• Filter type: In-Line Filter
• Length [mm]: 60
• Outer Diameter [mm]: 58
• Diameter 1/ Diameter 2 [mm]: IN/OUT : 7
• Manufacturer: JAPKO

• Filter type: In-Line Filter
• Width [mm]: 80
• Height [mm]: 58
• Outer Diameter [mm]: 49
• Inlet Ø [mm]: 7
• Outlet Ø [mm]: 7
• Outer Diameter 1 [mm]: 56
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Construction Year from: 08.1985
• Construction Year to: 09.1987
• Driven Units: Camshaft
• Article number of the recommended special tool: STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 88
• Width [mm]: 19
• Tooth Pitch [mm]: 9.525
• Length [mm]: 838
• Manufacturer: GATES

• Driven Units: Camshaft
• Trim Level: CR
• Number of Teeth: 88
• Width [mm]: 19
• Name: HAMMASRIHM
• Manufacturer: DAY

• Driven Units: Camshaft
• Number of Teeth: 88
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.119
• Width [mm]: 19
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Fitting Position: Rear Axle
• Brake System: SUMITOMO
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Width [mm]: 36
• Inner brake drum diameter [mm]: 200
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 119.7
• Height [mm]: 47.5
• Thickness [mm]: 14.8
• WVA Number: 20870
• Test Mark: ECE R90 APPROVED
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 119.7
• Height [mm]: 47.5
• Thickness [mm]: 14.8
• WVA Number: 20870
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPKO

• Construction Year to: 04.1987
• Fitting Position: Front Axle
• Width [mm]: 119.7
• Height [mm]: 47.5
• Brake System: AKEBONO
• Thickness [mm]: 15
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 37
• Brake System: Sumitomo
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 37
• Brake System: Sumitomo
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• FMSI Code: D302-7153 D242 D539-
• Test Mark: E1 90R-01881/985
• WVA Number: 20870
• Brake System: Akebono
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 120.1
• Width 2 [mm]: 120
• Height 1 [mm]: 47
• Height 2 [mm]: 47
• Thickness 1 [mm]: 14.3
• Thickness 2 [mm]: 14.3
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Rear Axle
• Width [mm]: 37
• Brake System: Sumitomo
• Inner brake drum diameter [mm]: 200
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• FMSI Code: D325-7223
• Test Mark: E1 90R-01878/991
• WVA Number: 20076 20077
• Brake System: Akebono
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 107.8
• Width 2 [mm]: 107.6
• Height 1 [mm]: 42.5
• Height 2 [mm]: 42.5
• Thickness 1 [mm]: 14.8
• Thickness 2 [mm]: 14.8
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP611
• Additional information: LP611 DELPHI
• Lisainfo: LP611 DELPHI

• Fitting Position: Front Axle
• Brake System: AKEBONO
• Width [mm]: 120
• Height [mm]: 47.3
• Thickness [mm]: 15
• WVA Number: 20870
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.03
• Manufacturer: VALEO
• Name: VA 301266

• Fitting Position: Front Axle
• Width [mm]: 119.7
• Height [mm]: 47.3
• Thickness [mm]: 15
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 20870
• Brake System: Akebono
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Height 1 [mm]: 56.5
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: with acoustic wear warning
• Brake System: AKEBONO
• Width 1 [mm]: 141
• Width [mm]: 141
• Thickness [mm]: 16
• Height [mm]: 55.5
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Width 1 [mm]: 30
• Outer Diameter 1 [mm]: 52
• Manufacturer: SNR /NTN-SNR/

• Construction Year to: 04.1987
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Supplementary Article/Supplementary Info: without lever
• Lisainfo: Brake Shoe Set
• Additional information: Brake Shoe Set

• Fitting Position: Front Axle
• Manufacturer Restriction: AKEBONO
• Width [mm]: 119.7
• Height [mm]: 47.5
• Thickness [mm]: 15
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E9 90R 01107/057
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Width [mm]: 119
• Thickness [mm]: 15
• Height [mm]: 47
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Akebono
• WVA Number: 20870
• Manufacturer: BREMBO
• Name: BR P 83 011

• Construction Year to: 04.1987
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 37
• Test Mark: E1 90R-011043/187
• MAPP code available:
• Article number of recommended accessories: 03.0137-9114.2
• Observe dimensions:
• Name: Piduriklotside komplekt
• Manufacturer: ATE

• for model code: AE8#
• Diameter [mm]: 52
• Width [mm]: 23
• Tensioner Pulley Actuation: Manual
• Manufacturer: SKF
• Name: SK VKM71202

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Manufacturer Restriction: AKEBONO
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 20870
• Test Mark: E1 90R-01811/149
• Length [mm]: 119.7
• Thickness [mm]: 15
• Height [mm]: 47.3
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Construction Year to: 04.1987
• Fitting Position: Front Axle
• Width [mm]: 119.8
• Height [mm]: 47.6
• Thickness [mm]: 15
• Brake System: Akebono
• Test Mark: E9 90R-01247/057
• MAPP code available:
• Article number of recommended accessories: 13.0460-0325.2
• Observe dimensions:
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Width [mm]: 119.7
• Height [mm]: 47.3
• Thickness [mm]: 15
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 20870
• Brake System: Akebono
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 1
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Driven Units: Camshaft
• Number of belts: 1
• Number of tension rollers: 1
• Manufacturer: KAVO

• Fitting Position: Front Axle
• Width [mm]: 119.7
• Height [mm]: 47.3
• Thickness [mm]: 15
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 20870
• Brake System: Akebono
• Weight [kg]: 1
• Name: HE 8DB355006091
• Manufacturer: HELLA PAGID

• Number of Teeth 1: 88
• Width 1 [mm]: 19
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Thickness [mm]: 15
• Test Mark: R90 Homologated
• Width [mm]: 108
• Height [mm]: 43
• Weight [kg]: 0.8
• Number of wear indicators [per axle]: 4
• Height 1 [mm]: 43
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Akebono
• Packing Type: Box
• WVA Number: 21833
• Packaging length [cm]: 15
• Packaging width [cm]: 10.5
• Packaging height [cm]: 4.3
• Manufacturer: JURID

• Number of Teeth 1: 88
• Width 1 [mm]: 19
• Manufacturer: JAPKO