• Filter type: Spin-on Filter
• Height [mm]: 140
• Outer Diameter [mm]: 91
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 71
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: Spin-on Filter
• Height [mm]: 142
• Outer Diameter [mm]: 93
• Thread Size: 3/4-16UNF
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Outer Diameter 1 [mm]: 56
• Thread Size 1: 3/4"-16 UNF
• Height [mm]: 141
• Filter type: In-Line Filter
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Spin-on Filter
• Outer Diameter 1 [mm]: 93
• Thread Size Exit: 3/4" 16 UNF
• Height [mm]: 132
• Diameter [mm]: 88
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Supplementary Article/Supplementary Info: with gaskets/seals
• Height [mm]: 123
• Outer Diameter [mm]: 65
• Outer Diameter 2 [mm]: 63
• Inner Diameter 2 [mm]: 56
• Thread Size Entry: M 36 X 1.5
• Thread Size Exit: 3/4-16 UNF
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Fuel Type: Diesel
• Height [mm]: 137
• Outer Diameter [mm]: 94
• for OE number: 186100-5420
• Manufacturer: KAMOKA FILTRY PALIWA

• Construction Year to: 04.2004
• Filter type: Spin-on Filter
• Height [mm]: 130
• Outer Diameter [mm]: 94
• Internal Thread Size: 3/4" - 16 UNF
• Seal Diameter [mm]: 4
• Weight [kg]: 0.46
• Supplementary Article/Info 2: with seal ring
• Name: KšTUSEFILTER
• Manufacturer: BLP
• Additional information: ADM52342
• Lisainfo: ADM52342

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 141
• Outer Diameter [mm]: 90
• Outer Diameter 1 [mm]: 94
• Outer Diameter 2 [mm]: 63
• Inner Diameter [mm]: 56
• Thread Size 1: 3/4-16 UNF
• Thread Size 2: M 36 X 1,5
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Filter type: Spin-on Filter
• Diameter [mm]: 88.2
• Outer Diameter 1 [mm]: 93
• Height [mm]: 131.5
• Thread Size Exit: 3/4" 16 UNF
• Name: KšTUSEFILTER
• Manufacturer: BOS

• Engine Code: 2KD-FTV
• Height [mm]: 122
• Fuel Type: Diesel
• Filter type: Filter Insert
• Outer Diameter [mm]: 72
• Thread Size: UNF 3/4"-16
• Manufacturer: MAGNETI MARELLI
• Name: MM 71760681

• Construction Year to: 04.2004
• Diameter [mm]: 95
• Material: Plastic
• Filter type: Spin-on Filter
• Height [mm]: 140
• Manufacturer: DELPHI

• Filter type: Spin-on Filter
• Height [mm]: 141
• Outer Diameter [mm]: 94
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 55
• Thread Size Entry: M 36x1,5
• Thread Size Exit: UNF 3/4"-16
• Weight [kg]: 0.581
• Manufacturer: VALEO
• Name: VA 587709

• Driven Units: Camshaft
• Trim Level: HSN
• for OE number: 1356839016
• Number of Teeth: 97
• Width [mm]: 25
• Name: HAMMASRIHM
• Manufacturer: DAY

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 86
• Seal Diameter [mm]: 63
• Thread Size: 3/4-16 UNF
• Height [mm]: 139
• Manufacturer: HENGST FILTER

• Driven Units: Camshaft
• Number of Teeth: 97
• Width [mm]: 25
• Belts: with rounded tooth profile
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 145.5
• Height [mm]: 56.7
• Thickness [mm]: 15.2
• WVA Number: 21468
• Test Mark: ECE R90 APPROVED
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 145.5
• Height [mm]: 56.7
• Thickness [mm]: 15.2
• WVA Number: 21468
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPKO

• Filter type: Spin-on Filter
• Diameter [mm]: 90
• Height [mm]: 131.2
• Thread Size: 3/4"-16UNF-2B
• Diameter 2 [mm]: 63.7
• Seal Diameter [mm]: 57.6
• Tightening Torque [Nm]: 14
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 14.6
• Net Weight [g]: 451
• Manufacturer: KNECHT
• Name: KN KC135D

• Filter type: Spin-on Filter
• Height [mm]: 145
• Thread Size: 3/4-16 UNF
• Outer Diameter 1 [mm]: 95
• Thread Size 1: M36x1.5
• Inner Diameter 1 [mm]: 66
• Inner Diameter 2 [mm]: 58
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Filter Insert
• Outer Diameter [mm]: 94
• Thread Size: 3/4"-16
• Height [mm]: 124
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
COROLLA (/E11/), 04.
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
COROLLA (/E11/), 04.
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Manufacturer Restriction: SUMITOMO
• Wear Warning Contact: not prepared for wear indicator
• Height [mm]: 56.9
• Thickness [mm]: 16.3
• Width [mm]: 145
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Driven Units: Camshaft
• Number of Teeth: 97
• Width [mm]: 25
• Belts: with rounded tooth profile
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Width [mm]: 145.4
• Height [mm]: 57
• Thickness [mm]: 15.5
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Driven Units: Camshaft
• Number of Teeth: 97
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.16
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 145.5
• Height [mm]: 56.7
• Thickness [mm]: 15.2
• WVA Number: 21468
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPANPARTS
• Additional information: PA-286AF JP
• Lisainfo: PA-286AF JP

• Filter type: Spin-on Filter
• Supplementary Article/Supplementary Info: with seal
• Gasket inner diameter: 63
• Seal Ring Outer Diameter: 71
• Height [mm]: 140
• Outer Diameter [mm]: 91
• Thread Size Entry: M36x1.5
• Thread Size Exit: 3/4-16 UNF
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Driven Units: Injection pump
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 97
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Length [mm]: 924
• Name: Hammasrihm
• Manufacturer: GAT

• Length [mm]: 145.5
• Width [mm]: 56.9
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 15.5
• Weight [kg]: 1.6
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width 1 [mm]: 145.4
• Height 1 [mm]: 56.9
• Thickness 1 [mm]: 15.5
• Brake System: AKEBONO
• Manufacturer Restriction: SUMITOMO
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 1.71
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Width [mm]: 25
• Water pump impeller material: Plastic
• Number of Teeth: 97
• Belts: with rounded tooth profile
• Weight [kg]: 0.18
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 97
• Length [mm]: 924
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Width [mm]: 145.2
• Height [mm]: 56.8
• Thickness [mm]: 15.3
• Wear Warning Contact: not prepared for wear indicator
• Brake System: Sumitomo
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Length [mm]: 146
• Width [mm]: 57
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 16
• Weight [kg]: 1.6
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 57
• Inner brake drum diameter [mm]: 270
• Name: Piduriklotside komplekt
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Manufacturer Restriction: AKEBONO
• Width [mm]: 55
• Inner brake drum diameter [mm]: 270
• Manufacturer: KAVO

• Outer Diameter [mm]: 62
• Width [mm]: 28.5
• SVHC: No SVHC present!
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: INA

• Width 1 [mm]: 28
• Outer Diameter 1 [mm]: 62
• Manufacturer: SNR

• Fitting Position: Front Axle
• Width [mm]: 145
• Thickness [mm]: 16
• Height [mm]: 57
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Sumitomo
• WVA Number: 21468
• Manufacturer: BREMBO
• Name: BR P 83 092

• Fitting Position: Upper Left
• for model code: KLH18
• Diameter [mm]: 62
• Width [mm]: 28.5
• Tensioner Pulley Actuation: Hydraulic
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• Driven Units: Injection pump
• Surface: Smooth
• Outer Diameter [mm]: 62
• Width [mm]: 28.5
• Manufacturer: GATES PASKI PRZEWODY

• Fitting Position: Rear Axle
• Width [mm]: 55
• Brake System: AKEBONO
• Inner brake drum diameter [mm]: 270
• Weight [kg]: 3.1
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Width [mm]: 145.4
• Height [mm]: 56.9
• Thickness [mm]: 15.5
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 21468
• Brake System: Sumitomo
• Article number of recommended accessories: MBA1193
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.7
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Manufacturer Restriction: SUMITOMO
• Wear Warning Contact: not prepared for wear indicator
• Test Mark: E9 90R - 01107/148
• Height [mm]: 56.9
• Width [mm]: 145.4
• Thickness [mm]: 16.3
• Supplementary Article/Info 2: with adhesive film
• Supplementary Article/Supplementary Info: with accessories
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Width [mm]: 145.5
• Height [mm]: 57
• Thickness [mm]: 15.5
• Wear Warning Contact: not prepared for wear indicator
• Fulfils ECE norm: R90
• Manufacturer: METZGER

• Operating Mode: Hydraulic
• Manufacturer: SNR
• Name: SN GT369.36

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 270
• Width [mm]: 57
• Weight [kg]: 3.21
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Width [mm]: 57
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Akebono
• Inner brake drum diameter [mm]: 270
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 270
• Width [mm]: 58
• Quality class: PJ
• Name: Brake shoes

• Fitting Position: Rear Axle
• Brake System: Akebono
• Inner brake drum diameter [mm]: 270
• Width [mm]: 58
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Front Axle
• Width [mm]: 145.4
• Height [mm]: 56.9
• Thickness [mm]: 15.5
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 21468
• Brake System: Sumitomo
• Article number of recommended accessories: 8DZ 355 202-541
• Weight [kg]: 1.7
• Name: HE 8DB355016921
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Width [mm]: 145.4
• Height [mm]: 57
• Thickness [mm]: 15.5
• Wear Warning Contact: excl. wear warning contact
• Test Mark: E9 90R-01279/470
• MAPP code available:
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: ATE

• Trim Level: TENS
• Belt Pulley Ø [mm]: 26
• Height 1 [mm]: 90
• Height 2 [mm]: 90
• Weight [kg]: 0.4
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: DAY

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 270
• Width [mm]: 55
• Supplementary Article/Supplementary Info: without lever
• Test Mark: E1 90R-011043/204
• MAPP code available:
• Name: Piduriklotside komplekt
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 270
• Width [mm]: 57
• Supplementary Article/Info 2: without handbrake lever
• Packaging length [cm]: 29.3
• Packaging width [cm]: 18.6
• Packaging height [cm]: 10.3
• Weight [kg]: 3.09
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: TEX

• Width [mm]: 57
• Outer Diameter [mm]: 270
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Weight [kg]: 3.26
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 25
• Number of Teeth 1: 97
• Manufacturer: SNR
• Name: SN KD469.15

• Driven Units: Camshaft
• Trim Level: >08/06
• Number of Teeth: 97
• Width [mm]: 25
• Length [mm]: 924
• Number of belts: 1
• Pulleys contained: 1
• Weight [kg]: 0.6
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Width [mm]: 25
• Number of Teeth: 97
• Surface: Coated
• Belts: with rounded tooth profile
• Weight [kg]: 0.77
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for model code: KLH2#, KLH1#
• Belt Width [mm]: 25
• Colour: black
• Number of Teeth: 97
• Belts: with rounded tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKMA 91711 SKF
• Additional information: VKMA 91711 SKF

• Driven Units: Injection pump
• Supplementary Article/Info 2: without tensioner pulley damper
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Number of Teeth 1: 97
• Width 1 [mm]: 25
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• for model code: KLH18
• Tensioner Pulley Actuation: Hydraulic
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• Driven Units: Injection pump
• Supplementary Article/Info 2: without tensioner pulley damper
• Number of belts: 1
• Number of tension rollers: 1
• Manufacturer: KAVO

• Number of Teeth: 97
• Length [mm]: 924
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 1
• Supplementary Article/Info 2: without tensioner element
• Manufacturer: BOSCH

• Number of Teeth 1: 97
• Width 1 [mm]: 25
• Manufacturer: ASHIKA

• Number of Teeth 1: 97
• Width 1 [mm]: 25
• Manufacturer: JAPKO

• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 7
• Weight [kg]: 0.74
• Number of Teeth: 97
• Width [mm]: 25
• Supplementary Article/Info 2: without tensioner pulley damper
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Width [mm]: 25
• Number of Teeth: 97
• Surface: Coated
• Weight [kg]: 0.96
• Supplementary Article/Info 2: with tensioner element
• Units/Pulleys: incl. hydraulic belt tensioner
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 2
• Number of Teeth 1: 97
• Manufacturer: SNR
• Name: SN KD469.23

• Driven Units: Injection pump
• Supplementary Article/Info 2: with tensioner pulley damper
• Supplementary Article/Supplementary Info: without water pump
• Observe technical data:
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• for model code: KLH18
• Belt Width [mm]: 25
• Colour: black
• Supplementary Article/Info 2: with tensioner pulley damper
• Number of Teeth: 97
• Belts: with rounded tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF

• Number of Teeth: 97
• Length [mm]: 924
• Width [mm]: 25
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 2
• Name: Hammasrihma komplekt
• Manufacturer: BOS

Supplementary Article/Info 2: with tensioner element, with tensioner pulley damper

• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 97
• Width [mm]: 25
• Length [mm]: 924
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 0.9
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Alternatively:
• Number of Teeth 1: 97
• Width 1 [mm]: 25
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: Hammasrihma komplekt
• Manufacturer: INA

• Water pump impeller material: Metal
• Belts: with rounded tooth profile
• Weight [kg]: 3.02
• Supplementary Article/Supplementary Info: with water pump
• for OE number: 13568-39016 S5
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 7
• Weight [kg]: 0.819
• Number of Teeth: 97
• Width [mm]: 25
• Supplementary Article/Info 2: with tensioner pulley damper
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Water pump impeller material: Metal
• Belts: with rounded tooth profile
• Weight [kg]: 3.02
• for OE number: 13568-39016 S5
• Supplementary Article/Supplementary Info: with water pump
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water pump impeller material: Metal
• Number of Teeth: 97
• Supplementary Article/Supplementary Info: with seal, with water pump
• Weight [kg]: 3.21
• for OE number: 13568-39016 S6
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water pump impeller material: Metal
• Number of Teeth: 97
• Belts: with rounded tooth profile
• Weight [kg]: 2.87
• Supplementary Article/Supplementary Info: with water pump
• for OE number: 13568-39016 S3
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.