16
• Technical Information: Platinum-tip
• Name: MM SPB7206-9
• Manufacturer: MAGNETI MARELLI

• Required quantity: 4
• Alternatively:
• Electrode Gap [mm]: 1
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Pt GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC11WYPB4
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.382
• Packaging width [cm]: 2
• Packaging height [cm]: 2.032
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CCH9003
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Construction Year from: 10.1998
• Construction Year to: 10.2008
• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Required quantity: 4
• Electrode Gap [mm]: 0.7
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 4
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: G13BB
• Required quantity: 4
• Fuel Type: CNG/LPG
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Platinum Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• Manufacturer: DENSO
• Name: DN IK20TT
• Lisainfo: IK20TT DENSO
• Additional information: IK20TT DENSO

• Engine Code: G13BB
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Engine Code: G13BB
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Spark Plug: Iridium Middle Electrode, Fixed SAE connector
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Name: SššTEKššNAL
• Manufacturer: NGK
• Lisainfo: LPG1
• Additional information: LPG1