Manufacturer: MAGNETI MARELLI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• for OE number: 33220-63J10
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Manufacturer: ASHIKA

• Number of pins: 3
• Fitting Depth [mm]: 27
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fabrication Number: ECP-SU-000
• Manufacturer: NTY

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: JPA

Manufacturer: JPN

• Fabrication Number: ESS-SU-000
• Manufacturer: NTY
• Name: NTY ESS-SU-000

• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV850
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) to: TSMMHY81S00118757
• Number of pins: 3
• Name: DE SS11461
• Manufacturer: DELPHI

• for OE number: 13650-54G00
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Weight [g]: 30
• Guarantee: 3 years guarantee
• Number of pins: 2
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: M15A
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: M15A
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Construction Year from: 06.2005
• Construction Year to: 01.2009
• Number of pins: 3
• Manufacturer: JPN

• Construction Year from: 06.2005
• Construction Year to: 01.2009
• Vehicle Identification Number (VIN) to: ...00118758
• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 27
• for OE number: 3322050G02
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) to: TSMMHY81S00118757
• Resistor Type: Hall Sensor
• Height [mm]: 26.7
• Manufacturer: VERNET

• Construction Year to: 12.2012
• Vehicle Identification Number (VIN) to: TSMMHY81S00118757
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168601

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 27
• Alternative Repair Kit: 550347
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: 00118758
• Number of connectors: 3
• Weight [kg]: 0.08
• for OE number: 33220-50G02
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M15A
• Number of pins: 3
• Manufacturer: KAVO

• Vehicle Identification Number (VIN) to: 00118758
• Number of connectors: 3
• Weight [kg]: 0.08
• for OE number: 33220-50G02
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 00118758
• Number of connectors: 3
• Weight [kg]: 0.08
• for OE number: 33220-50G02
• Name: SW 84 10 8247
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: TSMMHY81S00118757
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Construction Year from: 01.2005
• Outer Diameter [mm]: 18
• Number of connectors: 3
• Weight [kg]: 0.02
• for OE number: 33220-63J10
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: oval
• Fabrication Number: ECM-SU-001
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Manufacturer: JPN

• Required quantity: 1
• Manufacturer: BREMI

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Construction Year from: 06.2005
• Construction Year to: 01.2009
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Number of circuits: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: TSMMHY81S00118757
• Number of pins: 3
• Fitting Depth [mm]: 26.7
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-FT-002
• Manufacturer: NTY

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAG

• Construction Year to: 06.2008
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Construction Year to: 12.2007
• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 900
• Manufacturer: NTY

• Cable Length [mm]: 495
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Fabrication Number: ESL-SB-010
• Manufacturer: NTY

Lisainfo: SUBARU JUSTY 1.3 03-,SUZUKI IGNIS 1.3,1.5 03-/REGULACYJNA, Dœ.CAœK. 500MM Additional information: SUBARU JUSTY 1.3 03-,SUZUKI IGNIS 1.3,1.5 03-/REGULACYJNA, Dœ.CAœK. 500MM

• Number of pins: 3
• Manufacturer: JPN

• Vehicle Identification Number (VIN) from: ...00118759
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• for OE number: 3322063J10000
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Engine Code: M15A
• Vehicle Identification Number (VIN) from: TSMMHY81S00118758
• Name: EP 1.953.585
• Manufacturer: EPS

• Engine Code: M15A
• Vehicle Identification Number (VIN) from: TSMMHY81S00118758
• Manufacturer: FACET

• Construction Year to: 12.2007
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Construction Year to: 12.2007
• Oxygen Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV120

• Required quantity: 1
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 27
• Housing Colour: black
• Connector Shape: oval
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Pressure from [kPA]: 13
• Name: DE PS20085-12B1
• Manufacturer: DELPHI

• Fabrication Number: EPP-SU-005
• Manufacturer: NTY
• Name: NTY EPP-SU-005

• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor

• Construction Year to: 12.2012
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of circuits: 4
• Length [mm]: 500
• Conductor Number: 4
• Resistor [Ohm]: 6
• Cable Length [mm]: 500
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Length [mm]: 635
• Conductor Number: 4
• Number of circuits: 4
• Resistor [Ohm]: 13
• Cable Length [mm]: 635
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: DN DOX-0113
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: S00118758
• Number of pins: 3
• Manufacturer: METZGER

• Construction Year to: 12.2007
• Vehicle Identification Number (VIN) to: 00118757
• Manufacturer: BOSCH

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 570
• for OE number: 71747242
• Manufacturer: MEAT&DORIA

• Construction Year to: 12.2007
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 3
• Colour: black
• Supplementary Article/Info 2: with seal ring
• Connector Shape: oval
• Number of mounting bores: 2
• Weight [kg]: 0.036
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 151
• Number of pins: 1
• Name: Detonatsiooniandur
• Manufacturer: DLP

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• for OE number: 71742176
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Pressure [Pa] from: 38,000
• Pressure [Pa] to: 455,000
• Manufacturer: METZGER

• Engine Code: M15A
• Fitting Position: after catalytic converter
• Cable Length [mm]: 650
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.563
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Fitting Position: Front, before catalytic converter
• for OE number: 1821386G00
• Length [mm]: 490
• Thread Size: M18x1.5mm
• Number of pins: 4
• Oxygen Sensor: Heated, Planar probe
• Manufacturer: KAVO PARTS

• Engine Code: M15A
• Fitting Position: after catalytic converter
• Cable Length [mm]: 650
• Conductor Number: 4
• Available as universal article as well, see article no.: 10.8235
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: M15A
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• Output Voltage, from [V]: 0.39
• Output Voltage, up to [V]: 4.74
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Construction Year to: 12.2007
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.133
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 495
• Manufacturer: DELPHI
• Name: DE ES20525-12B1

• Housing Type: without housing
• Manufacturer: KAVO

• for OE number: 18213-86G10, 1821360J00
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 630
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 132
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
SWIFT II SEDAN (AH,
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SWIFT II SEDAN (AH,
(kvaliteediklass: Q)"

• for OE number: 18213-86G00, 1821370H02
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 485
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 126
• Manufacturer: DENSO
• Name: DN DOX-0351

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
LIANA (ER), 10.01-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
LIANA (ER), 10.01-
(kvaliteediklass: Q)"

• Construction Year to: 12.2007
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Number of circuits: 4
• Connector Shape: angular
• Socket colour: black
• Weight [kg]: 0.125
• for OE number: 18213-57KA0-000
• Number of pins: 4
• Length [mm]: 400
• Cable Length [mm]: 350
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: TSMMHY81S00118758
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring

• Vehicle Identification Number (VIN) to: TSMMHY81S00118757
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring