Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Filter type: In-
Line Filter - Length [mm]: 60
- Outer Diameter [mm]: 58
-
Diameter 1/ Diameter 2 [mm]: IN/
OUT : 7 - Manufacturer: JAPKO
-
Filter type: In-
Line Filter - Width [mm]: 80
- Height [mm]: 58
- Outer Diameter [mm]: 49
- Inlet Ø [mm]: 7
- Outlet Ø [mm]: 7
- Outer Diameter 1 [mm]: 56
- SVHC: No SVHC present!
- Name: KTUSEFILTER
- Manufacturer: MAN
- Construction Year from: 01.1987
- Driven Units: Camshaft
- Number of Teeth: 94
- Packaging length [cm]: 25.5
- Packaging width [cm]: 16
- Packaging height [cm]: 3
- Weight [kg]: 0.123
- Width [mm]: 19
- Tooth Pitch [mm]: 9.525
- Name: HAMMASRIHM
- Manufacturer: CON
- Construction Year to: 08.1987
- Driven Units: Camshaft
-
Article number of the recommended special tool: STT-
1 - Tensile Cord Material: Fiberglass
-
Belt Material: Polychloroprene
(Neoprene) - Colour: black
- Number of Teeth: 88
- Width [mm]: 19
- Tooth Pitch [mm]: 9.525
- Length [mm]: 838
- Manufacturer: GATES PASKI PRZEWODY
- Driven Units: Camshaft
- Trim Level: CR
- Number of Teeth: 88
- Width [mm]: 19
- Name: HAMMASRIHM
- Manufacturer: DAY
- Construction Year to: 04.1987
- Number of Teeth: 88
- Length [mm]: 838
- Width [mm]: 19
- Tooth Pitch [mm]: 9.525
- Manufacturer: BOSCH PASKI NAPÊDOWE
- Construction Year to: 01.1987
- Driven Units: Camshaft
- Number of Teeth: 88
- Packaging length [cm]: 25.5
- Packaging width [cm]: 16
- Packaging height [cm]: 3
- Weight [kg]: 0.119
- Width [mm]: 19
- Tooth Pitch [mm]: 9.525
- Name: HAMMASRIHM
- Manufacturer: CON
- Driven Units: Camshaft
- Number of Teeth: 88
- Width [mm]: 19
- Belts: with trapezoidal tooth profile
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Width [mm]: 36
- Inner brake drum diameter [mm]: 200
- Name: PIDURIKLOTSIDE KOMPLEKT
- Manufacturer: MAX
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 119.7
- Height [mm]: 47.5
- Thickness [mm]: 14.8
- WVA Number: 20870
- Test Mark: ECE R90 APPROVED
- Manufacturer: JAPKO
- Length [mm]: 120
- Width [mm]: 47
- Test Mark: ECE R90 Approved
- Fitting Position: Front Axle
- Thickness 1 [mm]: 15
- Wear Warning Contact: excl. wear warning contact
- Weight [kg]: 1.07
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Width [mm]: 37
- Brake System: Sumitomo
- Manufacturer: JAPKO
- Length [mm]: 119.7
- Width [mm]: 47
- Test Mark: ECE R90 Approved
- Fitting Position: Front Axle
- Thickness 1 [mm]: 15
- Wear Warning Contact: excl. wear warning contact
- Weight [kg]: 1.07
- Manufacturer: FEBI HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
-
FMSI Code: D302-
7153 D242 D539- -
Test Mark: E1 90R-
01881/ 985 - WVA Number: 20870
- Brake System: Akebono
-
Supplementary Article/Info 2: without anti-
squeak plate - Supplementary Article/Supplementary Info: with accessories
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: with acoustic wear warning
- Width 1 [mm]: 120.1
- Width 2 [mm]: 120
- Height 1 [mm]: 47
- Height 2 [mm]: 47
- Thickness 1 [mm]: 14.3
- Thickness 2 [mm]: 14.3
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Fitting Position: Front Axle
- Width [mm]: 119.6
- Height [mm]: 47.4
- Thickness [mm]: 15
- Number of wear indicators [per axle]: 4
- Wear Warning Contact: with acoustic wear warning
- Brake System: Akebono
-
Supplementary Article/Info 2: with anti-
squeak plate -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MEY
- Fitting Position: Rear Axle
- Width [mm]: 37
- Brake System: Sumitomo
- Inner brake drum diameter [mm]: 200
- Manufacturer: BREMBO
- Fitting Position: Rear Axle
-
FMSI Code: D325-
7223 -
Test Mark: E1 90R-
01878/ 991 - WVA Number: 20076 20077
- Brake System: Akebono
-
Supplementary Article/Info 2: without anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: with acoustic wear warning
- Width 1 [mm]: 107.8
- Width 2 [mm]: 107.6
- Height 1 [mm]: 42.5
- Height 2 [mm]: 42.5
- Thickness 1 [mm]: 14.8
- Thickness 2 [mm]: 14.8
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP611
- Additional information: LP611 DELPHI
- Lisainfo: LP611 DELPHI
- Fitting Position: Front Axle
- Width [mm]: 119.7
- Height [mm]: 47.3
- Thickness [mm]: 15
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 20870
- Brake System: Akebono
- Packaging length [cm]: 15.2
- Packaging width [cm]: 8.8
- Packaging height [cm]: 8.4
- Weight [kg]: 1
- Manufacturer: MINTEX
- Width [mm]: 30
- Outer Diameter [mm]: 200
- Fitting Position: Rear Axle
- Weight [kg]: 1.02
- Name: PIDURIKLOTSIDE KOMPLEKT
- Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Height 1 [mm]: 56.5
- Thickness 1 [mm]: 15.5
- Wear Warning Contact: with acoustic wear warning
- Brake System: AKEBONO
- Width 1 [mm]: 141
- Width [mm]: 141
- Thickness [mm]: 16
- Height [mm]: 55.5
- Manufacturer: ACKOJA
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Brake System: AKEBONO
- Width [mm]: 120
- Height [mm]: 47.3
- Thickness [mm]: 15
- WVA Number: 20870
- Wear Warning Contact: excl. wear warning contact
-
Supplementary Article/Info 2: without anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 1.03
- Name: VA 301266
- Manufacturer: VALEO
- Length [mm]: 108
- Width [mm]: 43
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 16
- Wear Warning Contact: with acoustic wear warning
- Weight [kg]: 0.86
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 04.1987
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Width [mm]: 37
- Supplementary Article/Supplementary Info: without lever
- Lisainfo: Brake Shoe Set
- Additional information: Brake Shoe Set
- Length [mm]: 107.5
- Width [mm]: 42.6
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 15.5
- Wear Warning Contact: with acoustic wear warning
- Weight [kg]: 0.86
- Name: SW 81 91 6580
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 23
- Outer Diameter [mm]: 52
- Weight [kg]: 0.266
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Width [mm]: 119
- Thickness [mm]: 15
- Height [mm]: 47
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Akebono
- WVA Number: 20870
- Manufacturer: BREMBO
- Name: BR P 83 011
- Construction Year to: 04.1987
- Fitting Position: Front Axle
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 20870
- Thickness [mm]: 15
- Width [mm]: 120
- Height [mm]: 47.3
- Manufacturer Restriction: AKEBONO System
- Manufacturer: BOSCH
- Construction Year to: 04.1987
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Width [mm]: 37
-
Test Mark: E1 90R-
011043/ 187 - MAPP code available:
-
Article number of recommended accessories: 03.0137-
9114.2 - Observe dimensions:
- Name: Piduriklotside komplekt
- Manufacturer: ATE
- for model code: AE82
- Diameter [mm]: 52
- Width [mm]: 23
- Tensioner Pulley Actuation: Manual
- Name: SK VKM71202
- Manufacturer: SKF
- Fitting Position: Front Axle
- Manufacturer Restriction: AKEBONO
- Width [mm]: 119.7
- Height [mm]: 47.5
- Thickness [mm]: 15
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article/Supplementary Info: with accessories
-
Test Mark: E9 90R 01107/
057 -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Construction Year to: 04.1987
- Fitting Position: Front Axle
- Width [mm]: 119.8
- Height [mm]: 47.6
- Thickness [mm]: 15
- Brake System: Akebono
-
Test Mark: E9 90R-
01247/ 057 - MAPP code available:
-
Article number of recommended accessories: 13.0460-
0325.2 - Observe dimensions:
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: ATE
Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact
- Fitting Position: Front Axle
- Width [mm]: 119.7
- Height [mm]: 47.3
- Thickness [mm]: 15
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 20870
- Brake System: Akebono
- Packaging length [cm]: 12.5
- Packaging width [cm]: 8.1
- Packaging height [cm]: 8
- Weight [kg]: 1
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TEX
- Driven Units: Camshaft
- Number of belts: 1
- Number of tension rollers: 1
- Manufacturer: KAVO
- Fitting Position: Front Axle
- Width [mm]: 119.7
- Height [mm]: 47.3
- Thickness [mm]: 15
- Wear Warning Contact: prepared for wear indicator
- WVA Number: 20870
- Brake System: Akebono
- Weight [kg]: 1
- Name: HE 8DB355006091
- Manufacturer: HELLA PAGID
- Fitting Position: Rear Axle
- Thickness [mm]: 15
- Test Mark: R90 Homologated
- Width [mm]: 108
- Height [mm]: 43
- Weight [kg]: 0.8
- Number of wear indicators [per axle]: 4
- Height 1 [mm]: 43
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Akebono
- Packing Type: Box
- WVA Number: 21833
- Packaging length [cm]: 15
- Packaging width [cm]: 10.5
- Packaging height [cm]: 4.3
- Manufacturer: JURID
- Number of Teeth 1: 88
- Width 1 [mm]: 19
- Manufacturer: JAPKO