• Colour: black
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

Manufacturer: JPN

• Fabrication Number: ECT-ME-003
• Manufacturer: NTY
• Name: NTY ECT-ME-003

• Engine Code: K9K 266
• Manufacturer: KAVO PARTS

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 4
• Plug Type: Female
• Sensor Type: NTC Sensor
• Manufacturer: NISSENS
• Name: NI 207000

• Engine Code: K9K 266
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Engine Code: K9K 266
• Corresponds to the original part in colour: brown, green
• Manufacturer: FACET

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 226309418R
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Manufacturer: FAST

• Number of pins: 4
• Housing Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: 20 mm
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Number of pins: 4
• Connector Shape: angular
• Socket colour: black
• Fitted Diameter [mm]: 20
• for OE number: 2263000QAF
• Manufacturer: MEAT & DORIA

• Sensor Type: Active sensor
• for OE number: 22630-00QAG
• Manufacturer: KAMOKA

• Connector Shape: rectangular
• Fabrication Number: ECP-NS-013
• Manufacturer: NTY

• Number of pins: 2
• Socket colour: green
• Thread Size: M12x1,25 mm
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 16970BN700
• Manufacturer: MEAT & DORIA

• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 1
• Pressure from [kPA]: 20
• Pressure to [kPA]: 250
• Fabrication Number: ECM-RE-001

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.02
• for OE number: 22 63 094 18R
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: FAST
• Additional information: FASFT75105
• Lisainfo: FASFT75105

• Housing Colour: black
• Number of pins: 2
• Spanner Size: 0
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Weight [kg]: 0.021
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV355
• Manufacturer: ESEN SKV

• Engine Code: K9K 266
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX
• Lisainfo: 24-0150
• Additional information: 24-0150

• Thread Size: M12x125
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: green
• Manufacturer: FAE

• Colour: green
• Thread Size: M12x125
• Number of pins: 2
• Manufacturer: JPN

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAKA ROZRZ. DACIA LOGAN 1,5DCI 07-

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Housing Diameter [mm]: 20
• Number of pins: 4
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: K9K 266
• Name: EP 1.830.251
• Manufacturer: EPS

for article number: 1.880.177, 1.880.492, 1.880.504, 1.880.505, 1.880.506, 1.880.509, 1.880.604, 1.880.666, 1.880.700, 1.880.702, 1.880.703S, 1.880.704, 1.880.705, 1.880.707, 1.880.710S, 1.880.714, 1.880.715

• Engine Code: K9K 266
• Manufacturer: FACET

for article number: 7.8177, 7.8492, 7.8504, 7.8505, 7.8506, 7.8509, 7.8604, 7.8666, 7.8700, 7.8702, 7.8703S, 7.8704, 7.8705, 7.8707, 7.8710S, 7.8714, 7.8715

• Number of pins: 3
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• for OE number: 8200285798
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Engine Code: K9K 266
• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with retaining spring
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: JPN

• Number of pins: 2
• Manufacturer: JPN

• Number of pins: 3
• Quality: OE EQUIVALENT
• for OE number: 55209194
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• for OE number: 223650001R
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Connector Shape: rectangular
• Thread Size: M12x1,25
• Spanner Size: 24
• for OE number: 2206000Q0A
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Number of pins: 4
• Diameter [mm]: 20
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: K9K 266
• Manufacturer: FACET
• Name: EP 1.953.348

• Engine Code: K9K 266
• Thread Size: M12x1,25
• Spanner Size: 24
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Engine Code: K9K 266
• Manufacturer: FACET

• Engine Code: K9K 266
• Thread Size: M12x1,25
• Spanner Size: 24
• Manufacturer: FACET

• Construction Year from: 10.2005
• Construction Year to: 12.2010
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Alternatively:
• Number of pins: 3
• Weight [kg]: 0.02
• Alternative Repair Kit: 550173
• Manufacturer: ERA

• Number of pins: 3
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• for OE number: 223650001R
• Manufacturer: MEAT&DORIA

• Engine Code: K9K 266
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: EPS

• Engine Code: K9K 266
• Pressure from [kPA]: 11
• Pressure to [kPA]: 306
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 1
• Pressure from [kPA]: 20
• Pressure to [kPA]: 250
• Quality: OE EQUIVALENT
• for OE number: 223657266R
• Manufacturer: MEAT & DORIA

• Construction Year from: 10.2005
• Construction Year to: 12.2010
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Alternatively:
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550756
• Manufacturer: ERA

• Construction Year from: 06.2014
• Construction Year to: 10.2018
• Frequency Range [MHz]: 433
• Valve colour: black, silver
• Tightening Torque [Nm]: 6
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Housing Colour: black
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: SKF

• Construction Year from: 06.2014
• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: grey
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year from: 06.2014
• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.052
• Manufacturer: ERA

• Construction Year from: 06.2014
• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Construction Year from: 11.2014
• Version: TG1C
• Article number of recommended accessories: S180084510A, A2C59517072
• Permissible maximum speed [km/h]: 250
• Rims: for steel rims, for light alloy rims
• Valve stem material: Aluminium
• Colour: silver
• Frequency Range [MHz]: 433
• Follow installation instructions:
• General Information: Check compatibility of rim with sensor.
• Manufacturer: VDO

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: VDO

• Construction Year from: 06.2014
• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: Titanium
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Number of pins: 2
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Construction Year to: 06.2012
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Fabrication Number: EFP-CT-003
• Manufacturer: NTY
• Name: NTY EFP-CT-003

• Engine Code: K9K 266
• Pressure from [kPA]: 13
• Pressure to [kPA]: 256
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Construction Year from: 11.2014
• Version: TG1C
• Article number of recommended accessories: S180084510A, A2C59517072
• Permissible maximum speed [km/h]: 250
• Rims: for steel rims, for light alloy rims
• Valve stem material: Aluminium
• Colour: silver
• Frequency Range [MHz]: 433
• Follow installation instructions:
• General Information: Check compatibility of rim with sensor.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: VDO

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Heated, Regulating Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 250
• Weight [kg]: 0.079
• Name: SW 33 10 6770
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.2014
• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF

• Construction Year from: 06.2014
• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: silver
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Number of pins: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 10.2005
• Construction Year to: 12.2010
• Engine Code: K9K.2.66
• Height [mm]: 28
• Number of connectors: 3
• Required quantity: 1
• Supplementary Article/Info 2: for camshaft, without cable, with seal ring
• Colour: black
• Operating Mode: Electric
• Sensor Type: Active sensor, Hall Sensor
• Number of pins: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 28
• Connector Shape: oval
• Number of mounting bores: 1
• Weight [kg]: 0.034
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 06.2014
• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Engine Code: K9K 266
• Pressure from [kPA]: 13
• Pressure to [kPA]: 256
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: EPS

• Construction Year to: 06.2012
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fitting Position: Fuel Rail
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: METZGER

• Number of pins: 6
• Connector Shape: rectangular
• Housing Type: with housing
• Housing material: Plastic
• for OE number: 8200280060
• Manufacturer: DELLO AUTOMEGA

• Engine Code: K9K 266
• Length [mm]: 110
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: OHUHULGAMOOTJA
• Manufacturer: EPS

• Number of pins: 3
• Version: OE
• Manufacturer: METZGER

• Engine Code: K9K 266
• Length [mm]: 110
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Manufacturer: FACET

• Alternatively:
• Number of pins: 6
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Number of mounting bores: 2
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Engine Code: K9K 266
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.25
• for OE number: 9467599980